How to fix the computer screen blur, how to fix the computer screen blur

Immediately after booting, press f8 to the advanced option to appear in the let go,Select "The latest correct configuration" Enter to repair,It is not possible to press F8 to enter the safe mode to restore the system or reinstall the system (if the reinstallation is also a blurred screen,It is recommended to overhaul it,If you can enter the safe mode,It means that you have installed something inappropriate,Uninstall all the inappropriate things before the accident,Or restore the system or reinstall)。

First soft and then hard, such problems are caused by software conflicts, inappropriate drivers, and system problems, you can restore the system in safe mode, or not reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it.

If there is a hardware, take out the motherboard battery and put it on the charge, plug and unplug the memory, clean the graphics card, check whether there is a problem with the hard disk, and if it doesn't work, just overhaul it.

It's really not possible to reinstall the system, if you can't reinstall it yourself, go to the maintenance there to find a maintenance person to help you, it should take a little to spend it, if you can't turn on the machine by any method, this is a sudden shutdown, caused by disk damage, one is to deduct the motherboard battery and put it down, one is to put it for a period of time in the boot to try, or you can't repair it.

Hope it solves your problem.

1. Clean up computer junk and antivirus. 2. Clean up the computer dust or replace the motherboard chip.

Specific workarounds:

1、The screen is caused by the graphics card driver,Some drivers and upgrade drivers on the Internet,The compatibility between the computer itself and these drivers is not very good。 If you want to install your own computer brand driver, you can avoid blurred screens.

2. The computer temperature rises and causes the screen to blur. You can use the computer's built-in security software and anti-virus software to clean up the computer junk and anti-virus.

3. The computer screen is caused by the dust of the computer itself. The computer generally needs to be cleaned of dust, and the after-sales department needs to clean the computer, which is more thorough.

4. The blurred screen is because the graphics card is broken, and it can also be a fault of the motherboard chip. These situations must be handled by the brand's professional maintenance department.

What to do if the computer monitor has a blurred screen.

Summary. How to fix the computer screen pro, hello! The first type:

Reasons for the flickering of water ripples in the display: there is strong electromagnetic interference around; Poor quality of VGA, DVI, HMDI display cables; Monitor refresh rate mismatch solution: Remove the source of interference; Replace (or re-plug or re-plug or clean) the display cable; Manually (or automatically) adjust the refresh rate Type 2:

Causes of blurred screen and black screen of the display: power cord failure; The display cable interface is loose, and the resolution is not suitable; graphics card hardware failure; display failure; Poisoning. Workaround:

Replacement of cables; tighten the wire; adjust the resolution; Replace the graphics card; Replace the display; Antivirus. Hope it helps!

How to fix the computer screen pro, hello! The first type: the reason for the flickering of the water ripple in the display:

There is strong electromagnetic interference in the surrounding area; Poor quality of VGA, DVI, HMDI display cables; The solution to the mismatch of the display refresh rate: move the grip to remove the interference source; Replace (or re-plug or re-plug or clean) the display cable; Manually (or automatically) adjust the refresh rate of the segment discussion The second type: the display screen is blurred and the screen is black

power cord failure; The display cable interface is loose, and the resolution is not suitable; graphics card hardware failure; display failure; Poisoning. The solution is durable: replace the cable; tighten the wire; adjust the resolution; Replace the graphics card; Replace the display; Antivirus.

Hope it helps!

Hello dear! Method 1: 1. Right-click My Computer, click Computer Management; 2. Click Device Manager; 3. Click on the display adapter; 4. Right-click the content to uninstall it; 5. Under normal circumstances, there is a lot of failure probability of the data cable, and in most cases, the two plugs of the data cable are replaced and plugged in, and in most cases it will be fine.

This is due to the fact that the data cable and the display are not in good contact. Method 2: 1. Right-click the blank reed width position on the computer desktop and select "Display Settings"; 2. Find and click "Advanced Display Settings" on the page; 3. In the advanced display settings, click "Display Adapter Properties of Monitor 1"; 4. Select "Monitor", select the screen refresh frequency of the appropriate bridge state, and click OK.

Hope it helps!