How many ways are there to attach floor tiles to floor tiles?

Dry paving method 2Wet paving method 3Wave line laying method 4Traditional paving.

Kitchen and bathroom walls and floors, regardless of the type of tile, can be directly applied to the old tiles with new tiles.

First of all, it is necessary to remove the dust and dirt on the surface of the old tile, and then use the tile adhesive to do the base layer on the old tile, and the new tile can be directly pasted after the batch is completed. The adhesive should also be applied thin on the back of the new tile, and the thickness should be subject to the back pattern of the covered tile, so that the new tile will be more firmly glued.

When paving new tiles, use a rubber hammer to tap the new tile edge to adjust the edge, you need to pay attention to the reserved expansion joint, 24 hours later, wait for the tile adhesive to dry thoroughly, and use the grout to hook the joint. With the right tools, consumers can do their own DIY.

Tips: Individual seriously bulging or damaged tiles need to be removed, after shoveling, repair with mosaic surface tile surface treatment agent, and after the surface of the old tile is as smooth as the old tile, then paste the new tile with tile adhesive, which is more firm.

1. Straight line laying.

Advantages: decent and generous, simple and neat. Let the appreciators feel the strong texture of the floor tiles.

2. I-shaped paving.

Advantages: Generally, those who like the I-shaped paving method are young people who pursue novelty. There is a refreshing feeling with this method, and the I-shaped paving lines are beautiful. It's also a good choice.

3. Diagonal paving method.

Advantages: The straight line is very smooth, there is a feeling of infinite extension, and the visual impact is extraordinary. It is also one of the commonly used laying techniques.

4. Group assembly paving method.

Advantages: This paving method uses large and small floor tiles to match, with clear patterns and rich patterns. Most of them are used for corridors, living rooms, dining rooms, and entrance entrances as key designs.

1. There are 5 ways to stick floor tiles on floor tiles. Fishbone Patching: The fishbone tiling method is named because the paving effect resembles the bones of a fish, which is actually a combination of the 45-degree collage method and the diamond-shaped collage method.

2. Human-shaped early bright silver spelling: The human-shaped collage method is somewhat similar to the fishbone collage Lu Yan, but there is a little change in the treatment of the corners, the fishbone method is smoother, and the human-shaped law has edges and corners.

3. Oblique column spelling: The oblique column paving method is a variant of human-shaped paving, and the main difference is the angle change when paving, and the oblique column method is more obvious.

4. Roof ridge spelling: Roof ridge paving method, as the name suggests, the paving effect is like a roof ridge, with a very obvious sense of concave and convex.

5. M spelling method: M-shaped paving method is a paving method that combines human-shaped paving method and symmetry method, and the sense of pattern key preparation is stronger.

Floor tiles are inseparable from each of our families when decorating, because we know the importance of floor tiles when we choose, so we attach great importance to how to do it during construction. So do you know what we need to pay attention to when pasting floor tiles? A lot of people don't know!

The method and precautions for sticking floor tiles!

1. Tile soaking. Clean the purchased tiles first and soak them for more than 2 hours. The purpose of soaking is to allow the tile to fully absorb enough water, so as not to absorb the moisture in the material after the completion of paving, resulting in insufficient moisture of the adhesive, affecting the firmness of the adhesion, thus causing hollowing and falling off.

Tiles need to be removed from the water and wiped off the surface moisture before they are fully immersed in water and before they can be laid.

2. Set the auxiliary line. Before starting to pave, it is necessary to hang the vertical line on the wall screed layer to determine the wall size line of the tile. Then set the horizontal line, so that you can ensure that the tile paving remains horizontal and vertical and the surface is flat.

3. Set up a supporting plank. When tiling tiles, it is necessary to set up wooden boards that can support the tiles with the horizontal line as the rope to prevent the tiles from displacing or falling before reaching the adhesive strength.

4. Pave in order. The paving of floor tiles starts from the door and window (or balcony) and proceeds from top to bottom, from left to right. The specific paving method is as follows:

First, use a water to moisten the screed, use a shovel to apply the mud and mortar (or other adhesive) to the back of the tile, then stick the tile to the wall, and then use the shovel handle or rubber hammer to tap the tile to fill the space between the wall and the tile.

5. Cleaning and maintenance. After the floor tile is paved, the stains and dust on the surface need to be cleaned in time, and here are some ways to clean and maintain them. It can be used when the surface contamination is more serious than that of ground potatoes, especially when it is stained with some stains that are difficult to remove.

Wipe with a 10% concentration of dilute hydrochloric acid solution.

The main points of the floor tiles.

1. Be sure to ensure the management before sticking to the floor tiles, because the exposed sewer pipe is very unsightly, and the sound will be very loud when the water comes out, so it is very important to ensure that this step is blind. Pipes can be wrapped with soundproof cotton and then bricks.

Build up, so that the isolation effect is very good.

2. If you are laying tiles for the bathroom, you should pay attention to the problem of waterproofing. Because the water absorption of the wall will be relatively poor after waterproofing, the waterproof wall needs to be reinforced with tile glue when making tiles, so as to avoid the phenomenon of falling bricks.

Because we know the importance of floor tiles when we put them, it is also important to learn how to pave them before decoration. The above is the method of sticking floor tiles and the precautions for sticking floor tiles introduced to you today, and this is the end of it.

1.Prepare tools and materials: floor tiles, tile adhesive, tile cutter, level, plumb line, rubber hammer, tile cutter, tile pliers, stool marker, broom, mop, etc.

2.Clean the ground: Clean the ground to ensure that the ground is flat, dry, and free of oil, dust and other debris.

3.Tie the line: Use the plumb line and the wire tapper to make the brick seam line on the ground, making sure the brick seam line is straight and vertical.

4.Gluing: Apply the tile glue evenly on the ground, be careful not to apply too thick or too thin, so as not to affect the pasting effect of the bricks.

5.Paste the tiles: Paste the tiles on the ground according to the brick seams, pay attention to the gap between the tiles to be consistent, and use a rubber hammer to gently tap the tiles to ensure that the tiles fit tightly with the ground.

6.Cutting tiles: If you need to cut tiles, you can use a tile cutter or tile cutter to do it, pay attention to safety.

7.Caulking: After all the tiles are pasted, use tile glue to fill the brick joints, and then clean them with a broom.

8.Finishing: After the tile glue is dry, clean the ground with a mop to ensure that the ground is dry and tidy.

Notes:1The tile adhesive should be applied evenly, not too thick or too thin.

2.The pasting of tiles should be carried out in accordance with the brick seam line, and the brick seam line should be kept straight and vertical. 3.

Pay attention to safety in the cutting of ceramic tiles to avoid hand injuries during cutting. 4.After the tile adhesive is dry, the ground should be cleaned in time to avoid the tile adhesive remaining on the ground.

The methods and techniques of sticking floor tiles are as follows:

1.Preparation: First of all, you must prepare the tools and materials you need, such as tiles, tile adhesive, tile fiber finger cutting machine, level, plumb line, rubber hammer, racket, etc.

2.Clean the floor: Clean the floor to make sure it is flat, dry, and free of oil and debris.

3.Layout: According to the size of the floor and the size of the tiles, determine how the tiles are laid out, which can be measured and marked using plumb lines and levels.

4.Cutting tiles: Use a tile cutter to cut the tiles to the desired size and shape as needed.

5.Gluing: Use tile adhesive to apply the ground evenly, and the thickness is generally 3-5 mm.

6.Tiling: Stick the tiles to the ground according to the predetermined layout, and gently tap the tiles with a rubber mace to make them fit tightly with the ground.

7.Brick joint treatment: Leave a brick joint between the tiles, generally 2-3 mm, and use a beat to fill the gap between the tiles.

8.Waiting for drying: Waiting for the tile adhesive to dry, it generally takes about 24 hours.

9.Brick joint treatment: After the tile adhesive is dry, use tile grout to fill the brick joint to make it more beautiful.

It should be noted that when pasting and destroying the floor tiles, it is necessary to pay attention to the flatness and levelness of the tiles to avoid the misalignment or unevenness of the tiles. At the same time, it is necessary to pay attention to the size of the brick joints between the tiles and the filling method to ensure that the gaps between the tiles are uniform and beautiful.

Here are the general methods and tips for sticking floor tiles:

Preparation: First, make sure the floor is flat, dry, and clean, and check that the floor has the capacity to hold weight. Depending on the need, a waterproof or insulating layer can be laid on the ground.

Planning and layout: According to the size and design requirements of the room, determine the layout and laying direction of the floor tiles. Use traction lines or tile vertical and horizontal lines for marking to ensure a neat arrangement of floor tiles.

Mix the mortar: According to the instructions on the mortar package, mix the water and mortar powder well until the appropriate viscosity is reached. Pay attention to the correct mortar ratio to ensure the cohesion and stability of the floor tiles.

Start the paving: Starting from one side of the room, use a brick laying knife or toothed knife to dip the appropriate amount of mortar and spread the chant evenly on the floor. Then, use a scraper or toothbrush to scrape out a certain ridge of mortar so that the floor tiles can adhere firmly.

Placement of floor tiles: Place the floor tiles one by one on the mortar and lay them according to the predetermined layout. Use a corrugated brush or rubber mace to gently tap the floor tiles to make sure they are level with the ground and adhere tightly.

Cut & Adjust: Use a tile cutting tool to adjust the floor tiles to the right size to fit the edges of the room or special areas as needed. Take care to wear personal protective equipment and cut in accordance with safe operating practices.

Cleaning and caulking: After the floor tiles are laid, use a damp cloth or sponge to clean the mortar residue on the surface of the floor tiles. After waiting for the mortar to dry, use a caulk filler to fill the gaps between the floor tiles to make the connection between the floor tiles stronger.

Curing and maintenance: Proper curing is carried out according to the drying time of the mortar and the instructions for use. Avoid premature exposure to water and heavy pressure to ensure the stability and quality of the floor tiles.

The methods and techniques of sticking floor tiles are as follows:

Prepare tools and materials: Floor tiles need to prepare tiles, tile adhesive, tile grout, level, plumb line, cutting machine, rubber hammer, clapper, wipe early Weizi and other tools and materials.

Clean the ground: Before tiling, you need to clean the ground to remove dust, oil and other debris.

Lay out the brick seam line: Use the plumb line and level, arrange the brick seam line to ensure that the width of the brick joint and the position of the brick are accurate.

Apply tile adhesive: Use a trowel to apply tile adhesive evenly to the floor, taking care not to apply too thick or too thin.

Tiling: Stick the tiles to the ground according to the position of the brick seams, and use a rubber hammer and clapper to compact the tiles to ensure that there is no gap between the tiles and the ground.

Cutting tiles: If you need to cut the tiles into specific shapes, you can use a cutter to cut them.

Caulking: After the tile is pasted, use tile grout to fill the brick joint to make the brick joint smooth and beautiful.

Wipe the floor: After caulking, wipe the floor with a damp cloth and wipe off any excess tile glue and tile grout.

It should be noted that when tiling, it is necessary to pay attention to the flatness and position accuracy of the tile, as well as the uniform application of tile adhesive and thickness control. At the same time, when Lu Bipei cuts tiles, he needs to pay attention to safety to avoid the cutter hurting people.

Here are some methods and tips for sticking floor tiles::

1.Surface Cleaning:The floor must be cleaned before laying the bricks to ensure that the bricks stick firmly to the ground. Use a broom, vacuum cleaner, or compressed air to clean the floor and make sure the surface is dry and clean.

2.Brick Planning:Before laying the bricks, use transparent ink or pencil to make a planning line on the ground for the bricks to be laid, so that the bricks can have a suitable positioning.

3.Brick cutting:If your floor needs to be cut with a lot of bricks, Liang Ming, the best friend, uses a special ceramic tile machine to operate it to ensure the accuracy and precision of brick cutting.

4.Leads & Seams:Before starting to lay the bricks, use leads and toner to create the necessary guide lines, while also leaving gaps in corners, door frames, etc., to cope with the inevitable structural deviations.

5.Gluing:Apply tile glue to the floor, using a spatula to evenly coat the glue and be careful not to apply it too thickly. The tiles need to be laid within 20 minutes when gluing.

6.Placing bricks:Once the tile adhesive has been applied, the bricks can be placed on the guide line and gently tapped with a rubber mac to ensure that the bricks fit snugly against the ground.

After completing a few bricks, be sure to use a spirit level for level calibration.

7.Keel axis slag quiet:If your room is large and you need to tile tiles in multiple directions, then you need to draw a keel-type axis on the ground first to ensure the levelness of the whole and part of the brick.

Notes:

1.Be sure to use waterproof tile adhesive to avoid water seepage problems.

2.Check whether the ground is flat before laying, if there is an uneven place, you need to reserve time for adjustment and level the ground.

3.Be sure to wear eye protection when cutting to prevent brick shards from hurting your eyes.

4.Before laying, it is necessary to fully understand the quality, color, size and other details of the tile.