What should I do if the water pipes at home freeze? The family lives in a bungalow

For the frozen water pipe, do not twist it vigorously, do not use pliers and other tools to start hard, and do not use fire or boiling water to pour it directly, otherwise it is easy to damage the faucet and cause the pipe or water meter to burst.

The public can carry out simple anti-freezing protection for water facilities. For example, cotton and linen fabrics and plastic foam can be used to wrap water pipes, water meters, and faucets. At night, the windows of the kitchen and toilet should be closed, and the faucet can be slightly unscrewed to make the water flow in the water pipe without freezing.

If the water pipe is frozen, use a hair dryer to blow it, or wrap the water pipe in a towel and pour it slowly with warm water. Do not bake or blanch with boiling water, as this will burst pipes and water meters.

Do the math how much it will cost you to renovate your home

Do the math how much it will cost you to renovate your home

Outdoor water pipes can easily freeze in winter, especially in the north, so it's best to know how to deal with them. If you find that the water pipe is frozen, first unscrew the faucet, and then use an iron rod to burn red in the fire, and poke him into the pipe, and it will be opened in a while. Generally, if this is the case, it is best to do so when the water is not released or when the sluice gate is closed, otherwise it will suddenly be able to pass through the water and splash out.

Enter the area and get the decoration for free**].

Enter the area and get the decoration for free**].

How to thaw when the water pipe is frozen.

If the water pipe has been frozen, it is advisable to unscrew the faucet first, use a hair dryer to blow it by yourself, or wrap the faucet with a hot towel, and then pour it slowly with warm water to thaw the water pipe.

If there is still no water flowing out of the water meter, it means that the water meter is also frozen, at this time, wrap a hot towel on the water meter and pour it with warm water (not higher than 30) to thaw the water meter. Do not bake with fire or blanch with boiling water to avoid bursting the water pipe.

Your pipe needs to be insulated, and it will be no problem to do a good job of insulation.

Burn a fire and bake that tube for half an hour, it should work, and then wrap it in insulation!

Apply a towel to the tube, and then slowly pour hot water on it to thaw, pay attention not to pour boiling water directly, so as not to crack the tube, preferably hot water with a higher temperature, for a longer time, which should help to thaw. I hope it can help you. Remind you that when the weather is cold, you can turn on the faucet a little before going to bed at night to keep the tap water in a dripping state, which can effectively prevent freezing, and there will not be much water wasted overnight, or you can use utensils to catch the running water, so that there is no waste at all.

With a rag (dry), I hold it and I may freeze it and put hot water on the road and melt it with hot water!

My friend's house also froze last year, so that's it!! It's so easy to use!! When the water is cold, dry the rag and dry like this!! Be sure to turn on the faucet!!

Hope it works for you!! I adopt it easily!

The so-called hot compress method is to use a towel, wrap the frozen part, including the faucet, and then pour hot water on the towel, do not need to be too urgent, just pour it slowly, let the towel maintain the temperature, generally speaking, the iron pipe will be good for a while. The PPR pipe conducts heat slowly, and if it takes a little longer, the water pipe will thaw. If the freeze is too severe, you can try pouring it a few more times.

This method is simple and practical, and it is very easy to operate.

When the water pipe at home froze, we first wrapped the water pipe in a towel, and then poured a pot of boiling hot water on the water pipe until the water pipe thawed and used normally. During the period, pay attention not to pour hot water directly on the water pipe, as direct contact with hot and cold can easily lead to the rupture of the water pipe.

Buy a heating belt, wrap the water pipe directly, use the heating belt to give him the water pipe to bloom, if it is too late, you can directly bake him with fire.

Then use the heating belt bought online to wrap the water pipe directly, and when you need to use it, heat the heating belt directly, and the water pipe will not move.

If the water pipe at home is frozen, the easiest part of the water pipe to freeze is the mouth of the faucet, you can boil some boiling water, and then pour it on the mouth of the faucet, or you can use a hair dryer to turn on the warm air and blow the frozen part open.

If the tap water at home freezes, you can go to the neighbor's house to get some water first. We can start by slowly increasing the temperature in our home. When the temperature in the home slowly rises, the tap water will thaw.

If it is an open pipe, we can cover the pipe with a hot towel, or directly flush the pipe with boiling water, and wait for it to thaw.

The most effective way to solve the frozen water pipe is to use hot water for continuous flushing, but it is necessary to spray the water pipe slowly and evenly, so that the water pipe can be thawed, so as to ensure normal use.

If the water pipe at home is frozen, you can use boiling water or lukewarm water to melt it, and then wrap the water pipe with a sponge to prevent it from being frozen next time.

If the water pipe at home is frozen, you can wrap the outside of the water pipe with a towel, and then pour boiling water on the towel, and pour it several times, and the ice inside the water pipe will melt

If the water pipe at home is frozen, you need to add hot water to the water pipe to thaw it. If necessary, you can also cut a towel outside the water pipe and pour boiling water to thaw it.

You can try it with the hot compress method, the so-called hot compress method, is to use a towel, the frozen part is wrapped, including the faucet, and then pour hot water on the towel, don't be too anxious, just pour it slowly, let the towel keep the temperature, generally speaking, the iron pipe will be good for a while. The PPR pipe conducts heat slowly, and if it takes a little longer, the water pipe will thaw.

If the water pipe is frozen, you can take the method of hot compress, prepare a towel, and wrap the frozen part, including the faucet. Then pour it slowly with hot water, not too fast, so that the towel can be kept at a certain temperature and thaw after a while. If it is a PPR pipe, the time may be longer, and if it freezes too much, it can be repeated many times.

The water pipe is frozen, you can use hot water to relieve it a little, use a towel, then put it in hot water, and then go properly. Put it on the top of the tube to apply, and by the way, use a hair dryer to blow it in the form of warm air, so that the thawing effect will be faster.

In winter, the climate is cold, the water pipe at home is often easy to freeze, you can use a towel, hot water thaw first wrap the water pipe with a towel for a long time, and then boil a pot of hot water, pour it on the towel for a period of time, the ice in the water at home will dissolve, and the water pipe will be through.

Generally speaking, the main pipe is the responsibility of the water company, and the part of the main pipe to the interior is the responsibility of the property company.

If the water pipe at home is frozen, you can pour warm or hot water on the frozen water pipe to heat it evenly, and it can be relieved slowly. In addition, you can use a hair dryer to heat the water pipe, pay attention to the uniform heating, do not hammer in one place, if the temperature in one place is too high, it is easy to cause the water pipe to rupture.

If the water pipe at home is frozen, the best way is to scald it with hot water, see which section is frozen, and then pour it on with hot water, and he will be able to pass it after a while, or change the water pipe.

When the weather is not so cold, you can use a pot of hot water to pour the frozen water pipe, pour more hot water for a while, the water pipe will slowly thaw, and after thawing, you can wrap the water pipe with some warm cloth to prevent the water pipe from freezing again.

If the household water pipe has been frozen, you can unscrew the faucet first, use an electric hair dryer to blow it yourself, or wrap the faucet in a hot towel, and then slowly pour it with warm water so that the water pipe can be thawed.

If the water pipe is frozen, apply a warm compress, prepare a towel, wrap the frozen part, including the faucet, and wrap it in a towel. Then pour in the hot water slowly, not too quickly, keep the towel at a certain temperature, and thaw it after a while. If the tube.

If the water pipe in the room is frozen, you can wrap the water pipe in a towel first, and then pour hot water on the towel.

When the water pipe is frozen, we wrap the water pipe in a towel, and then boil a pot of hot water on it for watering, it can be thawed for normal use, if the freezing is more serious, you can water it for a while, remember not to pour hot water directly on the water pipe, direct contact between hot and cold can easily lead to the rupture of the water pipe.

If you are in a hurry, you can boil some boiling water and pour it on the water pipe to let it thaw quickly, and you can turn on the faucet a little bit at night to let it flow naturally, so that it will not freeze.

The water pipe at home is frozen, if it is outside the wall, you can use a heater to blow it, but the effect is not too good, if it is within the wall, then there is no way, you can wait until the weather warms up and it will naturally thaw.

Close the windows in the room where the pipes are located to prevent cold air from entering the room. Then adjust the hot air of the hair dryer to the maximum value, and blow directly on the water pipe until the pipe can produce water.

2. You can also try to use hot water to water the pipe directly, you need to wet the whole pipe with hot water from beginning to end, and use hot steam and temperature to melt the frozen liquid in the pipe.

3. To solve the problem of frozen water pipes, the fundamental way is to increase the indoor temperature. In addition to closing doors and windows on a daily basis, you can also use electric heating to raise the indoor temperature. When the room temperature is raised, the water will be able to flow out of the pipes naturally.

4. You can also try to wrap the water pipe with a heated electric mattress until water flows out of the water pipe. If the above methods have no effect, you can find a special pipeline maintenance worker to repair.

If the water pipe in the building is frozen, you can use a hot towel compress, a hair dryer to bake, a fire to bake the water pipe, and find a water company to solve the problem.

1. Apply a hot towel

When you find that the water pipes in the building are frozen, you can apply a hot towel to the frozen position, and the hot towel does not need to be very hot, as long as it is warm. The hot towel allows the frozen area to be thawed slowly, allowing the water supply to return to normal in the building.

2. Hair dryer baking

When you find that the water pipe of the building is frozen, you can also use the hot air stall of the hair dryer to continuously blow back and forth on the frozen position of the water pipe, so that the frozen position is slowly melted, and at the same time turn on the water pipe switch to release water, and you can stop the hot blowing when the water pipe resumes normal water supply.

3. Fire roasting water pipe

When you find that the water pipes of the building are frozen, you can also use fire to slowly melt the frozen area. When using this method for thawing, do not let the fire get too close to the water pipe, if it is too close, it is easy to cause the closed water pipe to burst.

4. Find a water company

If the frozen position of the building water pipe is located inside the wall or underground, then the user cannot thaw it by himself, so he needs to give feedback to the after-sales personnel of the water company, and then let the other party arrange professionals to help detect and thaw it.

Precautions for anti-freezing of water pipes in winter

1. The anti-freezing method should be prepared in advance, for example, it is necessary to take precautions in advance, so as to prevent some frost cracking phenomena in the future.

Now there are many materials that play a role in heat preservation, the more commonly used is to use cotton linen, in order to achieve a better effect, you can wrap a few more layers, you can also consider painting some patterns on it to decorate, and at the same time, you can also coat antifreeze on the outside of the tube, which also plays a protective role.

2. If it is in winter, it may be protected by indoor heating methods, and the use method should be noted, such as heating equipment, some people will have dripping water to solve, so it is relatively wet, so it is not recommended to use it like this, but the car can be assisted by using temperature sensing elements, for example, when the temperature reaches zero degrees, the switch can be turned on, and the water in the pipe will flow, so as to prevent freezing.

Method 1: Hot water thawing method of towel.

When the water pipe is frozen, we wrap the water pipe in a towel, and then boil a pot of hot water on it for watering, it can be thawed for normal use, if the freezing is more serious, you can water it for a while, remember not to pour hot water directly on the water pipe, direct contact between hot and cold can easily lead to the rupture of the water pipe.

Method 2: Hair dryer thawing method.

In fact, the hair dryer can not only dry the hair but also thaw, we will turn on the hair dryer hot air on the faucet to blow hot air evenly, if the faucet thaws, it will start to drip so that there is no need to blow the pipe; If it doesn't melt after blowing for a while, then blow the water pipe below.

Pour hot water on it first and see if it works.

Summary. It is best to boil a pot of boiling water, pour boiling water on the faucet or pour boiling water into the water pipe, so that it is possible to thaw, but sometimes the water pipe is too long, so it is not easy to thaw. With a towel, wrap the hose from top to bottom.

Bring a pot of hot water to a boil and let it sit for 5 minutes until the water temperature is slightly lowered. When the water temperature is lowered, pour boiling water over the water pipes from top to bottom. If the freezing situation is more severe, you can choose to pour hot water several times to thaw.

Heating is burned, plus water does not circulate.

It is best to boil a pot of boiling water, pour boiling water on the faucet or pour boiling water into the water pipe, so that it is possible to thaw, but sometimes the water pipe is too long, so it is not easy to thaw. With a towel, wrap the hose from the top to the bottom of the mould. Boil a pot of hot water, after the water boils, wait for 5 minutes, and wait until the water temperature is slightly lowered.

When the water temperature is lowered, pour boiling water over the water pipes from top to bottom. If the freezing situation is more severe, you can choose to pour hot water several times to thaw.

It is possible to buy a special electric heat tracing, wrap it around the water pipe, and then energize it, and in the case of the heating of the electric heat tracing, the water pipe will soon thaw.

It is best to boil a pot of boiling water, pour boiling water on the faucet or pour boiling water into the water pipe, so that it is possible to thaw, but sometimes the water pipe is too long, so it is not easy to thaw. With a towel, wrap the hose from the top to the bottom of the mould. Boil a pot of hot water, after the water boils, wait for 5 minutes, and wait until the water temperature is slightly lowered.

When the water temperature is lowered, pour boiling water over the water pipes from top to bottom. If the freezing situation is more severe, you can choose to pour hot water several times to thaw.

Burn the heating in the house or turn on the air conditioner, or make a stove to warm the house first, and the underground heating water pipes will melt. You can also perform a tapping experiment to determine where the radiator is frozen, and if you find that the radiator in your home is frozen, you should first determine where it is frozen, not turn on the heater. Because if you turn on the heating rashly, it may cause the water in the heating pipe to not flow and occur**.

Therefore, it is necessary to determine the location of the frozen first, so that Zen Ye can "prescribe the right medicine". When the frozen heating pipe is beaten, a crisp "ping-pong" sound generally occurs, and the user has to determine the frozen position by tapping. Then, find some used cotton cloth to wrap the heating pipes and pour hot water over and over again.

In this way, the ice can be forced to melt in the frozen area.

Did you get it?