How to execute Microsoft Edge on the command line

Running, microsoft-edge:

Note the colon that follows.

cmd, start microsoft-edge:

Traced specific command lines.

However, it is not possible to use it directly in operation.

Before the Edge process is created, an SVCHOST process is created (C: Windows System32

k dcomlaunch -p), the event result is the command line and process id above. When you have time, keep track of it.

1. After entering the Windows 10 desktop, click on the start menu, and then click on "Settings";

2. Then select "Update & Security";

3. Click "Recover" under the "Update & Restore" interface, and then click "Reboot Now" under Advanced Startup;

4. Select an option and select "Troubleshooting";

5. Click "Advanced Options" in "Troubleshooting";

6. Click "Startup Settings" in the advanced options;

7. Click the "Restart" button with pure laughter;

8. The electric Changchang brain will be restarted at this time, and after the restart, you will see the boundary as shown in the figure below. Press the "F4" key or the number "4" to select the safe mode. After you choose it, you will go straight in.

10. After the deletion is complete, run the following command in PowerShell to reinstall the Microsoft Edge browser:

$installlocation)\ verbose}

Once the reinstallation is complete, restart the operating system Edge browser and it should be ready to use.

Method 1 First, press and hold the keyboard, windows+r, the windows key is a square graphic key, next to alt. After pressing, type in:

After entering, press Enter (confirm), come to "Local Security Policyr" as shown in the figure, and then, follow **, open in turn: Security Settings > Local Policies > Security Options > User Account Control: Management Approval Mode for Built-in Administrator Account, and then, double-click it, it will be changed to:

Enabled, click Apply, and then tap OK.

When you're done, be sure to restart your computer.

Method 2 is the same, hold down the keyboard, windows+r, press it, and type: regedit, enter, finished, open the registry.

Navigate to the following locations in the registry (open in turn):

Find the filteradministratortoken on the right, double-click it, change the value data to "1", and then click "OK".

Note: If you don't have this "FilterAdministratorToken" on the right, you need to manually right-click on the right blank space to create a new dword (32-bit) value, and change it to FilterAdministratorToken, and change its value data to 1.

After the change, you have to change another one, the same, find it in turn: hkey local machine software microsoft windows currentversion policies system uipi

We see that there is a default item on the right. Change its value to 1

After the two are changed, restart the computer. Can. If you change it, there is still no solution. That means something else. "Special Notes" below

Special attention] Many people, unconsciously and arbitrarily, change the account control of the system. Maybe it's the antivirus software that helps you change it, or maybe the optimization software helps you change it. Turn down the account control, or turn it off.

However, it should be noted that the account control of the system is initially [default], do not change it randomly. If you change it, it will have an impact.

Recovery method: Control Panel - System & Security - Change User Account Control. Adjust the slider to default. It's OK when you're done.

A2When we open the Edge browser, the software says that we can't open the app, 3In this case, we can increase the user's account control privileges, which can be found on the desktop and click on the right-click - Properties - Security & Protection.

4.Go to the Security & Protection page, we find Change User Account Control in the options on the left, and click to switch to the page.

5.Then in the control window, we set the notification to the highest, click OK, and open the Edge browser again to basically solve the problem.

Try the following:

Click Start - Apps - Microsoft Edge - Advanced Options - Repair or Reset:

The control panel has a Windows Defender, if you use 360 or other PC Manager, it may be that this thing is banned, and Windows Defender can be used by turning on Edge. If it doesn't work, try other methods.,This is the method used when my computer can't open edge.,I hope it's helpful to everyone.。

1. First of all, open the Windows 10 system, select "Settings" in the start menu, and click to open.

2, then, select the "Apply" option in the settings and tap on it.

3. Select "Advanced Options" of "Microsoft Edge" in the window and click to open.

4. Finally, select "Reset" in the window, you can reset the Microsoft Edge browser and the problem will be solved.

1. After entering the Windows 10 desktop, click on the start menu, and then click on "Settings";

2. Then select "Update & Security";

3. Click "Recover" under the "Update & Restore" interface, and then click "Reboot Now" under Advanced Startup;

4. Select an option and select "Troubleshooting";

5. Click "Advanced Options" in "Troubleshooting";

6. Click "Startup Settings" in the advanced options;

7. Click the "Restart" button

8. The computer will restart at this time, and you will see the interface as shown in the figure below after restarting. Press the "F4" key or the number "4" to select the safe mode. After you choose it, you will go straight in.

10. After the deletion is complete, run the following command in PowerShell to reinstall the Microsoft Edge browser:

Once the reinstallation is complete, restart the operating system Edge browser and it should be ready to use.

Hello, this side for you to find the "three dots" button in the upper right corner of the edge, open the drop-down menu, click "settings" in the menu, and then in the left column of the "startup" and "new tab" is the place to set the home page and new tab.

However, if the homepage has been tampered with by malware, you must uninstall and clean up the malware first.

In addition, there is an option to "reset settings" in the Edge settings, which can erase all data from the Edge browser and restore it to the original state when the Edge was first installed, including the home page restore.

Here's how to reset the Microsoft Edge browser:

1. After entering the Windows 10 desktop, click on the start menu, and then click on "Settings";

2. Then select "Update & Security";

3. Click "Recover" under the "Update & Restore" interface, and then click "Reboot Now" under Advanced Startup;

4. Select an option and select "Troubleshooting";

5. Click "Advanced Options" in "Troubleshooting";

6. Click "Startup Settings" in the advanced options;

7. Click the "Restart" button

8. The computer will restart at this time, and you will see the interface as shown in the figure below after restarting. Press the "F4" key or the number "4" to select the safe mode. After you choose it, you will go straight in.

10. After the deletion is complete, run the following command in PowerShell to reinstall the Microsoft Edge browser:

Once the reinstallation is complete, restart the operating system Edge browser and it should be ready to use.

2. In the window that opens, enter "%userprofile% appdata local packages" in the address bar and hit enter. As shown in Fig;

6. Right-click on the "Windows PowerShell" option. In the pop-up option box, click "More" - Run as Administrator. As shown in Fig;

8. In the command line in the run box, enter "get-appxpackage -allusers -name |." foreach 。and press Enter. As shown in Fig;

1. First of all, click the win10 icon at the bottom left of the main interface of the win10 system computer, and the drop-down menu will pop up, and you can find the Microsoft Edge application in the drop-down menu, as shown in the figure below.

2. Next, enter the PowerShell command in the search web and windows input box below to find the Windows PowerShell desktop application, as shown in the following figure.

5. After the command program is entered, click the Enter key, and then the Windows PowerShell command window can find the application package program of Microsoft Edge, as shown in the following figure.

for windows 10:

The upstairs method sometimes doesn't work, I should be able to do this (as long as you're the administrator):

Right-click on Properties.

Please click Enter a description.

Properties: Click Security, then Advanced, then Change (see Details) and click Enter Description.

Change the input of administators (see ** for details), click OK and click Enter ** description.

Make sure to click on the blue (**) button below to change permissions.

Please click Enter a description.

Please click Enter a description.

Check Full Control to delete!

Please click Enter a description.