Car display: Sorry the system interface has stopped working?

1. Too much program cache: in the phone settings - applications.

All - find the program that appears to stop running - clean the data; (Most mobile phones can be solved by this method);

2. The memory of the mobile phone is too low: the system runs many programs, the memory is insufficient, in Settings - Application - Running, close other background running programs;

3. The installation position is incorrect: enter the settings - storage - preferred installation location - determined by the system and change the storage position. The program is incompatible: It is recommended to uninstall and reinstall the program or uninstall some programs that are incompatible with the system;

A prompt to stop the operation appears. (This situation can be concluded by comparing several machines of different brands);

5. If the operation still stops after excluding the above methods, it is recommended to restore the factory settings.

Or reflash the firmware.

If the installation location is incorrect, go to Settings - Storage - Preferred Installation Location - Determined by the system, change the storage location. The program is incompatible: It is recommended to uninstall and reinstall the program or uninstall some programs that are incompatible with the system; Problems with the program itself, some programs have problems with themselves, such as problems with the software components in the early stage, causing the program to stop running.

It is because the screen time is used for too long, which causes the power supply module to failNot only is there a stuttering situation, but also a serious black screen phenomenon. Because there are flaws in the circuit design. However, problems such as module anomalies and design defects are beyond the scope of the solution, and they need to be inspected and repaired in a repair shop or replaced directly.

In fact, there are various faults in the central control screen, which has a lot to do with the installation process, after all, this project needs to contact more complex lines.

Precautions for use.

The temperature in the car in summer is particularly high, and it can reach more than 60 degrees when it is high, so when we buy these on-board electronic products, or install some car electronic products, we must pay attention to buying a larger brand as much as possible, because these big brands.

I have done high temperature and low temperature tests, especially high temperature tests. Dash cam these things, because some of them are with lithium batteries, so if you have not been tested at high temperatures, lithium batteries are also high temperatures, and the whole car is lit, which is a big trouble.

Why don't the buttons on my monitor respond?

It is this central display that will show that the system interface is down. If this fault occurs, it means that there is a problem with the software system in the central control display, and it cannot operate normally or the circuit board inside is faulty. You can disconnect the negative electrode of the electric number Ling dry bottle for a minute and then reconnect it to try, if it still doesn't work, this needs to be detected, the circuit board in the central control display screen needs to be removed and detected, if there is a problem, the potato hole needs to replace the entire display.

Summary. Dear, hello, I'm glad to answer for you, the car screen has been popping up and stopped running, the reasons are as follows: open the engine cover, remove the negative pole of the battery line, wait for about a minute, and then install it to try, the system program problem is caused, you can break the negative pole of the battery wire, restore the program to try, first, the display screen internal system short circuit caused by the second, the display software program version upgrade Third, the internal fault of the display screen According to the analysis of the above three reasons, it is generally normal that the software needs to be upgraded. Therefore, it is necessary to go to a professional 4S store for upgrade processing.

What's going on. Dear, hello, very high stop burning Mingxing for your answer, the car screen has been popping up to stop running, the reasons are as follows: open the engine cover, the negative pole of the battery line is removed, wait for about a minute, and then install it to try, the system program problem is caused, you can break the negative pole of the battery line, restore the program to try, first, the display screen internal system short circuit caused by second, the display software program version upgrade Third, the internal fault of the display screen According to the above three reasons analysis, a section of the normal software needs to be upgraded, Therefore, it is necessary to go to the professional 4S store for upgrading.

Yes. The reasons are as follows: the thug closes the engine cover, disassembles the negative pole of the battery line, waits for about a minute, and then installs it to try, caused by the system program problem, you can break the negative pole of the battery line, restore the program to try, first, the internal system of the display screen is caused by a short circuit in the second state, the display software program version is upgraded Third, the internal fault of the display screen is based on the analysis of the above three reasons, the general normal is that the software needs to be upgraded, so it needs to be upgraded to a professional 4S store.

Caused by system file corruption, an error in Explorer loading a third-party plug-in, or a conflict after some software installations.

In this case, the owner needs to go to the car store to apply for after-sales, and through the view of reliability history function of the Windows system reliability monitor, you can quickly find the program that affects the stability of the system.

The Reliability Monitor provides a general picture of system stability as well as trend analysis, with details on individual events that may affect the overall stability of the system, such as software installations, operating system updates, and hardware failures.

There should be a problem with the program.

You can first disconnect the negative pole of the battery cord and resume the program. If it doesn't work, you need to go to the 4S store to re-flash the system program.