How to add the full format of the ping command after the file What does this mean 5

Create a text file on the desktop, change the suffix to bat, right-click on the file, and type ping ** or ip. Or find the file under the C: Windows System32 folder and send the shortcut to the desktop.

Build one on the desktop. txt file, enter ping to save the text, and then add the suffix. txt to. BAT on the line!

The downside is that in a flash, nothing can be seen.

Hey, that's it.

To add, if you can't change the extension, first remove the "Hide known file extensions" option from the folder options.

The default ping is 4 times, but if you add the t parameter, it means that the ping never stops.

-t is the ping parameter, ping ip -t means ping a certain IP until you press control-c.

ping -t address can be updated to the external network address you need to connect to (or domain name, some domain names have been filtered and cannot be pinged, such as Sina Sohu and other large **) You can try this If there is no time out for a few minutes, it means that there is no problem. If you have any questions, you can continue to narrow down the scope and come to me.

reply from : bytes=32 time=50ms ttl=241

In this way, the request timed out is not dropped, that is, the return timeout.

Hacker teaching, the use of ping commands, instantly become a computer master.

The ping command is a program used to test the network connection, and its corresponding file name is ". Depending on the purpose of the test, this command can carry different parameters.

The downside is that in a flash, nothing can be seen.

Hey, that's it.

To add, if you can't change the extension, first remove the "Hide known file extensions" option from the folder options.

The implementation method and detailed operation steps are as follows:

1. In the first step, open the Command Prompt program window, as shown in the figure below, and then enter the next step.

2. Secondly, after completing the above steps, you need to enter the "ping" command in the command prompt as shown in the figure below, and then enter the next step.

3. Then, after completing the above steps, you need to set the command parameter "-n", as shown in the figure below, and then enter the next step.

4. Then, after completing the above steps, you can set any value to specify the number of self-sent packets as shown in the image below and proceed to the next step.

6. Finally, after completing the above steps, click the Enter key, and the command will be executed automatically.

As set in the demo, 6 packets will be sent as shown in the image below. In this way, the problem is solved.

The command is ping -l 65500 and the packets are valid from 0 to 65500.

The ping command also has many useful features for your reference:

ping [-t] [a] [n count] [l size] [f] [i ttl] [v tos] [r count] [s count] [j host-list] |k host-list]] w timeout] [r] [s srcaddr] [c compartment] [p] [4] [6] target_name

t, ping the specified host until it stops. To view the statistics and continue, type Ctrl+Break; To stop, type CTRL+C.

a, resolve the address to the hostname.

n count: the number of echo requests to be sent.

l size: the size of the sending buffer.

f, set the "Do Not Fragment" flag in the packet (IPv4 only).

i ttl, time to live.

V TOS, type of service (IPv4 only.) This setting has been deprecated and has no effect on the service type field in the IP header).

r count, which records the route of the count hop (IPv4 only).

s count, the timestamp of the count hop (IPv4 only).

j host-list, a loose source route used with the host list (IPv4 only).

k host-list, a strict source route that is used with the host list (IPv4 only).

w timeout, the timeout (in milliseconds) to wait for each reply.

r, also test the reverse route with the route header (IPv6 only). If you use this header, some systems may drop the echo request.

s srcaddr, the source address to be used.

c compartment, the identifier of the routing isolation compartment.

p, ping the Hyper-V network virtualization provider address.

4. Enforce the use of IPv4.

6. Enforce the use of IPv6.

You need to open the settings and enter the English letter to open the command.

If you remove the space ( ), it is not understood as an IP address, but as a hostname or domain name, and the corresponding actual address is, that is, you actually ping this address.

Hehe, you don't add a space, your address is.

Naturally, it will not pass, and it is necessary to add a space to distinguish it from the address.