Telecom broadband ZXV10 H608B wireless cat how to set up a wireless network

Telecom's wireless cat does not support automatic dialing, and the wireless network built by itself can only be used after connecting to the network through PPPoe dial-up, which is only used to dial up after connecting with a notebook that supports wireless network, and the support for mobile phones, tablets and other devices is not good.

If you need to use the wifi network, it is recommended to buy a wireless router separately, after connecting the line, set up automatic dialing, and turn on the wifi network, save and restart, you can connect and use it directly.

Hello! Hopefully, the following will be helpful to you.

To use the wifi of the wireless modem, you need to turn on the routing function of the device, and you need the administrator permission password of the device to operate, you can call the customer service to arrange the staff to set it for you. You can also purchase a wireless router to install and use, the specific installation method is as follows:

Connect the LAN port of the cat to the WAN port of the wireless router, refer to the label address on the back of the router or the instructions for use, enter the router setting interface, start from the setup wizard, set up the router according to the prompts, select PPPoe dial-up for the connection mode, fill in the user name and password, set the wireless network password (recommended letter + number combination) to save and restart.

If you still have questions, please keep asking. Have a great day, thank you!

Hello:In the case of not connecting the optical modem,Set the LAN port setting of the wireless router,Set the IP address to it,Then connect the optical modem,Then you can enter the wireless router,Then you can set other items on the router,Enter the setup wizard interface,Select PPPoe dial-up Internet access to fill in the Internet account and password,This should be understood by everyone,Open broadband will have an account,Fill it in。

I hope I have been helpful to you, and if you have any questions, please feel free to continue to consult us.

You set the wireless router WAN port to dynamic link, not PPPOE link.

1.Enter the IP address of the router in the browser.

Enter the router password to log in to the router.

2.Select Web Surfing.

settings. 3.Select a static IP address

The IP address is set to Subnet Mask.

Set to, Gateway set to, and finally set local DNS.

4.Select the Wireless Settings tab, turn on WiFi, and set up your wireless network.

name and password.

5.Click on the AdvancedSettings tab, select Intranet Settings, and change the Lanip address to.

6.After saving the settings, connect the router to the fiber modem, and the wireless network of the telecom optical silver scrambling fiber modem is set up.

Dear users, hello. We'll be happy to answer your questions. Based on the information you provide.

It is recommended that you 1First of all, buy a wireless router, set up the router steps as follows: connect the router LAN port to the computer, open the computer browser, enter the correct router IP to enter the settings interface, enter the correct account number, password, remember to set the wireless password of the router to prevent others from rubbing the network.

2.After the router is set up, connect the port of the cat to the WAN port of the router, and connect the LAN port of the router to other devices, or you can also connect to the switch, and then connect the switch to other devices. It's all possible. The ITV is connected to the LAN port of the switch or router.

3.After setting it up in this way, the computer and mobile phone can be used normally. Now fix the ITV issue.

Because after setting up the router, the ITV connection cannot be used normally. It is recommended that you can ask the staff to come to your door to set up the relevant settings for you, and all the equipment will be used normally. Because, the setting of ITV requires professionals to enter the setting interface and set it up before it can be used normally.

It is not recommended that you set it up yourself.

If you need to buy a machine and check the phone bill, please log in to the online business hall of Anhui Telecom, and hundreds of mobile phones are low prices on the whole network.

China Telecom ZXV10 H618B router connects to another wireless router Setup method: Set secondary route.

1. How to connect two routers.

1. There is a telecom cat: the telecom cat --- router 1wan port; Router 1LAN port --- router 2WAN port; The 2lan port of the router --- the computer.

2. No telecom cat: network cable --- router 1wan port; Router 1LAN port --- router 2WAN port; The 2lan port of the router --- the computer.

Second, the setting method.

Before setting, please disconnect the 2WAN port network cable of this router and plug it in after the setting is complete.

1. Set the IP segment of the second router.

After restarting the router, the address to enter the router is.

2. Set up a second router to access the Internet.

Check the IP details of the computer connected to the first router. (win+r--input, cmd--input:ipconfig all [remember: ip, mask, gateway, dns]).

Set it on the second router, and select Static IP in the Setup Wizard. Enter the IP that the first router does not use, and the others. Mask, gateway, DNS settings are the same.

Restart your router once it's set up.

It's easy to use the wireless router as a switch, just use the wireless function of the wireless router as a switch.

Set it up in this way, first go to the wireless router to set it up, turn off the DHCP service in the wireless router, turn on the wireless function, and then connect the line out of the router sent by Telecom ZXV10 H618B to the LAN port of the newly purchased wireless router, do not use the WAN port, and let it be used as a wireless switch.

ZXV10 H618B is a wireless cat, the wireless cat must be cracked correctly to achieve the wireless routing function, so that mobile phones, laptops, pads wireless Internet access. At the same time, the desktop computer has wired Internet access (no dial-up, direct Internet access).

But since you bought a wireless router, don't hack the cat. Go to the wireless router settings page, and follow the ADSL virtual dial-up (PPPoE) mode and automatic connection settings.

The first step is to connect a network cable from the computer port of your telecom wireless cat to the WAN port of the router, and then connect a network cable from the LAN port of the router to the network card of the computer.

The second step is to enter the routing settings page according to the gateway address of the sticker on the back of the router, similar to Dongdong, enter the IE address bar, and press Enter. Prompt the username and password, if there is one on the sticker, enter it accordingly.

The third step, if you come out of the wizard, according to the wizard, give the wireless a name, add a password, choose the Internet access method as PPPOE, and enter the account password of Telecom. If there is no wizard, or accidentally canceled, find the WAN settings of the network parameters, select the PPPoe Internet access mode, enter the username and password of the telecom to save, give your wireless a favorite name in the wireless parameters, set a favorite password, save, and it's OK.