How to modify the default startup items in XP and YLMF Linux 2 0 dual systems? How to modify the boo

I don't see anything different.

To change the boot sequence and waiting time of the dual system, you can change the default boot system options in the computer boot properties settings after logging in with the Windows system, and adjust the waiting time at the same time.

1. Enter your Windows system first, then right-click on My Computer, pop up the menu and select "Properties";

2. Then in the system management window, click "Advanced System Settings" in the left list to enter the advanced settings of system properties;

3. In the system properties window, click the "Settings" button under the "Advanced" tab to enter the specific settings of the system startup;

4. At this point, we will look at a "default operating system" option in the "Startup and Failback" window, if you are a dual system, in this drop-down list, you will see a "Windows", a "Linux" (I only have a single Windows system, so there is only one here).

Note: If you want to change the default boot system to Linux, you can simply select Linux from the list.

5. After setting the default system, there is a "time to display the list of operating systems" below it, this time is the waiting time to enter the system, which can be set freely, such as setting it to 2 seconds, then when the computer starts, there will be a waiting time of 2 seconds, the setting is completed, continue to click OK;

Note: If you want to stay in the boot operating system selection list for a short time, you can check the "time to display the operating system list", and then specify the specific waiting time, such as 5 seconds, the effect of this setting is that we can have 5 seconds to choose the operating system to use when we boot up, if you don't choose within 5 seconds, it will automatically enter the default system.

6. Finally, click OK to wait for the system to take effect to complete the setting, restart your system, and you can see that the default boot order has changed.

In the environment where both Windows and Linux systems are installed, it is often necessary to install the Windows system first and then the Linux system, because the Linux bootloader can recognize it.

Windows system, and the Windows bootloader does not recognize the Linux system, and if you install Linux first and then install Windows, the Windows bootloader.

The Linux bootloader will be overwritten, making Linux unrecognized.

The default first boot system is Linux, if I want to change the default boot system to Windows, how do I do that? The steps are as follows:

1. Log in to the Linux system as root;

2. Start the terminal, enter the command: vi boot grub, and the file content is as follows:

#boot=/dev/sda

default=0 (the setting of which system is started by default, here the Linux system is started by default).

timeout=5 (the length of time in seconds to start the system, allowing the user to manually select the system to start).

title centos linux as

title windows server 2003

title other ..

Each title represents a system, and the system code starts from 0, so you want to start Windows by default

server 2003, set default=1).

Save the file after modification, restart the system, and you can enter the Windows system.

PS: If you want to adjust the order of the system in Grub and add or remove the system name, you can modify the title in the file.

If you want to wait for the time, change the timeout=5 option, and change it to a number to indicate how many seconds you have to wait.

Go to linux, change boot, if this file doesn't exist, it's boot grub

There's a 10 in it, just change it to 1.

Linux, modify the boot partition.

Under win7, you can use win7 optimization master to change.

You can set up the grub into your MBR.

Then modify it with a modification.

Right-click on My Computer --- Properties--- Advanced --- Startup and Failback --- Settings --- Default Operating System.

Install the dual system, boot into the win7 system, and then follow the steps below:

1. Right-click in "Computer", select "Properties", and select Advanced System Settings.

2. In the system properties dialog box, select "Advanced" and "Settings".

3. Press the triangle in the default operating system to switch the system that needs to be started.

4. Press OK to save. It takes effect when restarting.

Click Start Run inside and type msconfig. Then OK, click. Inside is the boot order, you choose Linux or win7, click up or down to change the boot order.

Linux's boot grub is just that. If it was ubuntu, he used the grub2 file name probably .

Just open it and look at the content, and adjust the order of the relevant lines. Ubuntu's grub2 configuration content is more, easy to mess up, this is not recommended to adjust the order, at most change the default startup items are the first.

Win7 doesn't recognize Linux? If you recognize it, modify it under win7. Computer -- Properties -- Advanced System Settings -- Advanced -- Startup and Failback --- Settings -- System Boot -- Default Operating System.

The last system you installed was changed in the last system;

There are many ways to do this, it is recommended to use rabbits or masters; There are good tools to use (startup) inside;

If it's manual, you have to change it, I'm afraid that I won't understand you, so I can't say it, you can also see "start" in "Run msconfig";

You need to go to Linux to modify, and the second one is correct.

Why not use fedora?It's more cumbersome but powerful.

Ubuntu is simple and even supports double-click installation and double-click uninstall under Windows.

I haven't used linux, but XP is right-click on my computer > Advanced > Startup > Recovery > Settings >> Select the system you want to default to OK.

grub itself can, by default, wait for a period of time without selection and automatically enter the preset system.

Modifying Boot Grub can change the length of time, the preset system, and the interface style.

Go to the Linux system and run the following command:

vi /boot/grub/

The above command opens the boot file, and finds the "default" item, which indicates that item is used as the default startup item, for example, there are two items in your boot menu, the first item is linux, and the second item is windows, then "default=1" means that linux is started by default, and "default=2" means that windows is started by default.

The "timeout" item is to indicate how many seconds to enter the default system without manual operation, "timeout=1" means 1 second, 2 means 2 seconds, and so on, of course, "timeout=0" means that the item must be manually selected and pressed enter to start the selection, otherwise it will stop at this screen and do not move.

The above conditions are: the boot partition is a Linux system.

1. The file can be modified.

Found on the C drive.

Remove the read-only attribute.

Open the file. boot loader]

timeout=3 (wait time).

default=multi(0)disk(0)rdisk(0)partition(1)\windows

operating systems]

multi(0)disk(0)rdisk(0)partition(1)\windows="microsoft windows xp professional" /noexecute=alwaysoff /fastdetect

multi(0)disk(0)rdisk(0)partition(2)\windows="microsoft windows xp home" /noexecute=alwaysoff /fastdetect

Change default=multi(0)disk(0)rdisk(0)partition(1) in windows to the serial number you need to start by default and save it.

2You can also right keyboard my computer - Properties - Advanced - Startup and Obstacle Recovery - Settings - Default operating system, select your default system to confirm it.

Set to display all files, including system files

Found on the C drive.

Modify the read-only attributes.

Open the file. boot loader]

timeout=3 (wait time).

default=multi(0)disk(0)rdisk(0)partition(1)\windows

operating systems]

d:\windows="microsoft windows vista" /noexecute=optin /fastdetect

Add default=multi(0)disk(0)rdisk(0)partition(1) windows

and d: windows="microsoft windows vista" /noexecute=optin /fastdetect

Just swap places

Then save

1. You must install XP first, not the other way around.

2. In the process of installing linux, you can set the default startup 3. After the installation is completed, you can also modify the default startup again through the grub configuration file of linux.

This is a simple problem, you can solve it by reading more basic books.

I install win7 first, and then ubuntu, and the default startup item is ubuntu.

It depends on what system you installed first.,Set it in the system after installation.,If it's linux that is pressed later, it will automatically start from linux when you boot up.。

If you want windows, just right-click on my computer properties.,There's a selection of the order in which you want to boot up.。。

Go to Linux System Start - Control Panel - Startup Management Select XP as the default boot option.

Or in the boot directory, in a file.

Change the value of default to 1 if it is 0 and 0 if it is 1