Samsung GT One E1202 screen locked, I don t know the password

1. In the case of shutdown, press the 3 buttons of up and down volume button and home button at the same time, and then press the power button to power on and enter recovery; 2. Use the volume button to select the third item, wipe data factory reset->> factory reset meaning, press the home button, press 2 times; 3. Then select the first item Reboot to restart, note that while restarting, press the lower volume button, home button (and power button) to enter flash mode. Resolution: 1:

Press the volume button and the home button at the same time to power on; 2: Press the volume button and the home button at the same time to turn on the computer; 3: Press the upper and lower volume keys and the home button at the same time to power on; There are 3 boot screens.

When you do the first operation, the screen will display the following letters in English, four options, as follows: 1. Reboot System Now---Restart 2. Apply SDCARD: Load the files in the SD card 3. Wipe Data Factory Reset---Restore factory settings 4. Wipe Cache Partition--- Clear the cache Select the third one with the volume up and down keys, press the home button to confirm, and you're done.

2.Samsung account password.

If the problem persists after the above methods, we recommend that you send your phone to a Samsung service center for processing.

Hello dear, if you have forgotten the password of your Samsung GTE1220 phone, you can use the following methods to unlock it:1To use a backup code, you can first try entering a backup code (if you have one), which is usually a set of numbers provided by the phone manufacturer's racket operator that can be used to reset the password.

2.Use Google to reset You used to bind Google to your Samsung GTE1220 phone, after entering the wrong password multiple times, you will see an option to "Forgot Password", after clicking on this option, you will be prompted to enter your Google Positive Voltage and password. After entering the correct Google and Mihora Code, you can reset your phone through Google.

3.If the above two methods do not solve the problem, you can consider doing a factory reset. Please note that this will erase all data and files stored on your phone, so make sure you have backed up important data or moved it to another device.

Here's how to do it:- Turn off your Samsung GTE1220 phone. - Press and hold the volume up, power, and home buttons until the "Samsung" logo appears.

Release all the keys, after which you will enter the phone recovery mode. - Select "Wipe Data Factory Reset", then confirm your selection and wait for your phone to automatically complete a factory reset. The applicability of these methods may vary depending on individual settings, phone model, and software version

Unlock phone lock: *2767*2878 Chip reset: *2767*3855 Can also be used to unlock the lock or card lock Adjust contrast:

Look at the software version:* Samsung 6 million multi-use password: 9998 Samsung 600 code chip reset instruction:

*2767*2878 or *2767*3855 for the old version; The new version uses *2767*7377. (Enter in no card state) Samsung A100-A188 look at the version: * WAP reset 2767*927 can solve the fault of "please wait" in some models X199 mobile phone lock:

Go to the card and enter *759 813580, enter 73, and after the dot appears, enter 02 to start. The data inside will be all cleared N299, A399, A539, A599 Manual unlock: Enter *759 to enter factory mode, press 29, and the lock will be automatically released after two or three minutes A188 A388 unlock SIM card lock:

Input without card* displays an error message; Re-enter *; Press the up button to find the PKK code, there is a 9-digit number, remove the first digit and write it down; Turn off the card and attach it, and type the last 8 digits after powering it on to unlock it. Samsung A408 unlock SIM card lock: enter * without inserting the card, then look up and down the PCK code, remove the first position is the SIM card lock to unlock the password.

Samsung 2400 unlock secret: power with the tail plug, boot without installing the card, reinstall the card, enter 2767 2878, and then press and hold the power button until the display "Please wait" is displayed, then release the button; Then turn off the password in the secret menu. Samsung A800 unlock instructions:

The password for unlocking the phone is: *2767*2878; Enter *2767*637 without inserting the card, and the mobile phone will automatically turn off and on again, which can unlock the network lock. Samsung S308 A408 Phone Initial Password and Change Phone Password:

00000000 Samsung N628 S308 S508 V200 V208 T108 T408 Unlock Command: *2767*2878 Phone Current Reset (Phone Unlock); *2767*3855 Phone EEPROM Total Reset (Fix Software Failure); *2767*7377 Reset command to solve the password of the mobile phone. Samsung A188 A388 A408 T208 S108 S308 engineering mode prefixes are all *; Samsung A288 N288 N628 T108 T408 T508 Engineering mode prefix is *

Samsung S508 Factory Reset Instruction: Samsung A300 A800 Unlock Instruction: *2767*637 (Add) Samsung S105 Reset SIM Card Command:

Unlock Command: (Add) Samsung S100 S300 V200 Unlock Command: *2767*7822573738

A factory reset of Samsung phone does not require a password. If your phone is prompting for a password, there are a few possible reasons:

2.Samsung account password.

How to force factory reset for Samsung phone;

1. Shut down. 2. Press and hold the home + power button + volume up button at the same time or press and hold the power button + volume up button at the same time until you enter recovery mode.

3. Use the volume button to move and select Wipe Data Factory Reset.

4. Home button or power button OK.

5. Go back, select Wipe Cache Partition and confirm.

6. Restart.

If the Samsung E1220 mobile phone has set its own password and cannot be unlocked, it is recommended to bring the three-pack certificate and the mobile phone to the local Samsung service center to unlock it.

First, change the card back to the original SIM card, then turn it on and enter the standby interface.

The second type: you can insert a SIM card, turn on the phone, press "SOS" and dial 112. Then remove the card and put it back on.

After entering the standby interface, click Settings - Security - "SIM Card Lock".

This section is divided into key parts, enter the "SIM card lock" option, we see that it has been set to "active", at this time, don't directly select "invalid" as it will also ask you to enter the password. You don't know the password, and you can't turn it off. We can turn off the "SIM card lock" indirectly.

Check "Active" again, it will ask you to enter a "new password", and then you can enter your new password that you have customized, 4 to 8 digits, set it twice. Since this type of lock does not have an initial password, it is important to keep it in mind after it is set, otherwise this step will have to be repeated.

After setting a new password, check "Invalid" and click to pop up to enter the password. Enter the password you just set and press "OK" to turn off the SIM lock.

However, it should be reminded that the above methods only work for some mobile phone models, if the click "Active" shows "Activated", the mobile phone can only be sent to the designated service center or repair point to unlock.

According to your description, the Samsung E1202i phone has set its own password and cannot be unlocked, it is recommended that you bring the three-pack voucher and the phone to the local Samsung service center to unlock it. Please visit the specific service center address.

Samsung GT-E1202i mobile phone locked, forgot the password, take a look at the detailed operation steps:

1: Turn off your phone completely.

2: After completely shutting down, press and hold the volume up button + home button + power button together, don't loosen, enter recovery mode after a while, note: press the volume up and down keys in recovery mode to select, press the power button and home button to confirm.

3: After entering the recovery mode, you can choose to restore factory settings, whether your phone is the recovery that comes with the system or the recovery of a third party, as long as there is an item of [wipe data factory reset] (Chinese version: erase all data).

4: Select [wipe data factory reset] (in Chinese, erase all data), then press the power button to confirm, and then select [yes - delete all data].

5: Then re-select [Reboot System Now], press the power button to confirm, and then start the phone.

With a PUK code. Telecom,Unicom has to use a professional instrument to unlock the big card connected to the SIM card,The old Samsung SIM card password is decoded by the corresponding mobile company,It has nothing to do with the machine。 The phone lock is set by yourself.

Hello: According to the description, if you forgot the password of the lock screen of your phone, it is recommended that you 1Determine whether the phone is bound to a Samsung account, the data switch is turned on, and you can log in to unlock the screen through the remote control of the phone.

Welcome to Samsung's Digital Services platform.