A detailed explanation of the best way to use a facial steamer

Updated on vogue 2024-03-06
6 answers
  1. Anonymous users2024-02-06

    The best way to use the facial steamer is as follows:

    1. Clean your face with warm water first, preferably wash all the dirt and oil, and then prepare a basin of warm water to clean the steamer sink.

    2. Pour some cold boiled water boiled and cooled in advance into the water storage tank, do not use the tap water that has just been connected, because there will be some impurities in it, and it will cause blockage and other injuries with the steam drilling into the process of steaming the face.

    3. After that, plug in the plug and prepare to steam your face, at this time, keep the distance between your face and the spray mouth, not too close, so as not to burn the hot steam.

    Face skin, don't be too far away, the effect is not ideal, keep it at about 20cm is the most suitable, the time of fumigation of the face steamer should be noted, the time and frequency of different skin and different forms of steam are different.

    4. After steaming your face, use a cleanser with strong cleansing power.

    Re-cleansing not only removes deep dirt and oil, but also exfoliates the face to help remove dead skin.

    Activates skin cells and promotes renewal.

    5. After applying some astringent water, it can play a better role in tightening pores than using it alone. Don't forget to clean the water weeds and spouts of the facial steamer, seal and store them well.

    The main principle is to directly heat and convert the water poured into the water storage tank in advance into nano-level high-temperature mist particles, fumigate the face with steam, open pores, discharge toxins, and accelerate blood circulation in the face.

    Mobilize** to restore the original elasticity, shrink pores, and remove blackheads.

    can be realized.

    Notes:

    1. Generally, steaming for 10 minutes is enough, and if it is sensitive skin, it only takes 5 minutes; If it is not hot steaming, but cold steaming the face, it will take 20 minutes, the time required in winter will be appropriately extended, and the summer will be shortened accordingly, general skin care can be carried out 2-3 times a week, if Chinese herbs or essential oils are added to the water to ** a certain skin problem, you can do it once a day.

    2. It is necessary to do a good job of pre-cleansing and post-skin care;

    3. Pay attention to the spray condition during the steaming process, and the amount of water should not exceed the warning line, so as not to affect the effect of steaming or cause accidental injury.

  2. Anonymous users2024-02-05

    1. Cleanse your face before using the facial steamer. When using the face steamer, add distilled water to check whether it is clean, and clean it if it is not clean. When steaming the face, it is best to stay 20cm away from the nozzle for about 10 minutes.

    2. Wash your face with Qiao Lifeng's cleansing cleanser immediately after steaming. After cleansing, wash your face with cold water or compress it, and then apply to protect and broaden the skin.

    3. Distilled water should be used for the facial steamer, and the number of times of use should not be frequent, and it should be checked before use.

  3. Anonymous users2024-02-04

    1. Use the facial steamer after cleansing.

    The facial steamer must be used after cleansing, because the facial steamer volatilizes steam through the principle of heating water, and helps the pores open through the principle of thermal expansion and cold contraction of the facial pores of the steam, so as to carry out the second layer of skin care. Therefore, the facial steamer must be used after facial cleansing, so that there will be no clogged pores after the pores are opened, absorbing the dirt of the face.

    2. The use time of the facial steamer should not be too long.

    The good use time of the facial steamer is about 3-5 minutes, because long-term facial steaming will not only not open the pores and moisturize and promote facial blood circulation, but will evaporate the facial moisture, resulting in dryness and lack of water in the face, which is also the reason why many people react to the steamer and drier the more it is steamed.

    3. Moisturize your face in time after steaming.

    The facial steamer is equivalent to a hot towel wet compress on the face, and the heating of the facial pores through the facial steamer helps to help the pores open, so that when the follow-up application is carried out and skin care products are applied, it is more conducive to the absorption and digestion of the face.

    4. Use distilled water for steaming water.

    The water in the facial steamer must be distilled water, because distilled water is formed after high temperature heating and evaporation, and its water quality is cleaner and more hygienic than mineral water and pure water, so that it will not affect the ** after being absorbed by the open pores in direct contact with the face.

  4. Anonymous users2024-02-03

    1. Clean your face, whether you have makeup or not, you need to clean the oil and dirt on your face first.

    Second, the plugging section lacks a power supply, press the start button, and start steaming. It should be noted that the steaming time is generally about 10 minutes when a bottle of water is filled, but if you have sensitive skin, it should be shortened to about 5 minutes.

    3. Wash your face again after steaming. The water mist of the facial steamer has the effect of opening pores and washing away dirt. After steaming, you need to prepare a basin of warm water to clean the dirt on your face.

    4. Cold compress and skin care. This is one of the more important steps, as the water mist is hot, all the pores on the face are opened, and a cold compress is required to shrink the pores. Prepare a cold towel to apply it to. After the cold compress, moisturizing skin care products can be applied.

  5. Anonymous users2024-02-02

    The correct use of the facial steamer and precautions are as follows:

    How to use: First of all, the state is cleaned**, if there is dust or dirt left before use**, and the pores are opened when steaming the face, the dust will enter the pore movement god, which will clog the pores and make the **state worse. Add cold water to the facial steamer, it is recommended to use purified water, and then the steam comes out to steam your face.

    Note the luck of the divine will: pay attention to the frequency of use, two or three times a week is fine, no more** may not be able to stand it. When steaming the face, don't be too close to the instrument, because the dimension of steam is also relatively high, and the most suitable distance is about 20cm.

    Facial steamer brand recommendation

    1. Panasonic face steamer: Panasonic, a big brand in Japan and an old brand, is the first batch of brands to develop and produce face steamers. Panasonic's nano-level facial steamer only has a hot spray function, but it comes with an external aromatherapy function, that is, there is a slot for the aromatherapy tablet outside the steam outlet.

    2. Golden Rice Face Steamer: Golden Rice, a well-known domestic beauty generator brand. The quality, sales and popularity of Golden Rice's facial steamer are good. This is cost-effective, but also nano-level, only has a hot spray function, and can also realize the function of aromatherapy.

    3. SKG face steamer: It is also a domestic brand, and it is a well-known side loss point in cervical massager. This one only has a hot spray function, which is simple and not cost-effective. Choose a face steamer, don't be too entangled, the recommended golden rice from the land of Guozhou, and the recommended Panasonic from abroad.

  6. Anonymous users2024-02-01

    The correct use of the facial steamer is to clean the ** of the face first, and then turn on the facial steamer, and steam the face for 5 minutes to 8 minutes.

    It is best to use distilled water or purified water for the face steamer, which is sold in these supermarkets, and after buying it back and using it, the bottle cap should be tightened to prevent dust and impurities from entering. Clean the inside of the facial steamer regularly and add one or two drops of white vinegar to the facial steamer, but be careful not to clean it too often, and it is most appropriate to clean it once every 2 months or so.

    Notes:

    After adjusting the distance before using the facial steamer and adding distilled water, the facial steamer should be placed in a place with a suitable distance from the face, generally 20-30cm apart.

    The main thing is that the face should feel that the temperature is appropriate, and it is easy to burn the face if it is too close, if you feel a little hot, you should quickly move away from it, but **slow people should be far away at the beginning, so as not to be sleepy and know the menstrual burns**. After steaming your face, you can immediately wash your face with a cleansing cleanser to thoroughly wash off the dirt in the pores and on the surface of the **.

Related questions
5 answers2024-03-06

There are 4 steps to <> the correct use of caliper measurement, which are to observe the size of the workpiece to be measured, observe the workpiece to be measured, pull the caliper open, and record the caliper reading. >>>More

7 answers2024-03-06

As long as the fiber laser marking machine is controlled and operated by the computer, first open it with the special lock of the laser machine, press the power button, and then turn on the computer, start the laser, print the content, set the printing parameters, start the printing - there is a foot switch, or operate the printing option, or the photoelectric eye and so on to give the printing letter.

9 answers2024-03-06

Whether it's an instruction or a tutorial operation.

8 answers2024-03-06

Make two products of the same kind in exactly the same order. >>>More

11 answers2024-03-06

The sumifs function can quickly sum multi-conditional cells. >>>More