How to set the DingTalk reminder sound, why there is no message prompt sound in DingTalk

Method Steps:

1.Install and launch DingTalk on your phone.

2.Once you're on the screen, select "Mine" at the bottom right

3.Then on the "My" page, check "Settings".

4.Once in the settings, select "New Message Notification".

5.Then go to the page and select the "ding" message.

6.Finally, this page can be set to switch vibration and sound.

Extended Information: Tips to Extend iPhone Battery Life:

1.Make it a good habit to recharge.

Charge the battery in time when the iPhone prompts a low battery to avoid automatic shutdown caused by too low a battery, and try to replace the battery if the battery efficiency is less than 80%.

2.Turn on Optimized Charging.

This function can intelligently learn and judge the user's usage and charging habits, so that the charging process is more balanced, thereby slowing down the aging of the battery and improving the battery life of the iPhone to a certain extent.

How to view: The "Optimize Battery Charging" function can be viewed in Settings - Battery - Battery Health

3.Disable background apps.

Flushed. Apps use battery life when running in the background. You can see how much time the app is running in the background.

If an app runs out of too much power when it's not in use, you can disable background app refresh to prevent it from running in the background. If the app is draining too much battery, we can also choose to uninstall it!

4.Enable Low Power Mode.

The "Low Power Mode" feature allows your phone to save more battery. When Low Power Mode is enabled, your screen dims slightly, restricting background processes, slowing down your processor slightly, or reducing the amount of energy your device needs during normal use.

How to do it: The easiest way to enable this feature is to swipe down from the top right corner of your iPhone and then the battery icon. Or you can enable the low power mode in Settings > Battery > Low Power Mode.

Push app notifications, emails.

Reading notifications and more can shorten battery life, so it's best to turn it off to make your iPhone battery last longer. Notifications can be turned off in "Settings" for each app.

1. Mobile version:

1. Step 1: Open DingTalk in your phone, Step 2: Click on your own name in the upper left corner, select Settings, Step 3: Find the new message notification, and click to turn on;

2. Computer version:

Step 1Open the DingTalk software in your computer, Step 2: Click on the name avatar in the upper left corner;

2. Select the system settings, here we can turn on the message prompt sound and notification sound, and you can set DingTalk.

The reason why there will be no sound reminder when there is a message in DingTalk may be that the letter from DingTalk on the mobile phone is not opened, you can go to the settings of the DingTalk software to take a look, turn on the prompt sound, or turn up the volume of the prompt sound.

DingTalk is a leading smart mobile office in China.

Platform, by Alibaba Group.

Developed and officially launched in January 2015. The platform is provided free of charge to all Chinese enterprises for business communication and work collaboration, helping Chinese enterprises to improve the efficiency of communication and collaboration chain inspection of Chinese enterprises in an all-round way through systematic solutions. On June 11, 2017, Ali Dingding.

version, new features. The new version introduces the model house.

DingTalk index, jujube staring, three major functions.

On August 24, 2018, DingTalk launched the "Spring Rain Plan". According to the CEO of DingTalk, Chunyu plans to focus on supporting outstanding application developers and service providers in the DingTalk ecosystem to promote Chinese enterprises to realize intelligent mobile office in the cloud and mobile era. On November 12, 2018, the "DingTalk Space" created by Alibaba DingTalk announced that it was officially put into operation in Hangzhou, including Aozhe, Magic Point, Everymoment, Ding Shuibao, Mingme, Franco, Hengsheng Juyuan, Manwo, and Lanling.

Clank, probe.

and other 10 DingTalk ecological partner enterprises are the first batch to settle in.

Summary. If you receive a DingTalk message but there is no sound, you can check it by following the steps below: 1. Check whether the reminder is turned on in [Mobile Phone DingTalk] - [Avatar] - [Settings] - [New Message Notification] or [Computer] - [Avatar] in the upper left corner - [System Settings] - [Notification] - [Message Prompt Sound]; 2. Check whether the system volume of the mobile phone or computer is turned on; 3. If the mobile phone and the computer are logged in at the same time, the mobile phone DingTalk can click [DingTalk PC version logged in] at the top of the message interface - turn on and turn off [Stop mobile notification]; 4. If there is no prompt sound when receiving messages when the phone screen is black, it may be that the mobile phone system has automatically cleaned up the background running software and cannot receive notifications, and it needs to be set to run in the background.

If you receive a DingTalk message but there is no sound, you can follow the steps below: 1. Check whether the reminder is turned on in [Bury Peixiang Mobile Phone DingTalk] - [Avatar] - [Settings] - [New Message Notification] or [Computer] - [Avatar] - [System Settings] - [Notification] - [Message Notification]; 2. Check whether the system volume of the mobile phone or computer is turned on; 3. If the mobile phone and the computer are logged in at the same time, the mobile phone DingTalk can click [DingTalk PC version logged in] at the top of the message interface - turn on and turn off [Stop mobile notification]; 4. If there is no prompt sound when receiving messages when the phone screen is black, it may be that the mobile phone system has automatically cleaned up the background running software and cannot receive notifications, and it needs to be set to run in the background.

Can you elaborate on that a little bit more?

If you receive a DingTalk message but there is no sound, you can follow the steps below: 1. Check whether the reminder is turned on in [Bury Peixiang Mobile Phone DingTalk] - [Avatar] - [Settings] - [New Message Notification] or [Computer] - [Avatar] - [System Settings] - [Notification] - [Message Notification]; 2. Check whether the system volume of the mobile phone or computer is turned on; 3. If the mobile phone and the computer are logged in at the same time, the mobile phone DingTalk can click [DingTalk PC version logged in] at the top of the message interface - turn on and turn off [Stop mobile notification]; 4. If there is no prompt sound when receiving messages when the phone screen is black, it may be that the mobile phone system has automatically cleaned up the background running software and cannot receive notifications, and it needs to be set to run in the background.

If there is no sound in the microphone, check your settings first, and see if there is a normal permission to open the microphone.

<>4. Right-click the sound icon in the taskbar in the lower right corner of the desktop and find "Open Volume Synthesizer".

5. Remove the mute button of the DingTalk meeting.

Hello, I'm answering for you: are you an Android phone or an Apple phone?

There are several possible reasons why there is no sound in DingTalk screen recording: 1. The device is set to mute, and there are network problems; 2. The microphone of the partner participating in the remote meeting is not turned on; 3. The DingTalk recording permission is not enabled in the settings, or the host has turned on the silent joining mode; 4. At present, the audio files in the meeting only support Windows system computers; 5. The sound of the device is occupied by other functions.

1.Set mute to enter DingTalk and click "All Mute"; All participants are allowed to unmute freely; Force mute: Participants are not allowed to unmute, only the host can operate;

2.When you don't need to speak to set the microphone, click to turn off the "microphone"; When speaking, turn on the "microphone" so that others can hear what you say; 3.Set the speaker, the phone is not convenient to put in the ear, just turn on the "speaker".

We're happy to answer for you, is there anything else I can do to help? If you think it is helpful to you, please click on my review in the bottom left corner and give me a like! I hope I can help you and I wish you a happy life!

There is a sound in the DingTalk settings, if there is no sound, you may have set the phone to silent.

Hello, what function to use when you want to set it, you can use the problem in the mobile phone DingTalk - message - upper left corner [avatar] - service hall - **consultation feedback** service staff, we understand the details.

This can turn off the sound of ** or set the message to DND mode.

DingTalk has no sound how to set,You can adjust the volume of the sound,

Step 1 Open DingTalk, click the avatar in the upper left corner, step 2 click [Settings], select [New Message Notification], find [Voice Kuanhui and **Call Invitation Notification] to set it carefully, and the rear button is blue for on and white for off.

First log in to DingTalk with your mobile phone, enter the work interface, and the word attendance punch will appear, and click it. Enter the settings interface. After entering the settings interface, the word Personalization will appear at the top, click Personalize.

After entering the interface, the words clock-in reminder and clock-in reminder will appear. You can click on the clock-in reminder or clock-in reminder to set it up as needed. Setting" Turn off saving, and the setting will take effect.

Hello, if you turn on the [Quick Punch Out] at work and off work, there will be a voice and vibration reminder after the clock-in is successful, and you can also set it to turn on or off by yourself.

Employee setting path: Open [Mobile DingTalk] - click [Work] - [Attendance Punching] - [Settings] - [Quick Punch Method] - Turn on and turn off [Quick Punch Signal and Vibration].

The administrator sets the path (only for the administrator himself): Open [DingTalk] - click [Work] - [Attendance Clock-in] - [Settings] in the lower right corner - [Personal Settings] at the top - [Quick Punch-in Method] - Turn on and turn off [Quick Punch-in Success Sound and Vibration].

When using DingTalk clock-in, if you want to turn off the sound, then you can select Mine, and then there is a mute in the Settings in Mine.

If you want to turn it off, you can check the prompt sound in the settings, just remove it.

This sound can be passed directly, the speed is very easy, generally I do this, of course you can do it in other ways.

How do you turn off the sound of punching in? Let's tell the truth, DingTalk punch in the sound, I don't know how to turn off, you can put the whole phone can.

How to turn off the sound of DingTalk punch card? Well, I don't know about this level, you can turn the sound of your phone to the minimum, so that you can't hear the sound of ding ding.

You can go to DingTalk's personal page, and the prompt sound of DingTalk is turned off, and it will no longer be reminded after it is closed.

Hello, open the mobile phone DingTalk - attendance punch - settings - quick punch card - speed punch card - speed punch card prompt sound - commuting can be set to close.

How to turn off the sound of DingTalk punch clock, you can consult the DingTalk system administrator.

Take Huawei Mate30, EMUI10, and DingTalk versions as examples, and the specific operation methods are as follows:

1. Open the DingTalk app on your phone, find and click on your avatar in the upper corner of the interface next to Zuodou Brigade.

2. Click the settings option in the avatar interface, and select the new message notification in the pop-up options interface.

3. Find the normal message, ding message and @me message in the new message notification interface.

4. Check whether the prompt sound of the message is turned on, if not, you need to set the prompt sound for these messages separately, and then return to the desktop after setting.

When there is no sound prompt when the message comes from DingTalk, you can check whether the mute function is turned on on the phone, check whether you accidentally slide the mute button on the side of the phone, if you turn on the mute function on the side of the empty oak, you only need to slide the mute button of the phone back again. In addition, you can also check whether it is a problem with the system settings, open the settings of your phone, and then tap the general option in the settings, find and open the restore option in the general interface, and then tap Restore all settings in the interface.

This answer is for the DingTalk version.