What should I pay attention to when using inflatable greenhouses?

Various valves (inflation valves, exhaust valves, high and low pressure valves, safety laws, etc.) determine the embodiment of the overall performance of the inflatable tent, such as: the speed of inflation, the speed of exhaust, the constraints of the inflation limit, the advantages and disadvantages of air tightness, and the adaptability of valves in special environments .......And the material selection and design of various valves have also led to the development of charging and exhaust devices.

In addition, the choice of tarpaulin and canopy accessories also determine the practicability, applicability, and use value of the inflatable tent in a special environment. Of course, the aesthetics and humanization of its products will also affect the promotion and popularization of its products. Generally, the construction of an inflatable tent only needs two or three people to complete, and it does not take too much time to build an inflatable tent.

The dismantling process is also relatively simple, and the tent needs to be deflated and folded.

Because metal tents are all made of metal supports, they have a certain weight, so they require a lot of manpower, and loading and unloading are relatively delayed. Especially in the process of demolition, there are many unsafe factors, if you are not careful, you may hurt yourself. In addition to this inflatable structure, a type of inflatable building called frame type inflatable building has also been studied.

The so-called frame inflatable building means that the house does not need to be inflated, but the beams, columns, arches, etc., in the house, are inflated like bicycle tires. Do not use masonry, wood, steel and reinforced concrete for beams and columns. This beam and column, once inflated, has good rigidity and is very strong.

Finally, on the "skeleton" built by inflatable beams and columns, it is covered with film materials such as plastic cloth and glass fiber cloth, and anchored to the ground with ropes, which becomes a kind of inflatable building. It has the advantage of not having to inflate the entire interior of the building, thus reducing the cost of constantly replenishing gas and leak-proof equipment. The downside is that it's not as easy and quick to build as it is to inflate inside.

If you find that there is an air leak, you can first wipe the air column clean and then apply soapy water to the surface to check the air leak point. If the air leak point is a small hole, you can use a small piece of round repair fabric (which is included in the standard configuration of any size of inflatable tent), and then brush the glue, and after the glue is dry (important, it must be after waiting for the special glue to dry) to stick it to the leak point, and the bond is tight. If the air leak is opened at the thermal joint of the air column, it can be dealt with in the following steps:

Clean the adhesive surface first. The inflatable tent will be given a bottle of glue, special glue for the air column of the inflatable tent, and it must be brushed on the pre-adhesive surface, which must be evenly painted and the thickness is appropriate. The shape of the adhesive interface should be designed as round or oval, and the shape of the square and acute angle interface should be avoided as much as possible, and the lap width should not be less than 30mm.

After the glue is evaporated, it can be bonded, the patch must be flat, no wrinkles, rolled, scraped, and at the same time use a hair dryer to supply a heat source to facilitate bonding. After 6 hours of bonding, it can be inflated and used.

The process is produced by the combination of adhesive bonding and high-frequency heat sealing, the air column is made of PVC double-sided coated cloth, and the tarpaulin is made of waterproof and anti-ultraviolet materials, which has the advantages of fast molding, high strength, fireproof, mildew-proof, ultraviolet-resistant, moisture-proof and so on. The tent is an inflatable tent, and the tent frame is an air column structure, which has the characteristics of light weight, small size after folding, and convenient and easy to carry compared with general metal support tents. Relatively speaking, the erection of inflatable tents is very convenient, you only need to spread the tent on the open space, connect the foot pump or electric pump, only two people, can be erected in a few minutes.

Inflatable tents only need to be filled with gas during use, and they are easier to use than metal tents in terms of folding, and the weight is obviously very light, so it is easier to transport. Tents with metal brackets are made of metal, and there are more brackets and the weight is relatively large. Especially in the construction of a relatively large tent, a lot of brackets are required, which will inevitably waste a lot of manpower to complete.

In order to implement the early notice of the Propaganda Department, the State Education Commission, the Ministry of Culture, and the Ministry of Education on strengthening the patriotic education of young people, in order to better promote the projection of rural digital films, Zhengzhou Xiangyu Inflatable Model has developed an innovative patented product BX-CYG6 (patent number: portable inflatable theater, this product is a combination of textiles, composed of arch beams and tarpaulin links, and is a new generation of mobile projection equipment. Choose a site about 30 meters long and 15 meters wide, require a smooth and free debris, pull the film studio apart in the order of front, middle and back, ensure that the inflatable pipe is on the same side, combine according to the order of the film studio, start from the middle and interlock the hook on the studio and the corresponding ring, the adhesive belt is firmly connected, there can be no gaps, check whether the vent is closed, whether the arches at both ends are tied with ropes, connect the fan with the inflatable port and then inflat, assist it to stand and strengthen the studio, dismantle the procedure, after the screening, organize the Guanchai Hengzhong to leave the greenhouse safely, Turn off the power, untie the inflatable cylinder, vent the air port, wait for the studio to automatically land, untie the connecting buckle and fixed rope, open the hook and loop buckle, fold along the direction of the arch beam, try to discharge the residual odor in the arch beam when folding, put the folded studio into the packaging bag, special tips, this product is a combination of textiles, which can effectively avoid the danger of smashing and pressing, such as the slow fall of the greenhouse due to power failure, do not panic, evacuate from both sides in a rapid and orderly manner in accordance with the operating procedures, and avoid stampede injuries caused by crowding. When this product is used in rainy and snowy weather, the inflator should be properly bent or bundled to reduce the air intake by 50%-60%, otherwise the fabric structure will be damaged due to excessive expansion, resulting in the scrapping of the product.

Inflatable tents are mainly divided into: frame inflatable tents and integral inflatable tents. The frame inflatable tent is in the form of an air column frame, and the airbag is made of PVC-coated cloth with high crack brother frequency heat combination, and the electric pump or foot pump can be quickly formed by inflating.

The side wall of the integral inflatable tent and the canopy cover are combined into an arch, and the doors and windows are opened on demand by the mezzanine at both ends to form a special tent canopy with overall inflatable thermal insulation and sound insulation; It has the characteristics of high rigidity, strong stability, sound insulation, heat preservation, molding and fast speed. It is relatively simple and quick to set up and disassemble, and you can install or disassemble it in a very short time to save your precious time; Better heat preservation, inflatable tent is made of high-quality PVC waterproof canvas, tear resistance, better tensile strength, better aging resistance, and long service life. It is safe to use under the action of self-weight and class 8 wind load, and has a continuous service life of more than 5 years.

Inflatable greenhouses have a layer of air in the middle of the double-layer film, so the insulation effect is better, and the temperature is 5 6 higher than that of single-layer greenhouses. By using the tension of the film after aeration, the number of columns and arches can be reduced, and the cost of building a shed can be reduced. Its deficiency is due to the limitations of welding technology, the greenhouse leaks quickly, needs to be constantly inflated, and the light transmittance of the double-layer film is low, which also affects the growth of crops.

According to the skeleton structure of the greenhouse, there are yurt greenhouses, steel wire suspension greenhouses and other types, which are not widely used in production, so they are not described.

Inflatable tents are mainly divided into: frame inflatable tents and integral inflatable tents. The inflatable tent is made of air column frame, the airbag is made of PVC coated cloth with high frequency heat combination, and the electric pump or foot pump can be quickly formed by inflating.

The side wall of the integral inflatable tent and the canopy are combined into an arch, and the doors and windows are opened on demand by the mezzanine at both ends to form a special tent with inflatable thermal insulation and sound insulation for the whole body; It has the characteristics of high rigidity, strong stability, sound insulation, heat preservation, molding and fast speed. It is relatively simple and quick to set up and disassemble, and you can install or disassemble it in a very short time to save your precious time; Better heat preservation, inflatable tent is made of high-quality PVC waterproof canvas, tear resistance, better tensile strength, better aging resistance, and long service life. It is safe to use under the action of dead weight and level 8 wind load, and has a continuous service life of more than 5 years.