Can the shock absorption of the car be adjusted, and can the shock absorption of the car be changed?

At present, the shock absorbers of automobiles cannot be adjusted to soft and hard. Unless you find yourself a shock that can be adjusted to the soft and hard. Depending on the quality of the shock absorber, determine whether it needs to be replaced. There are the following:

First, make the car stop after driving 10km on the road surface with poor road conditions, touch the shock absorber shell with your hands, if it is not hot enough, it means that there is no resistance inside the shock absorber, and the shock absorber does not work. At this time, you can add appropriate lubricating oil, and then carry out the test, if the shell is hot, it is a lack of oil inside the shock absorber, and sufficient oil should be added; Otherwise, the shock absorber is out of order.

Two, press the bumper hard and then release, if the car has 2 or 3 jumps, then the shock absorber is working well.

Third, when the car is driving slowly and braking urgently, if the car vibrates violently, it means that there is a problem with the shock absorber.

Fourth, remove the shock absorber to stand upright, and clamp the lower end of the connecting ring on the vice, pull and press the damping rod several times, at this time there should be stable resistance, the resistance to pull up (recovery) should be greater than the resistance when pressing down, if the resistance is unstable or no resistance, it may be that the shock absorber is lacking oil inside or the valve parts are damaged, and the parts should be repaired or replaced.

Hello, the shock absorption of the car can be adjusted, I wish you a pleasant use of the car.

Hello, the shock absorption of the car can be adjusted.

Yes, go to a garage or tuning shop.

Hello landlord! The shock absorption of automobile inspection can generally be changed. But try not to change it, and if you want to change it, let a professional do it.

Summary. <>

Hello dear, I'm glad you asked about the car shock absorber can be adjusted.

No, the front wheel shock absorbers are self-adjusting. The shock absorber is used to suppress the impact from the road surface after the spring is absorbed. It is widely used in automobiles to accelerate the attenuation of frame and body vibrations to improve the driving smoothness of automobiles.

When passing over uneven roads, although the shock absorbing spring can filter the vibration of the road surface, the spring itself will also have reciprocating motion, and the shock absorber is used to suppress this spring jump.

In the suspension system, due to the impact of the elastic element to produce vibration, in order to improve the smoothness of the car driving, the shock absorber is installed in parallel with the elastic element in the suspension, and the shock absorber is mostly a hydraulic shock absorber in the automobile suspension system for attenuating vibration.

Can the shock absorption of the trolley be adjusted?

<>Hello dear, glad for your question Can the shock absorber of the car be adjusted No, the front wheel shock absorber of the sedan is automatically adjusted. The shock absorber is used to suppress the impact from the road surface after the spring is absorbed. It is widely used in automobiles to accelerate the attenuation of frame and body vibrations to improve the driving smoothness of automobiles.

When passing over uneven roads, although the shock absorbing spring can filter the vibration of the road surface, the spring itself will also have reciprocating motion, and the shock absorber is used to suppress this spring jump. In the suspension system, due to the impact of the elastic element to produce vibration, in order to improve the smoothness of the car driving, the shock absorber is installed in parallel with the elastic element in the suspension, and the shock absorber is mostly a hydraulic shock absorber in the automobile suspension system for attenuating vibration.

Hello, dear, thank you for your patience, the answer has been found for you, you check it out, ·· Thank you! <>

Replacing the shock absorber of the car, you need to pay attentionShock absorbersIt is necessary to use accessories produced by regular manufacturers to avoid damage to the shock absorber when the car is driving. To replace the shock absorber of the car, you also need to pay attention to the use of special tools, replace the shock absorber for the car, and go to the car repair shop to do it after changing the shock absorberWheel alignmentto avoid excessive wear of one side of the tire when the car is driven for a long time. The shock absorber of the car is a consumable accessory, the longer the car drives, the shock absorber will slowly stretch, and the car will reduce the comfort when driving, and there will be bumps up and down.

There are also some cars often driving on mountain roads, muddy roads will speed up the loss of shock absorbers, therefore, car shock absorbers are used for too long, or often walk on muddy roads, we must pay attention to timely replacement, so as to avoid traffic accidents.

1. The replacement shock absorber must pay attention to the regular manufacturer to buy, and see the specifications and models of the shock absorber clearly, so as to avoid damage to the shock absorber when in use

When buying shock absorbers, you must choose products produced by regular manufacturers to see whether they meet national standards, so that you will have no worries. When you buy shock absorbers, you must look at the model and specifications used in your vehicle, so as to avoid improper installation when replacing them. Due to the mixed quality of goods on the Internet, it is recommended that you go to a physical store to buy a car shock absorber.

If you can't install it, some brick-and-mortar stores will also provide technical support.

It's more *** than the online store.

Second, the shock absorber must pay attention to the use of special tools to tighten the screws, and go after replacement4S shopCheck the wheel alignment to avoid excessive wear on one side of the tire in the future

When replacing the shock absorber, you also need to buy a special screwdriver.

Tighten the screws, ordinary screwdrivers cannot tighten the screws of the shock absorber enough. Sometimes, after replacing the shock absorbers, the car will deviate, and the tire on one side will wear too much after driving too long. Therefore, after replacing the car shock absorber, it is necessary to test the four-wheel alignment to ensure the safe driving of the car.

So, do you know the benefits of replacing a shock absorber for your car?

In the process of changing the car inspection, you must ask a professional master to come, because this is related to the safety of the car, if there is a step not done, it will make the car in the driving will be very damaged.

We should pay attention to the use of a wrench to screw the screws, and we must also operate it well, and we should also use some better tools, which should pay attention to our own safety and pay attention to the problem of springs, which should be paid attention to.

First of all, match whether the vehicle and the product are compliant; Record the height data of the original body, and go to a professional store to replace it with professional tools (some functions and service life of shock absorption will be damaged by yourself);

It is recommended to replace it in pairs, and the service life will be longer;

Now they have all been replaced, complete sets of accessories, saving much money;

After replacement, be sure to do four-wheel alignment;

Just after changing the shock absorber, the body may be a little high, drive for a while, after running-in, it will return to normal;

First of all, it is necessary to use a special torque wrench to operate, the operation should be standardized, the position of the spring rotation base and the spring should not be misaligned, every screw on the chassis should be tightened, and the four-wheel alignment should be re-done.

1. The front shock absorber needs to be disassembled, open the screw plug at the largest end, there is a spring inside, add a section of tube on the spring to increase the amount of preload, so that it will feel harder, and the longer the tube is added, the more obvious it is.

2. There are two kinds of rear shock absorption, one is to look at the support ring under the spring, there is a tooth-like shape, which can adjust the big nuts on both sides to adjust the tightness. The other is a motorcycle type, which needs to be adjusted with special tools to adjust the adjustment block at the bottom, and non-professional maintenance can only be like the front reduction, adding a spacer at the lower end of the spring to improve the stiffness of the spring.

3. The shock absorber of electric vehicles is an extremely important part of electric vehicles, the role of shock absorbers is to support the body of electric vehicles, connect the reaction force of the road to the body, and have the functions of easing the impact of the body, weakening the vibration of the body, and improving the grounding of the tire.

According to the driving characteristics of the car, the following requirements are especially put forward for the shock absorber.

In the compression stroke of the suspension (the wheels are close to the body), the shock absorber should have a small damping force to make full use of the cushioning effect of the elastic elements and reduce the road surface to the body.

of shocks. In the extension travel of the suspension (the wheels are away from the body), the shock absorber should generate large damping in order to quickly attenuate the vibration.

When the relative velocity between the wheels (axles) and the body (frame).

When it is too large, the shock absorber should be able to automatically increase the overflow hole overflow area to limit the excessive growth of the damping force and avoid excessive shock load on the shock absorber.