What are the precautions for carpentry decoration, and precautions for home improvement carpentry

Autumn is always considered to be the best time to decorate.

The season, it is true that the dryness of autumn is not as rainy and humid as summer, nor the cold of winter, but there are certain precautions for carpentry decoration in autumn

Autumn carpentry decoration precautions:

Precautions for carpentry decoration in autumn: 1. Pay attention to drying and cracking of wood

In the dry autumn, it should be noted that the drying of the wood leads to cracking and other situations, so the autumn decoration of various boards.

Do not put the product in the vent after entering the site, should be done on the surface as soon as possible to seal the oil to prevent cracks due to air drying, in addition to pay attention to avoid direct sunlight, but also can put a basin of water indoors, in order to maintain a certain humidity, in order to prevent the wood from drying, cracking or deformation, image decoration appearance.

Precautions for carpentry decoration in autumn: 2. Pay attention to fire prevention in wood

In addition to paying attention to the drying and cracking of the board, the wood is easy to burn, and the dry autumn indoor must be eliminated from open flames, such as smoking, cooking, etc., the other party's wood products and other wood products should be treated in advance and sprayed with fireproof coatings.

Stay safe. Precautions for carpentry decoration in autumn: 3. Pay attention to environmental protection in wood

Many people think that there will not be too much decoration temperature in the decoration room in autumn, but in fact, this should be more vigilant, which is often an illusion caused by low temperatures. Everyone knows that one of the formaldehyde in the home is wood and board furniture for decoration.

And so on, inferior boards will cause serious indoor pollution, which has great harm to human health, but the autumn decoration temperature is low, and these smells are easy not to smell, so in the autumn woodworking decoration boards, furniture, etc., we should pay more attention to environmental protection issues, and at the same time open the windows and doors appropriately.

Ventilation. Autumn is people's favorite decoration season, but autumn decoration in the precautions are also more, autumn carpentry decoration should pay more attention to the board of anti-drying, fire prevention, environmental protection and other issues. The precautions for carpentry decoration in autumn are introduced here, I hope it will be helpful to everyone.

The materials must be genuine, can not be shoddy, strictly according to the budget, drawings implementation, furniture, wooden doors, baseboards, ceilings, floors have strict operating standards, do not discount. In the precautions for decoration carpentry, we must remember that we must not use less, and do not cut corners. The materials of No. 1 Home Furnishing Network are all well-known brands, and the decoration is also very good.

House renovation is a tedious process, and there are all kinds of problems that we need to pay attention to. Carpentry is an important part of home decoration, it is related to the decoration of each space, such as: cabinets, doors, wardrobes, doors and windows, ceilings, TV cabinets, etc. are very important.

So, let's share the precautions for home improvement carpentry.

1. Precautions for home improvement carpentry.

1. Preliminary preparation.

1) When decorating, we will do some decoration and lockers on the wall and ground, which will be made of wood, at this time, we must ensure that the decoration of wood products is on the same horizontal line, and we must measure before starting construction, and then play ink to ensure that wood products are on the same level.

2) After the horizontal line is confirmed, the vertical direction error should be controlled, and the error should be within the specified range to ensure that there is no problem in the vertical direction of the wood products.

2. Detailed size.

When it comes to carpentry, it's important to have a clear set of dimensions and explanatory drawings. If the drawings are not good, the regular decoration company will let the designer give the carpenter a serious explanation to ensure the effect after the decoration.

3. Material selection. 1) In addition to measurement, the material selection stage is also very important. Whether it is a wardrobe or a shoe cabinet, the door needs to be made of the same sheet to ensure that the pattern and color are consistent.

After the processing of wood products is completed, it is also necessary to brush white glue on the surface, so that the surface is not prone to arching and cracking.

2) We need to brush the waterproof coating on the base plate and carry out the baseboard construction from the ground.

3. Other transformations.

1) When making the background wall, the wooden keel needs to be laid well, and the gypsum board can be put on it after it is firm, and the gap between the gypsum board and the gypsum board needs to be reserved to avoid the phenomenon of expansion and arching in the future.

2) The amount of carpentry work is still quite large during the decoration, and the veneer construction of the door sleeve and wood products is the place where you can see how the carpentry master is skilled to ensure that the veneer is flat at a 45-degree angle. After the frame is formed, the master should use sandpaper to polish it to ensure that the surface of the door sleeve is smooth and bright, and then carry out veneer construction.

Article summary: The above is the relevant content of the precautions for home improvement carpentry shared with you, I hope it will be helpful to you. Carpentry decoration is the focus of the whole home decoration, so we should pay attention to it when decorating.

Be sure to remember the points you need to keep in mind to avoid making mistakes.

1) There should be a 3 mm gap between the gypsum board and the wall to facilitate anti-crack treatment.

2) The position of the outer corner of the gypsum board should be protected by the outer corner strip.

3) The wooden door should be painted in the rising and descending positions.

4) Cabinets are generally recommended to be purchased in full, and the design and construction of carpentry may not achieve good results.

5) Before use, it is recommended to saw a large area to air-dry the planks.

6) After the carpenter enters the site, first lay the degree line of the house mold draft.

7) When the length of the composite floor slab exceeds 8 meters, the extension of this round of shrinkage joints should be considered.

8) Try not to use MDF as a Mensen code envelope.

9) Hinges and hardware need to choose relatively good products.

10) The bottom of the bathroom door cover needs to be re-brushed with waterproof paint.

11) The door size should be kept the same in each room.

12) The rough floor should be paved at 30 or 45 degrees, and the gap between the floors should be about 3 mm, and the gap should be staggered.

Carpentry is an indispensable part of our decoration process, the quality of construction is directly affected by the overall quality of decoration, so before construction, you may wish to follow me to understand some precautions, which can also help you complete the project efficiently.

1) Wooden keels are best dried with larch. After the large wooden planks are bought, the tomb will be sawn and dried; As soon as the color panel comes in, you have to buy paint and brush it again to prevent it from being stained; The flatness of the wooden keel of the floor is 5mm; The raw floor should be paved at 30 ° or 45 °, leaving 2 3mm between the boards and the boards, and the seams should be staggered; Leave 8 10mm gaps between the floor and the wall; Expansion joints should be considered when the length of the laminate floor is more than 8m.

2) Treatment and design of door panels. The upper and lower heads of the wooden door should be painted; The bottom of the bathroom door cover should be brushed to waterproof; The size of the door should be the same; Don't make a dark track for a sliding door that you do; If the bathroom is small, try to do a sliding door, don't open the door and take up space; If you can't eat the carpentry work, you must communicate more with the foreman, and you must not let them make their own decisions; Try to use MDF as little as possible for door casings.

3) Treatment of gypsum board. The gypsum board should be fixed with countersunk self-tapping screws, enter the board surface 1 2mm, and do anti-rust treatment, not with gun nails; The distance between the gypsum board and the nail shall not be greater than 200mm; The gypsum board should have a 3mm joint with the wall to prevent cracking; It is best to make a sunny corner strip at the sunny corner of gypsum board to protect it.

4) Key points of the construction of the ceiling. Ceiling fans cannot be mounted on the ceiling keel; The color panel should be pre-selected during construction; The distance between the hanging bars of the ceiling and the wall shall not be greater than 300mm.

5) The structure should be straight. Regardless of whether it is horizontal or vertical, proper carpentry practice should be kept straight. The corner line of the ceiling should be smooth, and there should be no obvious wrong lines and deformations.

The baseboard should be installed straight and accurate from the ground. (6) The parquet should be strict and accurate. The correct wood parquet should be seamless or maintain a uniform separation distance between them.

Whether the arc and roundness are smooth and smooth, multiple identical shapes must also ensure consistency.

7) The cabinet and door switches should be normal. Whether the installation position of the cabinet door handle lock is correct and whether the opening posture is normal. When the cabinet door is opened, it should be operated lightly and without abnormal sound. There should generally be no gaps in the fixed cabinet wall.

8) The door and window frames should be corrected before installation. Add a nail pull bar to avoid deformation. When installing door and window frames, there shall be no less than two fixed points on each side, and their spacing shall not be greater than.

9) The distance between the boom and the main keel. The distance between the boom and the main keel shall not be greater than 300mm, when it is greater than 300mm, the boom should be increased, and when the length of the boom is greater than, the counter-support should be set.

10) Paving of floors. The moisture content of all keels, skids and other materials of the floor, as well as anti-corrosion and anti-moth treatments should meet the requirements, and the base layer should be treated with moisture before paving. When laminate flooring is paved, pay attention to moisture-proof, the joints should not be stacked, the first row should be installed with grooves against the wall, and when the length or width of the room exceeds 8m, expansion joints should be set at appropriate positions.

1. The size of the main related finished product. In woodworking, drawings with detailed dimensions and descriptions are important. But the drawings alone are not enough, the standard company will be explained in detail by the designer to the carpenter when the disclosure is made, so as to ensure good results.

2. The panel determines the appearance of the furniture, so the procurement principle is the same as above, and the number of appearance panels accounts for 30%, the more expensive the better! After all, it's for your own use, and bloodletting is necessary.

3. The wood is sturdy, the stability of the jujube chain is carefully checked to ensure safety. The problem that carpentry construction is prone to is the problem of stability, which is also the problem of the stool, the connection between the door sleeve and the wall is not stable, and the installation of the cabinet is not firm, etc., which will affect the use of the house.

The above is an introduction to what are the precautions for interior decoration carpentry, I hope it will help you.