For a 10 meter high street lamp, what is the diameter of the bolt at the base according to the desig

According to the design code, the diameter of the base bolt of the street lamp should be determined according to the height and weight of the street lamp. For a 10-meter-high street lamp, generally speaking, the base bolt diameter should be selected within a certain range.

First of all, we need to consider the height of the street lights. The 10-meter-tall street light is relatively tall and therefore requires a more stable base to support it. Generally speaking, the base bolt diameter of a street lamp should be between 20 mm and 30 mm.

Secondly, we need to consider the weight of the street lights. The weight of a street lamp is mainly made up of light poles and light fixtures. Generally speaking, the weight of the pole of a 10-meter-high street lamp is between 100 kg and 200 kg, and the weight of the lamp is between 10 kg and 20 kg.

Therefore, the total weight of a street lamp is approximately between 110 kg and 220 kg.

The diameter of the base bolt should be able to withstand the weight of the street lamp and ensure the stability of the street lamp. As a rule of thumb, the diameter of the base bolt should be 1 10 to 1 8 of the total weight of the street lamp. Therefore, for a 10-meter-tall street lamp, the diameter of the base bolt should be between 14 mm and 28 mm.

Of course, this is only a rough estimate, and the specific base bolt diameter needs to be adjusted according to the actual situation. When designing and installing street lights, it is necessary to take into account the specific material, geographical environment, wind power and other factors of street lights to ensure the safety and stability of street lights.

In summary, for a 10-meter-high street lamp, the diameter of the base bolts should be between 14 mm and 28 mm according to the design specifications. This ensures the stability and safety of the street lights.

<> 10m solar street light foundation diagram. The bolt is M18.

Generally about 10-15 meters, the distance depends on the width of the road, if the main road of the city is generally 4 lights side by side, the distance is about 30 meters, the distance of the city secondary road 2 lights side by side, the distance is about 35-40 meters.

The sidewalks are generally single-lighted and the distance is 30-50 meters.

You can refer to the following:

Height, Upper Diameter, Lower Diameter, Arm Thickness, Conical Rod Taper Ratio, Flange Size, Hole Spacing, Foundation Frame Size.

6m 60 126 11 250*250*10 180 180*180*12

7m 60 137 11 300*300*12 210 210*210*16

8m 60 148 11 300*300*14 210 210*210*16

10m 70 180 11 340*340*16 180 250*250*18

12m 70 202 11 400*400*18 300 300*300*18

There are two main types of street lights, mains and solar. If it is solar, it generally needs 1* cubic meter.

If it is a mains powerhouse, it can be slightly smaller. Cubic metre.

There is no proportional relationship between the length of the corner bolt of the street lamp and the foundation of the street lamp, only the bolt anchorage length must meet the requirements of the code.

The anchorage length of the bolt is related to the diameter of the bolt and has nothing to do with the height of the pole. Tell me what you do.

16 cents Zhongshan Guzhen Xiangwei Street Lamp Factory specializes in the production of outdoor lamps and lanterns.

The fixing bolts of the base of the garden lamp are generally 14, and the fixing bolts of the base higher than 8 meters are generally 16, and the lamps and lanterns are installed on the concrete rod, and the angle iron cross arm is generally with 16 nuts, and the fixing bolts of the lamp hoop are generally 12.

As for the models inside the lamps, there are more.

Screw: Screw, also known as "screw" (screw), "screw" (screw). In fact, screws are a common name, and screws and screws are different from each other.

Screws are generally called wooden screws; It is the kind with a pointed tip at the front end, and the pitch is large, and it is generally used to fasten wooden parts and plastic parts. The screw rod is a machine screw (machine screw), which is the kind with a flat head at the front end, with a small and uniform pitch, and is generally used to fasten metal and machine parts.

From 8 to 16, there's all of them.

In general.

There are 8 special bolts for the steel rod lamp access door.

The fixing bolts of the base of the garden lamp are generally 14, and the fixing bolts of the base higher than 8 meters are generally 16, and the lamps and lanterns are installed on the concrete rod, and the angle iron cross arm is generally with 16 nuts, and the fixing bolts of the lamp hoop are generally 12.

As for the models inside the lamps, there are more.

If it is the screw of the connection point between the flange of the street lamp pole and the embedded part, it depends on the height to determine, M14, or larger, good luck.

If the street lamp has been customized, it should be combined with the flange size of the street lamp pole.