How to tell if the Apple screen is the original screen

Judge iPhone X

Whether the original screen is mainly through the following points: whether the original color function is normal. iPhone X The screen will be warmer after turning on the original color, and the color temperature will be colder after turning it off, but it is said that the original color function has been cracked in March this year, and it is difficult for the naked eye to distinguish the difference in color temperature between the original screen and the domestic screen.

Whether the 3D Touch function is normal. When you press the desktop icon, the screen will have a noticeable sense of feedback, as if the screen has been pressed in. Look carefully at the bangs in the state of the screen, the bangs are almost integrated with the screen when the original screen is closed, and it is difficult to distinguish them, while the domestic screen bangs and the screen are more obvious.

Turn the screen to the lowest brightness,Find another mobile phone to turn on the camera and aim at the screen obliquely,If there is an obvious screen flash on the screen,Then it may be the original screen,If you can't see the screen flash, then it's basically a domestic screen。

The early domestic screen is LCD material, and the bezel and chin are obviously thicker than the original screen, so if there is a comparison, you can see it at a glance, but the latest domestic screen has been upgraded to OLED material, so even if some of the above conditions are met, it is not necessarily the original screen. Now the technology of copycat domestic screens is constantly updated,Even through the above several inspection methods,It may not be possible to distinguish whether it is the original screen or not。 But one thing is for sure, the original screen is much more expensive than the domestic screen, the screen cost of the iPhone X is more than 1500 yuan, and the cost of replacing an original screen is at least 1800, and it will be done with three or five hundred, so it must be a domestic screen.

Some netizens asked that since the display effect of the domestic screen is similar to the original screen and cheaper, why do you have to worry about whether it is a domestic screen or the original screen? This is because the domestic screen is not produced by regular manufacturers,What they pursue is to make the screen display effect look similar to the original screen to the naked eye,As for the service life of the screen、Reliability and other important performance are not concerned,That is to say, the original screen of the iPhone X screen can be used for a long time,And the domestic screen may be broken in three or five months。

What's more important is that some profiteers sell parallel goods.

iPhone X, the original screen will be removed and replaced with a domestic screen, and then sold to consumers according to the original screen, ordinary people can't see it at all, and profiteers can get huge profits from it. There are also some netizens iPhone X whose outer screen is broken, and they are reluctant to spend money to go to the official after-sales service, find some third-party stores to repair it, and secretly replace the original inner screen of your iPhone X that is not damaged in the repair process, and then replace it with a domestic screen that cannot be distinguished, which is equivalent to not only charging you for the repair fee.

Therefore, it is recommended that you choose the Bank of China after buying an iPhone.

**, at least the quality is guaranteed, and when the iPhone X is damaged, try to pass the official after-sales service, if you must find a third-party repair shop, then you must keep an eye on your mobile phone during the repair process, do not let the mobile phone out of your sight, and avoid replacing the screen or other original parts during the repair process.

Many users who have bought second-hand Apple mobile phones in netizens, and even those who have bought them offline in the official *** do not know whether the mobile phone has been repaired and replaced with a non-original screen after repair. Let's tell you how to tell if the Apple mobile phone screen is the original screen.

Method steps.

1 12 Step by Step Reading.

The original screen refers to the screen installed at the factory with the same resolution as the manufacturer, and the screen has not been modified.

There are two types of original screens: brand new original and disassembled screens.

The disassembly screen is divided into large flowers, medium flowers and small flowers according to the degree of scratching.

The rear pressure screen refers to the outer screen of the screen due to artificially caused the outer screen to be broken and scratched, and then the outer screen is replaced, the inner screen is original, and the outer screen is replaced. The outer screen is divided into original factory and assembled outer screen.

The screen of the assembled screen is assembled by domestic accessories, and the assembled screen is generally yellow, green, and blue.

There is no sticker on the rear pressure screen, *** location is higher than other places, *** is gray.

The color of the assembled screen is wrong, it is not prominent, and there is no sticker.

Arrangement line discrimination (4 5 6 generations general): the original screen, the rear pressure screen, the cable is smooth, there is an Apple logo on it, the workmanship is fine, and the black does not shine.

Assembling the screen, the color of the cable is black and shiny, there is a feeling of paint, there is no Apple logo on the screen line, and the workmanship is poor.

Camera hole identification: The original screen and the rear pressure screen can be seen through the inside of the screen There are blue or yellow circles on the front camera, but there is no assembly screen.

Generally speaking, as long as the Apple mobile phone is purchased through regular channels, it will generally be original.

How can you tell if the Apple mobile phone in your hand is the original screen?

Apple mobile phones can judge whether the phone screen has been changed by observing whether the phone has True Tone display.

See how:

1. First unlock the phone to enter the homepage of the phone.

2. Then slide your finger down the screen to bring up the drop-down menu.

3. Then press and hold the brightness button in the menu.

4、Then observe whether there is a true color option in the pop-up box,Yes is original,No is non-original。

Click Settings on the first interface of iPhone, as shown in the figure below.

2.Click on the display and brightness of the setting interface, as shown in the figure below.

3.Enter the display and brightness, there is a true tone display below the brightness adjustment interface, as shown in the following figure4If True Tone can be turned on and off, then the screen is original.

6.Finally, by observing the packaging edge of the screen, the packaging edge of the original screen is seamless, and the encapsulation glue can be analyzed and seen by the third party.

How to quickly identify whether the Apple phone screen is the original screen.

Open iPhone Control Center, press and hold the brightness adjustment, True Tone will appear under normal circumstances; Or go to iPhone Settings > Display & Brightness to see if True Tone is available.

Four tips to detect if your iPhone screen is original.

If you don't have this feature in your iPhone, it's likely that the screen has been replaced.

Check the auto-brightness adjustment function.

If your iPhone has a different screen, automatic brightness may not work. In iOS 11 and later, you can turn on the auto-brightness adjustment feature in Settings - General - Accessibility - Display Adjustments, and observe whether this function is working properly.

Four tips to detect if your iPhone screen is original.

Observe the appearance. Observe whether the gaps of the mobile phone are tight, whether there are glue marks, whether there are obvious light leakage marks, if there are, it means that the screen has been replaced.

You can also drop a few drops of water on the screen without a film (be careful not to drop too much), if it rolls in water droplets and does not spread out, then it may be the original screen. If the water droplets spread out and seem to drip on the ground, then the screen has been replaced.

Four tips to detect if your iPhone screen is original.

Detect with AIS Assistant.

Connect your iPhone to the computer via a data cable, open the PC side of AISI Assistant, and click "View Inspection Report" in the "Device Information" interface, you can see the details of the device.

Four tips to detect if your iPhone screen is original.

If the front camera's factory and readout values are inconsistent, the phone may have had a different screen. This is because of the characteristics of Apple's original accessories, LCD screen, touch screen, front camera, handset, sensor and other accessories are called display accessories assembly. When replacing the LCD screen, most maintenance personnel will not disassemble the camera on the old parts assembly to the new parts assembly, because the disassembly parts assembly is easy to damage, and they will choose to replace the parts assembly directly.

Take iPhone 11 as an example. 1.You can use the mobile phone flash to illuminate the screen in the off-screen state, generally if you can see a thin grid, then the screen is not original, in addition, in the shutdown state, the non-original screen will appear gray black, and the original screen will appear black.

2.The original screen is relatively neat, the non-original screen cover plate is thinner, the screen is thicker, and it is not a curved surface, it will scratch your hands after installation, and it feels bad, in addition, the combination with the back shell is not close enough, and some even have gaps.

This kind of thing shouldn't change. I don't seem to like it myself.

How to quickly identify whether the Apple phone screen is the original screen.

How to see if the original screen of the Apple mobile phone is as follows:

Look at the appearance of the machine in general, and the appearance is re-verified by the internal screws. When encountering screen renovation, there are mainly the following characteristics, all of which are required to be carried out without film.

1.The screen is not formed, or there is no three-dimensional effect. This is the most basic,Apple factory has a comb layer,The film is 100% in,If you don't stick the film for a long time, it will only be a little problematic where the fingers are worn,But it won't fail with a whole screen dripping。

2.The screen glass is lower than the black sealing ring next to it, if you remove the film and the mobile phone screen touches the sealing ring next to it, congratulations on winning the lottery. It's really flat. Not to mention that it is for a better film, people and experts have not considered the problem of film when it was designed.

3.The front camera and the glass are out of alignment, and it is impossible for the original screen to have any misalignment with the camera, and you can't see anything next to the camera.

4.Front and side view of the front camera. Whether you look at the front camera or the camera from the side, you can easily see the inside of the front camera. However, the fake front looks blurry, and the side looks directly reflective or white, I don't know if it's a glass transmittance problem.

Other tips about iPhone:

What you should know is that the call history of iPhone will only store 100 messages, and more than 100 will be gradually deleted from the beginning. If you have a lot of calls, call logs are more important. It is recommended to use third-party software to dial** or make a backup record.

1. You can see that the water droplets on the original screen are very round and full, a little close to the water droplets on the lotus leaf, and they will maintain a better shape as the screen tilts and scrolls; On the screen of the cottage, the water droplets are soft and collapsed, and there is a feeling of "thorns" around it, which is lifeless.

Why?

It turns out that there is a special coating on the original screen, that is, a layer of superhydrophobic surface is made of hydrophobic micron particles or nanoparticles on the screen, which increases the tension on the surface of the screen, making it difficult for oil to attach. Limited to cost and process, the cottage screen does not add more of this layer of anti-fouling film, so it cannot form full water droplets like the original screen.

There is also a simple way to put the mobile phone screen on the ground and throw it to the ground, and if it breaks, it will not

You can look at the following aspects.

New original screen: It exists in LCD factories for Apple OEM, assembly plants, Apple direct stores, Apple authorized stores, and new iPhones. The advantage is that the appearance is brand new and the functionality is good, and replacing the screen at an authorized after-sales store will not affect the warranty (if there is a warranty).

The disadvantage is that consumers have no other way to get it except to spend money on it after sale.

Original screen: **In LCD factories and assembly factories for Apple OEM, the screen generally has a newer appearance, and individual screens may have small flaws that consumers cannot distinguish. After selecting a screen with a newer appearance, it will generally be regarded as a "new original screen" by repair shops and **shops**.

The advantage is that it is easier to obtain and cheaper than a brand new screen, and the disadvantage is that it is necessary to choose to avoid some flawed screens.

Dismantling the original screen: The screen removed from the second-hand mobile phone has different colors, and there are very new ones but the number is small, and the majority of them are ordinary to poor quality. There are people in the market who specialize in second-hand mobile phones, and these screens are here, both at home and abroad.

Because it has been used for a few months or even a year or two, some screens will have problems, such as screen aging, yellowing, touch failure, screen jumping, heating, bracket detachment, etc., which require professional skills to choose to avoid these problems. The advantage is that it is easier to obtain than the original screen, and it will be a little cheaper.

Domestic screen: also called group screen, assembly screen, imitation screen, fake screen. Produced by several large domestic screen manufacturers, pure fake screens, early fake screens are very fake, thick covers, display slag, low viewing angles, not smooth touch, sliding ** is easy to get rid of, after several generations of improvement, the gap between the original screen and the original screen is not too big, at least it is difficult for ordinary consumers to distinguish, and because of the new and low appearance, it is often used by the counter as a "new original screen" ** to obtain huge profits.

Pros: No pros. Cons:

The whole body is full of shortcomings.

Rear pressure screen: the largest screen on the market, the screen that consumers can spend money can change in addition to the domestic screen is the rear pressure screen. In the usual sense, the rear pressure screen refers to the screen with the cover plate replaced, but JS sells all the screens that have undergone special treatment as the rear pressure screen, which is more pitiful.

For example, changing the cable screen is an overhaul for the screen).

Defective screen: Generally, the market counter classifies the disassembly screen and rear pressure screen as B-level and C-level for cheap processing. Questions generally include:

There are crush injuries, abnormal size spots, leakage, yellowing of aging, abnormal streaks, dust, bright spots and bad spots, bubbles, the backlight is not very good, and the touch occasionally fails.