How to quickly thaw the water pipe when it is frozen, and how to thaw it quickly when the water pipe

The water pipe is frozen, and if you want to thaw it quickly, you can only use hot water to thaw it quickly.

The method of quick thawing of the sewer frozen is as follows:1. Pour hot water on the water pipe repeatedly, and the ice in the water pipe may melt after pouring it several times.

2. If there is a plug near the water pipe, you can directly use a hair dryer to blow the water pipe, and pay attention to the plug not to enter the water, otherwise it will be short-circuited and electrocuted.

3. Cover the pipe with a wet towel, and then turn on the water pipe switch, and the water pipe may come out normally after a while.

4. Pour hot salt water into the water pipe, the salt water has the effect of dilution, and the ice may melt after pouring it a few more times.

5. Wrap the insulation foam on the water pipe in advance, as long as the water pipe effectively wraps around the insulation foam, it is not easy to freeze in the later stage.

The water pipe is frozen, and if the water pipe is made of steel, you can use a musket to see the steel pipe. If the material is that composite pipe, you can pour hot water on it.

To warm it, just soak it in warm water.

This can be solved by pouring hot water.

01 If the place where you are not particularly cold and the temperature can reach above zero during the day, don't worry too much, the water pipe can thaw itself during the day. If the temperature in your place has been below zero during the day, it is recommended that you first pour the water pipe with warm water several times, and then scald it with boiling water.

02 In addition to using hot water, you can also use a hair dryer to heat the water pipe, blowing the faucet first, then the water pipe, so that the ice inside the water pipe can melt.

03 If the water pipe is thick and you want to melt the ice, the steps are a bit cumbersome, you need to unload the pipe interface first, and then add warm salt water to the pipe, and the ice in the pipe will melt quickly.

04 If you are worried about the water pipe freezing again after the ice in the water pipe has melted, you can wrap the root of the faucet and the bottom of the water pipe with foam, thick quilt, etc.

05 If you are in a place where you have a limited water supply, be sure to clean the water in the water pipes so that the water pipes will not freeze.

06 If the water pipes in the room are frozen, turn on the heating and air conditioning in the room, or place the stove next to the water pipes, and the ice in the water pipes will melt.

Use a hot towel to apply a water pipe: Use a hot towel to apply to the water pipe, the towel does not have to be too hot, it is okay to be warm, use the heat of the towel to melt the ice inside the water pipe.

The water supply will soon be restored.

When there is no power supply around, the effect of a hot towel is very limited if you are outdoors. You can use fire roasting to melt the ice.

Do not get too close to the water pipe when grilling it to prevent it from bursting. Find a water company to solve the problem.

If the frozen water pipes are in the walls or underground, the water supply can be restored by finding a solution with the local water company.

Precautions: The public can carry out simple anti-freezing protection for water facilities. For example, cotton and linen fabrics and plastic foam can be used to wrap water pipes, water meters, and faucets.

At night, the windows of the kitchen and toilet should be closed, and the faucet should be slightly unscrewed to make the water in the water pipe flow without freezing.

If the water pipe is frozen, use a hair dryer to blow it, or wrap the water pipe in a towel and pour it slowly with warm water. Do not bake or blanch with boiling water, as this will burst pipes and water meters.