Why does the iphone6 use rice after falling into the water?

Suck it up, it's a quick and easy way.

1. Absorb the water in the interface.

Interfaces such as the headphone jack and charging port are also the most susceptible places for mobile phones to be affected by water. It is recommended to use a fine cotton swab to carefully absorb the moisture at the interface. In addition, if you have a vacuum cleaner at home, it is an ideal tool to suck at each port for more than 5 minutes to remove as much moisture as possible.

2. Remove moisture.

Rice has very good water absorption. Putting your phone in dry rice for at least 24 hours can completely remove the moisture from your phone. Of course, in addition to rice, other desiccants can also be used, but rice will be easier to clean, so it is recommended that you use rice, and the materials are easy to find.

3. Cut off the power supply.

The reason why the phone is so easy to break down after falling into the water that it cannot be used is because the water enters the phone and causes the internal components of the phone to short circuit, and if it is used with recharge, it may cause the internal components to burn out or the battery**.

Therefore, once the mobile phone gets water, you must quickly wipe the surface moisture with a paper towel, and then disconnect the power supply. If the battery is removable, remove it as soon as possible.

4. Check whether it can be used.

If there is no water mist on the phone screen, it means that the water on the phone has been removed. At this time, put the battery back into the phone, restart it and see, under normal circumstances, after the above four steps, your phone can continue to use.

1. You should take the phone out as soon as possible, shut down quickly to prevent the motherboard from being short-circuited and burned, if you press and hold the power button and the home button can not be turned off, please press and hold the power button and the home button until the system shuts down.

Note: If the screen turns black and you can't press the power button to turn it on, once the device is working, it is easy to have a short circuit, causing damage to the motherboard.

2. Remove the SIM card and wipe it dry to avoid losing contact information.

3. Remove the mobile phone case and other objects, and use a paper towel or cloth to remove the water outside the fuselage and in the crevices.

4. Wrap the fuselage with absorbent towels or paper towels for a few minutes, as much as possible. Suck out the water.

Note: Do not use the method of throwing. Shaking will cause the water that has already entered the fuselage to spread, and it will come into contact with elements that cannot touch the water, causing even worse results.

5. If possible, try using a cotton swab to absorb excess water from the earphones and small slits.

6. When you have removed all the visible water, put the phone into a bag full of rice, drain the air, and seal it. Then put the whole set in a slightly heated place, such as a computer heat.

Note: Do not put it in a high-heat environment, nor do you use a hot air dryer to blow it, doing so will damage the internal components.

7. Wait until there is no fog, it is best to put it in the bag for at least 36 hours, take it out, and naturally return to room temperature. Try it on and it can generally be used.

What should I do if my phone falls into the water?

1. Scoop up the mobile phone from the water in the shortest possible time, because the mobile phone generally has a certain waterproof performance, and quickly scooping it up can minimize the probability of damage to the mobile phone.

2. Shut down quickly to avoid short circuit damage to the motherboard caused by water ingress on the mobile phone motherboard, and pay special attention not to turn on the motherboard at this time.

3. Remove the phone case and wipe the phone case dry to prevent the water in the phone case from seeping into the phone.

4. Carefully wipe the water on the surface of the mobile phone with a dry paper towel, and try to absorb the water in the mobile phone jack and crevices.

5. Take out the SIM card of the mobile phone, wipe it dry and put it in a dry and ventilated place.

6. Use a blow dryer to dry the remaining moisture of the mobile phone or put the mobile phone in the sun for a period of time, wait for the mobile phone to dry slightly as a whole, for the sake of insurance, generally wait for a day before turning on, and it is best to use the sun to dry under conditions, which can reduce the damage to the mobile phone.

Here's how.

1. Quickly scoop up your phone.

In this case, don't panic, you must quickly get the iphone6 out of the water, many netizens have done iphone waterproof tests before, and the test results show that there is no problem with iphone6 being fished out within ten seconds after falling into the water.

2. Shut down. After scooping it up, it should be shut down quicklyOperation method:

If you can't turn off by pressing and holding the [Power Button], you can press and hold the [Home Button] and [Power Button] at the same time to force the shutdown.

1.Do not try to turn on the device immediately if there is water ingress. Because the iPhone has a built-in battery that cannot be removed, the motherboard will be short-circuited if it gets into the water, and if it is turned on, the motherboard will be burned, causing irreparable consequences.

2.If there is water, do not try to charge it immediately, because the iphone has a built-in battery that cannot be removed, and the motherboard will be short-circuited if it is flooded, and if it is charged, the motherboard will be burned, causing irreparable consequences.

3.You can first use toilet paper to dry the water outside the mobile phone, and then place the mobile phone screen horizontally to prevent water from flowing to the motherboard, and then use a blow dryer to dry the water, and turn on the temperature at medium or small temperatures.

4.Wipe down the circuit board with anhydrous alcohol and try to turn it on. Because alcohol volatilizes quickly, the moisture on the circuit board can be volatilized clean.

If the problem does not solve your problem, it is recommended that you bring your phone to an Apple customer service center for repair.

The quality of Apple's mobile phone is still very good, and there is actually no problem after drying, and you can continue to use it. Don't play when it's wet and avoid short circuits. If you really can't get it to the after-sales service, it's fine.

Of course, it is to immediately take the mobile phone out of the water, do not turn it on, let it dry in a ventilated place, pay attention to the inside of the machine also needs to be completely dry, just dry it for a few more days, and generally restart it can be used.

Generally, the battery will be deducted, the phone and battery will be dried, and then try again after 1-2 days.

This kind of depends on whether you go to a regular Apple after-sales center, in a regular after-sales center or a repair center, it is immediately advisable to repair the mobile phone, it is recommended that you go to a regular after-sales store in Beijing.

Cuiwei Building Office Building, No. 33 Fuxing Road, Haidian District, Beijing.

No. 39 East Third Ring Middle Road, Chaoyang District, Beijing, Block B, Jianwai SOHO East District, Block T2, Xihuan Plaza, Xicheng District, Beijing.

Block D, Wanfang Building, Wanda Plaza, Tongzhou District, Beijing.

Chongwenmen New World Office Building, Dongcheng District, Beijing.

Or a repair shop can handle it for you.

Let it dry, don't turn it on, otherwise it will be short-circuited, wait for two or three days.

Regular after-sales shops or repair shops can help you deal with it, it is recommended that you do not go to informal stores, because they will charge fees indiscriminately, and they will not repair in front of you, it is very likely to steal the parts of your mobile phone, but this kind of problem will not exist in the regular after-sales service.

There is no way around this.

Can only be dried. Or repairs.

1. Do not move or shake the phone frequently after entering the water, so as to avoid the spread of moisture inside the phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on normally after simple processing (Apple customer service center 010 5363 0616), but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. It is recommended to bring your mobile phone to the regular Apple customer service center for inspection and maintenance.

As we all know, Apple Six phones are not waterproof. If you fall into the water, the total is handled in much the same way as other mobile phones.

Wipe dry with a paper towel. Whole.

The mobile phone and the water in the eight holes of the bar hole are sucked dry, and then shaken vigorously. In the meantime, be sure to turn off the machine and leave him aside, probably. Five or six.

It should be back to normal in a few hours.

You can go to Beijing Apple Repair Center, Wangjing SOHO T1C, Chaoyang District, Haidian Culture and Art Building, No. 28A, Zhongguancun Street, Haidian District, Cuiwei Building, No. 33, Fuxing Road, Haidian District, Jianwai SOHO East District, No. 39, East Third Ring Middle Road, Chaoyang District, Jianwai SOHO East District Block B, Xicheng District Xihuan Plaza T2, Tongzhou District Wanda Plaza Wanfang Building, Block D, Beijing Dongcheng District Chongwenmen New World Office Building, customer service can help you find the nearest regular Apple after-sales maintenance center. It is recommended to back up the important data on the mobile phone first, and then go to the relevant maintenance outlets to let the engineer detect the fault, and then determine the repair plan and maintenance**. The official website makes an appointment to select the time you want to go, it may be fully booked, and you can only make an appointment 3 days in advance.

If there is a vacancy, you will be asked to choose the time to go to the service.

To make an appointment for repair online, you need to make an appointment with the serial number of your iPhone:

Click "Settings", open "General", select "About this machine" under the interface to see the serial number, you can go to Apple's official website to make an appointment for maintenance.

(1) The most common problem of an Apple mobile phone with water is the blurred screen, and the most serious situation is that the motherboard is burned, which is a great disaster for a mobile phone, and it is not easy to repair.

2) It is important to mention here that the mobile phone must be turned off immediately after entering the water, and it must be turned off immediately!

3) The most formal way to deal with the iPhone after it gets into the water is to clean it up by removing the motherboard and battery, etc.!

4) iPhone disassemblyIn fact, many people will disassemble according to the strategies on the Internet, but one thing will not be that it will not be cleaned, just wipe it with a cloth, in fact, the parts in the motherboard still have water!

5) You can disassemble it and rinse it with a special solution, or put it in a ventilated place to dry!

6) Finally, there is a way to put the mobile phone and rice in a closed bag, so that the rice can absorb water, this time is relatively long, but the effect is still good!

Compiled some of our daily handling methods after the iPhone fell into the water, I hope these methods can minimize the loss of your little 5s.

1.The first thing we do when the mobile phone falls into the water is to turn off the mobile phone, of course, many mobile phones have been automatically turned off when they fall into the water, so it is estimated that there is a problem with the line or battery and it will be turned off, at this time, we should not try to turn it on, because the mobile phone is flooded, and the things on the motherboard are electronic, so the boot will make you lose more.

2.Some friends will try to disassemble the phone, but for us, there is no professional tool, you can't open the phone, of course, if you can disassemble it, that's better, open it, we try to dry the hair dryer inside (be careful not to keep shaking the phone, we open it, if you find a lot of water, you can try to use soft paper to absorb the water inside).

3.If you don't know how to do it, we will send it to repair the electricity as soon as possible, because other equipment may be damaged overnight, so this must be noted.

4.If you're unlucky enough to fall into the water and it's all broken, we can go to your Apple after-sales office and we'll pay for a replacement.

Precautions. If your phone falls into the water, we don't send it for repair overnight, and don't damage your phone, because the more the water is damaged, the more it will flow to other places.

The iPhone 5s is coated with waterproof materials on the outside of the hardware and facilities, so under normal circumstances, a short period of water will not have a big impact. But if you have time in the future, let's take a closer look.

Summary. Hello Kiss, happy to answer your questions. If the iPhone falls into the water, it needs to be turned off immediately <> power

What to do if the iPhone falls into the water.

Hello Kiss, happy to answer your questions. If the iPhone falls into the water, it needs to be turned off immediately <> power

After the phone is fished out of the water, it is immediately turned off and the power is off. Regardless of whether the screen turns black or not, quickly shut down to prevent the motherboard from short-circuiting and burning out. If pressing and holding the power button does not turn off, you need to press and hold the power button and the home button until the system shuts down. <>

If it is mild water ingress, you can wrap the body in a paper towel and put a small bag of desiccant (often attached to food) at the same time as the bag, or you can put it in a bag full of rice, drain the air as much as possible, and seal it. Then put the whole set in a slightly heated place, such as a computer heat.

Remove the SIM card and dry it as soon as possible after the SIM card is removed. Take off the protective case of the phone, pay attention to the earphones and power interface, and use a small cotton swab or paper towel strip to plug in and absorb dry, and clean the water outside the fuselage and in the crevices.

Do not shake it, shaking will cause the water in the phone to spread, so that the components that cannot be touched by water will come into contact with the water, causing worse results. Wrap the body with absorbent items and absorb moisture.

Do not place in a hot environment, nor blow with a hot air dryer, as doing so will damage the internal components. Wait until there is no fog, it is best to leave it for another half a day, take it out, and naturally return to room temperature.

The sound quality deteriorates. Do not use the hot air of the hair dryer to blow or expose to the sun, which will cause the circuit board to deform, and you cannot press the power button to turn on, and it is easy to short circuit when the machine is turned on, causing damage to the motherboard. <>

Dear, it's because the microphone got into the water. This is the easiest place to get water.

Is it okay for me to use a hair dryer to cool the air?

The cold air simply blows the Apple mobile phone, pay attention to blowing in all directions, and blow the air in the earphone jack, speaker and other parts. Pay attention to keep a certain distance, remember not to blow a little too long in a concentrated way, and keep a certain distance to blow evenly.

Dear, you can, but don't get too close.

For further processing, be sure to wipe and blot the surface thoroughly. Use cloth, toilet paper, sponge, etc. Wipe dry in all directions, especially pay attention to the power button, volume button, mute button, speaker, microphone, headphone port and other parts.

Try to absorb and wipe off any visible moisture as much as possible, and use cotton swabs or similar things for the earphone jack and other parts.

The iPhone is a subsidiary of Apple IncA series of mobile phones equipped with the iOS operating system that went on sale on January 9, 2007.

As of March 2022, Apple Inc33 mobile phone products have been released, and the iPhone is Apple IncIt went on sale on January 9, 2007.

Dear, if you can't see the effect by yourself, it is recommended to send it to the mobile phone repair point for disassembly and cleaning, ** not expensive dozens of yuan to get it. Thank you for the consultation, give a thumbs up, thank you. <>

The phone is good now. Thank you. Good.