What is the difference between the single wash and quick wash function of a fully automatic washing

1.Quick washing is low water level, less water consumption, short washing time, less rinsing times, and short dehydration time. From the point of view of time, the "quick washing" mode completes the full set of washing, rinsing and dehydration, which generally only takes more than ten minutes, and often only rinses once, which saves more than half of the time compared with the "standard washing" mode.

Then the quick wash is suitable for clothes that are not too dirty, laundry detergent.

To put little or even nothing, the machine performs a washing, rinsing and drying.

2.Washing alone means washing only the clothes and not spinning them out.

The automatic washing machine is to pre-set n programs for the whole process of laundry (soaking-washing-rinsing-spinning), select one of the programs when washing, turn on the faucet and start the washing machine switch, the whole process of laundry will be automatically completed, and the laundry will be completed.

Ringing by buzzer.

The automatic washing machine is controlled by the water level switch and the electromagnetic water inlet valve to control the water intake, drainage and motor on/off: so as to achieve automatic control. The solenoid water inlet valve plays the role of turning on and off the water source. When solenoid coils.

When the power is off, the moving iron core is tightly pressed against the rubber diaphragm under the action of gravity and spring force, and the small hole in the center of the diaphragm is blocked, so that the valve is closed and the water flow is blocked. When the solenoid coil is energized, the moving core moves up under the magnetic force, leaves the diaphragm, and makes the center hole of the diaphragm open, so that the water above the diaphragm flows into the laundry bucket through the center hole. Since the flow capacity of the central hole is greater than that of the holes on both sides of the diaphragm, the pressure above the diaphragm decreases rapidly, and the diaphragm will move up under the action of pressure difference, close the door and open it, and the water flow will be conducted.

Single washing, i.e. only the washing program is performed; Quick Wash, which performs the entire process, including washing, rinsing and dehydration, only consumes less time than the standard procedure in each sequence, resulting in a shorter total time.

In the case of a single wash, the washing machine stops after performing a single washing step and is not dehydrated.

This procedure is suitable for some fabrics that are inconvenient to dehydrate, so that the next step can be carried out manually, similar to that of a semi-automatic washing machine.

Wash quickly, and for some clothes that are not too dirty, you only need to wash them briefly.

Generally, the standard wash consists of 1 wash + dehydration + 2 rinsing (there is also dehydration in the middle of the second rinse) + 1 final dehydration (the time is relatively long to make the clothes drier).

In the case of quick washing, there is only one rinse, and the washing program consumes less time, so that the whole program time is shorter, and it is really a quick wash.

Semi-automatic a little cleaner.

The semi-automatic washing machine is composed of a washing bucket and a dehydration bucket, collectively referred to as a double-barrel washing machine, washing and dehydration can be carried out separately, but when washing, water inlet and drainage have to be completed manually, this washing machine has a high degree of cleanliness, low power consumption, and the washing and dehydration time can be arbitrarily selected.

1. The washing program is different: fast washing, the whole program is carried out, including washing, rinsing and dehydration, but the time consumed in each sequence is less than the standard program, and the total time is shorter. Mixed washing, consisting of 1 wash + dehydration + 2 rinsing + 1 final dehydration program.

2. The time taken is different: the time for washing clothes with the quick wash function generally only takes about 20 minutes. The time to wash clothes with the mixed wash function is generally about 50 minutes, which is relatively long.

Washing machine is a cleaning appliance that uses electrical energy to produce mechanical action to wash clothes, and is divided into two categories according to its rated washing capacity: household and collective.

Household washing machines are mainly composed of a box, a washing and dehydration bucket (some washing and dehydration buckets are separated), a transmission and control system, etc., and some are also equipped with a heating device. Washing machines generally refer to the use of water as the main cleaning liquid, as opposed to the use of special cleaning solutions, and the dry cleaning that is usually carried out by a dedicated person.

Basic structure. comprise plastic cylindrical inner cylinder and the outer cylinder of the drum made of metal having at least one drain opening, and the inner cylinder and the outer cylinder are adaptable. Described inner cylinder is made up of base, cylindrical inner cylinder and port ring, and one end of cylindrical inner cylinder is connected with base, and the other end is connected with port ring.

Described cylindrical inner cylinder is made up of 2 or more sidewall plates and 2 or more convex ridge plates are jointly formed with each other, described sidewall plate is the arc plate with four contour edges, and its four contour edges are connected with base, port ring and convex prismatic plate respectively, and are provided with connection structure, and a plurality of dewatering through holes are arranged on the plate.

The convex ridge plate is the arc plate with convex ridge in its middle, and its four contour edges are respectively connected with the base, the port ring and the side wall plate, and are provided with a connecting structure, and the plate is provided with a plurality of dewatering through holes; When the side wall plate and the ridge plate are connected with each other to form a cylindrical inner cylinder, the ridge on the rib plate protrudes into the cylinder and plays the role of lifting the rib plate.

The hybrid function of the washing machine refers to a washing mode that can put clothes of various fabrics together for washing, and the mixed washing mode can be used to clean clothes of different materials at the same time, such as cotton, wool and cotton linen, etc. In addition, the hybrid washing function can also actively adjust the speed, temperature and water consumption, so it will be more convenient to choose the hybrid washing function to clean clothes.

1. Mixed washing: cotton, chemical fiber, wool, and other types of clothes are mixed together to wash, and the washing machine will automatically adjust the speed, temperature, water volume, etc. 2. Single rinsing:

Simple rinsing, no detergent added, suitable for adding more detergent, after the completion of the program, the remaining foam is not rinsed clean. It is more water-efficient.

With the needs of modern people's life, the use of washing machines is becoming more and more comprehensive, with a series of functions such as standard, drying, fast, wool, down jacket and so on. Some programs will be very clean when washing clothes. Here are a few of the features:

01. Standard procedures.

The standard function is usually about 50 minutes to wash the clothes, but if in order to better clean the clothes, we can put the clothes into the washing machine to modulate the standard function, and then you can press a washing mode to wash it in about 1 hour and 20 minutes. <>

02. Soaking procedure.

It usually takes 1 hour and 20 minutes to soak and wash, and one of the disadvantages of this function is that it takes a little water, but it is understandable to wash the clothes. At the beginning of the washing machine, it is not washed immediately after filling with water, but there is a soaking process, the clothes are soaked to make the clothes fully integrated with the laundry detergent, and the dirt on the clothes will be soaked before washing, so that the washed clothes are clean and bright. <>

03. Wool and down jacket procedures.

Wool is mainly used to clean some slightly soft fabrics of clothes, such as woolen sweaters, cashmere sweaters and other clothing, cashmere sweaters and woolen sweaters themselves are delicate and soft, and do not need to be washed often, if the clothes are often washed, the clothes will be damaged, and if you wash for a long time, the wool will not be so soft and not warm, put the clothes in the washing machine, close the door and adjust to the wool function for about 40 minutes, press the power button, this function is relatively gentle. The function of the down jacket is to wash some fur collar without a fur collar or can be removed, put the down jacket into the bucket, and it will be cleaned in about 1 and a half hours, so that the cleaned down jacket is very clean and the down will not be damaged. <>

Introduce the above automatic washing machine to wash clothes cleaner several modes, you can operate according to the mode.

1.The concept is different, look at the literal meaning, a washing time is short, and normal washing must take a long time 2The purpose is different, wash quickly, indicating that the clothes are not very dirty, if you go to wash it quickly can be as clean as normal washing, then there is no need to wash normally.

3.The process is different, and in order to save time, the quick wash shortens the time of the washing program and at the same time reduces the number of rinses compared to the standard wash, which is the fundamental reason why it is more time-saving.

Fast washing shortens the time required for each process and reduces the number of rinsing sessions. It is generally used at about 20% of the normal wash.

Automatic washing machine fast washing means that the washing machine manufacturer is designed for washing programs that are only worn once or new clothes, mainly compared with other programs, characterized by low water level and less water consumption, because of the shorter washing time, so it is called "fast washing".

Quick wash mode for fully automatic washing machines:

1. The quick wash program is suitable for washing objects: clothes that are only worn once or need to be watered and have a low degree of dirt with a special smell.

2. Process: the same as the standard.

4. If there are many clothes, there may be unclean cleaning, that is, there will still be bubbles at the end of washing, it is recommended to use a small amount of laundry detergent.

Quick washing is a fast washing program designed by manufacturers for washing machines, which is mainly characterized by low water level, less water consumption, short washing time, less rinsing times, and short dehydration time compared with other programs.

From the point of view of time, the "quick washing" mode completes the full set of washing, rinsing and dehydration, which generally only takes more than ten minutes, and often only rinses once, which saves more than half of the time compared with the "standard washing" mode.

Here's how:

How to use a fully automatic washing machine?

1) Before washing, check whether there are matchsticks, hairpins or coins and other sundries in the washed clothes, and if so, take them out first;

2) Plug in the power, put down or connect the drain, turn on the tap and pour the laundry, laundry detergent and additives into the laundry.

inside the aircraft and close the canopy;

3) Press the power switch with your finger, and then select the water level according to the amount of laundry to be washed, and according to the dirty stroke and quality of the laundry.

materials and other specific conditions to choose a good program;

4) Press the start pause button and the washing machine starts working;

5) After the clothes are completely washed, the buzzer will beep;

6) After the work, turn off the power switch, pull the power plug out of the socket, turn off the tap of the water, then open the cover, take out the clothes, and dry the washing machine.

Automatic washing machine fast washing means that the washing machine manufacturer is designed for washing programs that are only worn once or new clothes, mainly compared with other programs, characterized by low water level and less water consumption, because of the shorter washing time, so it is called "fast washing".

Quick wash in a fully automatic washing machine is a washing procedure characterized by short time, low amount of water, and weak washing intensity. Typically, the quick wash procedure takes between 15-30 minutes and is suitable for light stains or washable garments.

Due to the low amount of water and the short time, the quick wash program is relatively water-efficient and can also complete the laundry task faster.

Quick washing means that it takes less time. The number of times it is eaten is small, and the water level is relatively low. Quick wash is more suitable for clothes with a small number of clothes and are not dirty. Quick washing can save both electricity and water.

Quick wash is literal, and the laundry process is faster.

The quick wash program is a process such as washing, rinsing, etc., and the time automatically set by the machine will be shortened.

The washing machine is a major feature of the washing machine, the washing time is only a few minutes, and the fast wash is mainly for new clothes that are not dirty or just bought. However, it should be noted that the amount of clothes that can be accommodated by the quick wash is 1 2 of the capacity of the washing machine, and it should not be too much, otherwise the cleaning effect will be affected.

Quick wash and standard wash in the washing machine are two different washing programs, which can be used according to the washing needs and time. They differ in the following ways:

1.Washing time.

Standard washes take longer (usually more than an hour) to ensure thorough and deep washing of the laundry. A quick wash, on the other hand, usually takes only half an hour or less to complete.

2.Cleaning effect.

Because standard washes last longer, they often provide better cleaning results because they ensure that the laundry is washed more deeply and thoroughly. Quick wash, on the other hand, only completes a short period of washing, and may not be as effective as a standard wash.

3.Type of clothing.

Quick wash is suitable for lighter washing tasks, such as daily light wear or already relatively clean clothing. Standard washes are usually used when deep cleaning is required, such as dirty, oily or stained clothing.

4.Save water and electricity.

Since quick washes take less time, water and electricity can often be saved. So, if you're washing clothes that aren't too dirty, or just for some light washing tasks, using a quick wash can save you more time, water, and electricity.

Although these programs are different, washing machines will usually offer a choice of multiple levels and multiple cleaning programs, which can be selective according to different washing needs and times.

1. The speed of the motor is different: standard washing means that the washing machine washes the clothes through the rated speed, and fast washing should increase the speed of the washing machine motor to speed up the washing speed;

2. The washing time is different: the standard washing takes about 45 minutes, while the whole process of quick washing is mostly no more than 20 minutes;

3. The number of rinsing is different: the standard wash is generally washed once and rinsed twice, while the fast wash is only rinsed once, but the speed of the fast wash is high, so when washing clothes quickly, pay attention to whether the clothes can resist high washing intensity.

Common sense and precautions for the use of washing machines.

1. Before washing, you should carefully check the label on the clothes to see if they can be washed, ironed, etc., and choose the corresponding washing program according to the texture of the clothes, such as cotton, chemical fiber, wool, etc.

2. Sort the clothes according to color and wash them separately to see if they fade to avoid other clothes from being contaminated.

3. The drying capacity of the washer-dryer is half of the washing capacity, so it is necessary to pay attention not to place too many clothes when drying to avoid wrinkles after drying.

4. When the washing or rinsing program is selected, the roller will not run if the selected water level is not reached.

5. During the dehydration procedure, the cover must be closed, and the cover should not be opened from time to time.

6. Never touch the washing and dehydration bucket with your hands, so as not to get your hands involved and cause danger.

7. Do not wash or dehydrate clothes containing volatile substances (solvents, alcohol, etc.) to avoid accidents.

8. When the dehydration is unbalanced, the computerized automatic washing machine can be corrected for dehydration imbalance, if the imbalance problem is not solved after 2 times, it will stop and alarm, at this time, the cover should be opened, the clothes that are squeezed on the side should be placed evenly, and then the cover should be closed, and the start pause button can be pressed.

9. When using hot water for washing, do not use more than 50 hot water, and pay attention to the fact that the water can not splash the control board, so as to avoid the internal electrical parts from being burned due to water.

10. Before washing, check whether there are matchsticks, hairpins or coins and other sundries in the washed clothes, and if so, take them all out.

11. When the temperature is very low, the washing machine is easy to freeze, at this time, warm water below 50 should be poured into and soaked for a period of time, and then used after thawing.

12. When the water temperature is low, the laundry detergent is not easy to dissolve, at this time, it is necessary to dissolve it with a small amount of warm water (about 30) and then pour it into the washing machine.

13. After the washing machine is used up, it is best to open the glass window of the washing machine a little, which can prolong the service life of the sealing ring and facilitate the moisture dissipation in the machine.

14. The drum washing machine must use a laundry detergent with low foaming and high detergency, and it is best to heat and wash dirty clothes.