How high is the street lamp ground lantern line out of the ground, and how deep and wide is the bott

The height of the street lamp ground cage line out of the ground is determined according to the actual situation, generally speaking, the height of the street lamp ground cage line out of the ground is between meters and meters.

First of all, the street lamp ground cage wire refers to the cable line on the street light pole, which is used to supply power and connect street light fixtures. The following factors need to be considered for the height of the ground cage line:

1.Traffic safety: The height of the ground cage line above the ground needs to ensure the safety of vehicles and pedestrians.

If the ground cage line is too low, it is easy to be hit by tall vehicles or pedestrians, causing potential safety hazards. Therefore, the ground cage line is generally set at a height of more than a meter to ensure traffic safety.

2.Maintenance and construction: The height of the ground cage line out of the ground also needs to facilitate maintenance and construction.

If the ground cage line is too low, the maintenance personnel need to bend down or squat down for maintenance, which is not only inconvenient, but also easy to cause physical discomfort to the staff. Therefore, the ground cage line is generally set at a height of more than 3 meters to facilitate maintenance and construction.

3.Aesthetics and environmental coordination: The height of the ground cage line out of the ground also needs to consider aesthetics and harmony with the surrounding environment.

If the ground cage line is too high, it will appear bulky and uncoordinated, affecting the aesthetics of the surrounding environment. Therefore, the ground cage line is generally set at a height below the meter to maintain aesthetics and harmony with the surrounding environment.

To sum up, the height of the street lamp ground cage line out of the ground is generally between meters and meters, which not only considers traffic safety, but also facilitates maintenance and construction, and also maintains the beauty and coordination with the surrounding environment. Of course, the specific height also needs to be adjusted according to the actual situation and design requirements.

The common specifications of the 7-meter-high street lamp base (bottom plate) are: 290mm*290mm, a square iron plate with a diagonal of 280mm, and a conventional thickness of 16mm.

The corresponding ground cage (embedded parts) specification is: M24*4*1200

The specific digging depth and width should be implemented according to the specific size of the street lamp pole, and the excavation should be carried out according to the design drawings.

The specific digging depth and width should be determined according to the softness of the local soil and the specific size of the street lamp pole. The common specifications of the 7-meter-high street lamp base are: 300*300.

General depth, cross-section, base steel plate size.

Generally, the height is about one meter, the width is generally 22 cm to 25 cm, and the diameter of the screw is not less than 20mm

The embedded parts of the street lamp ground cage are generally how high the lamp pole is to make the ground cage, generally about 6 meters and about 30 street lamp ridges.

Generally, the cost of a 4-7 meter light pole base cage is about 30 yuan.

The ground wire is connected to the protective ground wire of the power supply, and it cannot be protected from lightning strikes and poor safety protection without being connected.

Generally, the street lamp is 500*500*800, remember to put the ground cage flat and the embedded pipe in before prefabrication; Solar street lamps need a battery pit of 1600*1050*1000, and a template is required to make a battery pit, and other references to the production of general street lights. Each manufacturer's products have their own foundation drawings before leaving the factory, please follow the drawings for installation.

Generally, the ground cage is about 60-75 cm deep, it is recommended that you do about 1 meter when you do the foundation, if it is a typhoon area or an area near the sea and river, as well as sandy land and soft foundation sections, it is recommended to deepen to meters.

This depends on whether you are a street lamp or a solar street lamp of the mains, and the depth of the two foundations is different.

If it is a city circuit light, remember that it is OK at 70cm, the top of the solar street lamp has solar panels, the top weight is large, and the wind resistance is large, so the foundation depth should be 80cm, if it is really in the coastal area or in the north windy area, it needs to be deeper.

According to the embedded parts of the street lamp (ground cage foundation).

The foundation is made according to the flange hole distance of the street lamp and the height of the street lamp, 3-5 meters, the height of the embedded parts of the street lamp is about 40cm, and the height of 6-8 meters is about 50-70 cm. The higher the street lamp, the thicker the steel element of the embedded parts, and the higher the height.

Generally, it is buried about 30cm underground, but if it is under the road surface, it is necessary to go deeper and choose a better PVC buried pipe. The foundation of the ground cage is made according to the buried ground, which is generally excavated from the ground.