How to calculate the wardrobe according to the projected area, and how to calculate the area of the

The projected area is the width of the wardrobe multiplied by the height.

The area is the sum of the area of each board.

First, the specific algorithm of the projection area of the wardrobe.

Length measurement: When measuring the length of the wardrobe, it should be noted that the position of the reserved doorway switch is 150-200mm, and this part should be reduced.

Height measurement: The height of the wardrobe is the size from the ground to the top, and the general wardrobe exceeds 2200-2400mm, and the top cabinet will be made on top.

Depth measurement: The depth of the wardrobe is generally 550mm-600mm.

The projected area is the measured length of the wardrobe multiplied by the height of the wardrobe.

Second, the specific algorithm of the area.

The area is a little more scientific than the projected area, and he completely decomposes the wardrobe.

The area is to calculate the material used for each board used in the wardrobe.

To calculate the projected area of a cabinet, you can calculate it by multiplying the length of the cabinet by the height of the cabinet.

If you calculate the ** of the cabinet according to the projection area of the cabinet, then you should multiply the length of the cabinet by the height of the cabinet, and then multiply it by the unit price of the cabinet to calculate.

If the length of the cabinet is meters, the height of the cabinet is meters, then the projection area of the cabinet is flat, and then as long as the projection area is multiplied by the unit price of the cabinet, you can calculate the cabinet **, but the door area of the cabinet is generally not included in the projection area of the cabinet, and the area is generally calculated separately.

Generally speaking, it is easier to calculate the projection area of the cabinet in a slotted cabinet, if the cabinet has a corner, that is, it is L-shaped, then when calculating the projection area of the cabinet, the cabinet should be divided into two cabinets to calculate, and then the projection area of the two cabinets is added together to be regarded as the projection area of the L-shaped cabinet.

Projected shadow area** is generally equal to area x (a factor to 3).

The meaning of the coefficient is that it is basically all used in Yitong, and very few partitions are used. Projected Area** = Area; A factor of 3 means that there are at least 2 drawers with trouser racks and a decent number of partitions with moderate fittings. Projected area** = area x 3.

Generally speaking, there are a lot of accessories in the calculation of the general family, and it is more appropriate to estimate it with the left and right coefficients.

Of course, these are just empirical calculations. The area is actually designed by installing the wardrobe in your mind, and the amount of materials used is counted, which is a relatively fair way to calculate.

The projected area is actually just the calculation of the outline area of a wardrobe, the length and width. In the case of the same external area, the internal design basically does not affect **.

The area is to completely separate a wardrobe, such as hardware: how much is a clothes, how much is a hinge, etc., some even count screws. Then, the cabinet is again for each board and each wrench to calculate his area.

The projection area calculation method is only used as a way to roughly measure the area of the cabinet, and the most accurate calculation method is the area calculation, both of which are commonly used valuation methods for wardrobes

1. The area of the top plate, the bottom plate, the sum of the length and width of the two vertical plates, the shelf and the back plate of the cabinet;

2. The calculation method of the projection area: the width and height of the cabinet (the coefficient of 2 5 3 5);

The coefficient is only an estimate, according to the complexity of the actual composition of the wardrobe and the use of accessories and change, such as the structure of the wardrobe without drawers, no accessories, simple laminate structure, the selection coefficient is generally 2 5, if the structure of the wardrobe has a small number of drawers, a small number of shelves, a small number of functional hardware accessories, the coefficient is generally 3.

The projected area is the measured length of the wardrobe multiplied by the height of the wardrobe.

Projected area pricing is significantly simpler than area pricing. If you don't think about it, you will definitely think that the projection is cost-effective, because the same blind area of the hall and the same ** projection do more things.

In fact, if it is really the same product and the same material, when the merchant formulates, the total price calculated by the projection area must be equal to the amount calculated according to the area. For the same projection area, the more complex the shape, the more expensive it is, no matter which way it is calculated.

Why this is the case, it's actually quite simple. Because merchants don't operate at a loss.

Cabinet, projection calculation is actually the front plane calculation, length * height. The calculation is three-dimensional calculation, and each board of the cabinet, the clothes pass, the sliver, the hinge, the handle, etc., are calculated one by one. Note a little:

Drawers, trouser hangers, tie closures, mirrors, clothes rails, etc., should not be in them, because now, basically, whether it is a projection or a projection, it is an extra calculated appearance empty.

The projection area calculation method is only used as a way to roughly measure the area of the cabinet, and the most accurate calculation method is the area calculation, both of which are commonly used valuation methods for wardrobes

1. The area of the top plate, the bottom plate, the sum of the length and width of the two vertical plates, the shelf and the back plate of the cabinet;

2. The calculation method of the projection area: the width and height of the cabinet (the coefficient of 2 5 3 5);

The coefficient is only an estimate, according to the complexity of the actual composition of the wardrobe and the use of accessories and change, such as the structure of the wardrobe without drawers, no accessories, simple laminate structure, the selection coefficient is generally 2 5, if the structure of the wardrobe has a small number of drawers, a small number of shelves, a small number of functional hardware accessories, the coefficient is generally 3.

Answer: The ratio of the projection area and area of the wardrobe is generally about 3, provided that not only its back panel is considered, but also the size, type and complexity of the internal structure of the cabinet should be considered. The calculation method of the projected area is simpler than the calculation method of the area, the projection area is the length of the wardrobe * the width of the wardrobe, and the projection area should be decomposed of all the wardrobes, and then calculated separately and finally all added.

The projection area of the cabinet is the length of the whole cabinet multiplied by the height, and the projection area multiplied by the unit price of the cabinet can get the total price of the cabinet, the area is the area of each side that can be seen in the cabinet needs to be calculated separately, and then the area of these sides is added to get the overall area of the cabinet. The unit price of the cabinet is multiplied by the sum of the area, which is the cost of the cabinet.