What details do you need to pay attention to when purchasing engineering tiles?

1. Check the label.

Generally, regular tiles will have labels, and the labels will also indicate the specifications, quantities, trademarks, production dates and other standards of the products and CCC certification marks. For our general home decoration, products with radionuclides that meet the requirements of Class A are more suitable.

2. Observe the appearance carefully.

We can put the tile in the light, a meter away from us to observe vertically, if you can't see obvious glaze defects, it proves that the tile is good, the general quality of the ceramic tile glaze is smooth, delicate, the glaze gloss is also better, and the matte glaze is soft and comfortable.

3. Check the effect of splicing.

We can put several tiles on a plane spliced together, the deviation is relatively small, there is no uneven phenomenon, the gap is small, and the overall look will be smooth and beautiful after the good tile is paved. Defective products are less effective.

4. Listen to sounds.

We pick up the tile and put it in our ears and gently tap it to judge the quality of the tile by its sound, and the good will sound crisp and pleasant. However, due to the uneven raw materials, short firing time, low temperature, etc., the poor quality will emit an empty sound, which will feel harsh to listen to.

Fifth, heavier weight is better.

We can take out the tiles of the same specification and weigh them, the heavier ones are better, the water absorption rate is very low, and the quality is better.

Sixth, according to different types of comparison.

We can compare according to the classification of tiles, glazed floor tiles are generally used in bathroom and kitchen and other floor decorations, and are used in conjunction with interior wall tiles. Floor tiles are generally polished and are often referred to as polished tiles. The water absorption rate of polished tiles is lower than that of vitrified tiles, also known as vitrified tiles.

The surface of the polished tile is very smooth, and it is a relatively high-grade ceramic product.

7. Corner issues.

We will encounter the phenomenon that the corners can not be aligned when we decorate the tiles, such tiles do not meet the standards, so we should pay attention to this problem when choosing tiles, we can use our eyes to observe along the edge and diagonal of the tile, if there is a warping phenomenon, it proves that the straightness of the tile is not good enough. I hope the above methods can help you buy tiles!

A look: the color of the tile should be uniform, the surface finish and flatness should be good, the surrounding rules should be regular, the pattern should be complete, and a few pieces should be extracted from the same packaging box, and there should be no defects such as color difference, deformation, lack of edges and corners.

Second listening: Tap with a hard object, the crisper the sound, the higher the degree of porcelainization, and the better the quality. You can also clip the corner of the tile with the thumb, index finger and middle finger of the left hand, hang down easily, and tap the middle and lower part of the tile with the index finger of the right hand.

Three tests: drop the water on the back of the tile, see the speed of infiltration after the water spreads, generally speaking, the slower the water absorption, the greater the density of the tile, the better the quality; On the contrary, the faster the water absorption, the sparse density, and its quality is not as good as the former.

Four quantities: the higher the accuracy of the side length of the tile, the better the effect after paving, buying high-quality tiles is not only easy to construct, but also can save man-hours and accessories. Use a tape measure to measure whether there is a difference in the size of each tile, and the high accuracy is the top grade.

In the process of selecting tiles, what details need to be paid attention to?

1.The most intuitive way to choose a tile, even if you look at it, observe it, see how smooth and uniform the surface of the tile is. When you choose it, you can randomly take out several tiles to compare and see if its surface is in full condition without any power loss.

And whether its surroundings are regular, without any bumps and omissions, can ensure its better use effect. You can choose a few tiles at random and then put them all together to see how the gaps between them fit together. Of course, it's great to make them smaller.

If the tile we choose is a pattern style, we need to use 4 tiles to splice to see if there will be a clear pattern and a unified color, which will make the decoration more fashionable and beautiful.

2.Don't care too much about the brand of tiles, as long as it's an old brand. Now the products of ceramic tiles are very stable, and there is no need to pay a high price for the so-called famous brand tiles.

The choice of tile color is important, because the home is paved with a large area. If you choose the wrong tile color, it will greatly affect the beauty of your home. Therefore, when decorating the home, it is necessary to set the decoration style of the home, and then look at the bricks.

Floor tiles in kitchens and bathrooms should be non-slip. Kitchen and bathroom tiles often inevitably have water, so pay attention to this detail. There are many considerations in the selection of ceramic tiles, which should be judged from several angles in the selection process, including design style, product quality, probability, brand quality and so on.

3.When choosing a tile, we start with its appearance, choose a tile with better reflectivity or a smooth polished surface, then choose a tile with a color and size that matches the room, and then measure the firmness of the tile and use the material. Observe the color and flatness of the tile surface.

Generally, the cleaner the color of the tile, the better the reflection effect. Also, if you look at the pinholes, they may pile up. It is also possible to check the surface quality of the tile by checking the quality of the traces, and to determine the surface of the tile by scraping the tile glaze with a solid object.

On-site measurements of tile purchases. Measure the four sides and diagonals of the tiles with a ruler or tape measure and check the dimensions.

When decorating the home, many places need to be tiled, especially the bathroom and kitchen, try to choose tiles, should choose a tile with a relatively flat texture.

It is necessary to pay attention to the selection of tiles, to see the size of the tiles, whether the tiles can be perfectly connected with the tiles, and to gently knock on the tiles with your hands to see whether the sound of the tiles is crisp, whether it is easy to clean, and whether there will be serious scratches.

When selecting ceramic tiles, we must pay attention to whether there is damage, whether there will be inferior products mixed in it when selecting, we need to pay attention to the brand, we need to pay attention to the quality, we need to pay attention to the style.

It is necessary to see the smoothness of the surface of the tile, the degree of uniformity, the integrity of the tile, the platform of the tile, and the brand of the tile.

When buying ceramic tiles, you need to pay attention to the appearance, color, and sound, and you can also drop water on the back of the tile to see how fast and slow the water is invading after three openings. The details are as follows:

1. Look at the appearance.

High-quality tiles should be smooth and flat, with no air holes or bulging. The feel is delicate and gentle, with no roughness. The color of the tiles should be uniform. When the tiles are delivered, the owner should conduct a random inspection of the tiles to see if there are any defects such as color difference, deformation, lack of edges and corners.

2. Look at the color.

The color of the tile is extremely important for the layout style of the whole home, and the corresponding choice should be made according to the actual decoration style. No matter which décor you choose, you must ensure that the décor pattern is natural and there is no color distortion of the tile.

3. Listen to the sound.

The crisper the sound when gently tapped, the higher the degree of porcelain and the better the quality. You can also use your left thumb, index finger and middle finger to clamp the corner of the tile, hang it down gently, and tap the middle and lower part of the tile with your right index finger, if the sound is crisp, it is the top grade; If the sound is muffled, it is inferior.

4. Drip test.

You can drop water on the back of the tile to see how fast the water invades after three openings. Generally speaking, the slower the water absorption, the greater the density of the tile; On the contrary, the density of the tiles is sparse. A needle with high density and low water absorption should be chosen.

Such tiles are not prone to scratches, easy to clean, durable and corrosion-resistant.

Notes:

1. When purchasing, it is necessary to pay attention to whether the logo and specification and color number on the tile packaging box are the same, and whether the product certificate, trademark and quality inspection label are clear.

2. The color of a good bottom blank is the color between beige and beige, if the color of the base material is yellowish or black, it is not a good product.

Be sure to pay attention to the anti-fouling ability of ceramic tiles, which is a very important point, because it is likely to be very convenient when cleaning in the future, and you must choose a strong anti-staining ability when choosing.

Don't choose pure white, or even don't choose a solid color, the solid color of the tile is either too dirty, or too dirty, off-white or comprehensive color will be much better.

Answer: I bought Chuangrui tiles, I looked at these aspects when choosing: the first size: the size of the product is the same, which can save construction time and is neat and beautiful.

Water absorption: the lower the water absorption, the better the degree of vitrification, the better the physical and chemical properties of the product, and the less likely it is to crack or peel due to thermal expansion and contraction due to climate change.

Flatness: The tile with good flatness has no bending, no warping angle, easy construction, and the ground is flat after construction. Strength: high flexural strength, good wear resistance and heavy pressure resistance, not easy to wear, long-lasting, suitable for use in public places.

Color difference: lay the tiles flat on the floor, put them together into a square meter, and whether there is a different shade of color or cannot be connected from three meters, resulting in aesthetic obstacles.

Ceramic tiles are a very important part of decoration, not only the overall cost is high, but if there is a problem, the loss will be large. So let's sort out the types and precautions of tiles for you. First of all, there are many types of ceramic tiles, and there are certain differences in the quality and place of use of tiles of different types and materials.

Ceramic tiles are divided into floor tiles, wall tiles and waist line tiles according to their functions. Ceramic bricks are divided into glazed tiles, full-body bricks, polished tiles, Bobian bricks, and porcelain mosaic tiles according to the process.

When choosing ceramic tiles, you need to pay attention to the following aspects: see whether the appearance of ceramic tiles is smooth. Just imagine, if the surface and sides of each tile are not smooth, no matter how good the tile shop is, it will not be able to post the overall smooth effect; See whether there are spots, cracks, bricks, ripples, peeling, lack of glaze and other problems on the surface of the tile, and whether the size is consistent.

Look at the design and color of the ceramic tiles. The designed product patterns and colors are exquisite and lifelike, while the patterns and colors of ceramic tiles with poor design quality will be lacking in color, broken lines and misplaced; Distinguish the color on the back of the tile. The reverse color of glazed bricks is vermilion, while the reverse side of Bobian bricks should be milky white.

Listen to the timbre of the tiles. The method is to carry the edge of the brick and knock the brick with one hand, the sound of the good brick is crisp and loud, and the bad brick is low and muffled. Those who have tried to distinguish between glass and jade should remember that it is actually a similar method, except that they listen to the sound of glass and jade colliding.

Please look at the hardness of the tile. To put it bluntly, bricks of the same specification, if you hold it in your hand, the bricks that sink much more indicate that they have high density and high hardness. The daredevils see the opposite side of the tile.

Turn over the tile, drip some water on the back, the slower the speed, the denser the texture, the better the internal quality, the bad brick is not only fast, but also turn over the brick after a while, and can make the watermark high to positive, which is why some people use inferior wall tiles, the original bright brick surface looks like"101 Dalmatians", that's because the water in the cement has been filtered out.

When choosing tiles, we can use these simple methods to distinguish, which will allow you to choose high-quality and low-cost tiles!

When choosing tiles, you should listen to the sound, the more crisp the tile, the better the degree of porcelainization, and the higher the quality.

When choosing ceramic tiles, you must choose a good quality, and the pattern should be beautiful and generous, and it is more resistant to dirt and durable. It is best to choose non-slip tiles that are not easy to slip.

First of all, the color of the tile should be coordinated with the entire decoration style, and the pattern should be beautiful and generous, and the tile should choose a big brand, so that the quality is guaranteed.