How to make the decorated wall waterproof or moisture proof treatment?

Yes Your façade isn't done. It is possible to leak water in the rain, so it is best to make it waterproof, and add a moisture-proof mat to the wall of the wardrobe, which is the kind of wooden floor.

Moisture-proof should start from the selection of materials, there are many materials for wallpaper on the market, non-woven fabrics, wood fibers, PVC, glass fiber substrates, cloth surfaces, etc., relatively speaking, PVC wallpaper is the most breathable, and it is easiest to exhaust the water vapor from the wall in it, and it is easy to form mildew spots after a long time.

After the decoration is completed, the wall must be kept dry, and the new cement construction generally needs to be maintained for 20 to 40 days before the wallpaper can be paved. It is worth noting that when decorating, care should be taken not to let the non-standard construction mix the sea sand that is not suitable for wall painting. Sea sand has a high salt content, which can easily absorb water and bury "water hazards" for the wall in the later stage.

As for the wallpaper, there are generally various patterns, and when paving, you must pay attention to whether there is a large gap between the two wallpapers, and whether the parquet is aligned.

In addition, watering will wet the wallpaper during paving, and there will be a certain shrinkage after drying, so it is necessary to leave a good telescopic position. Try not to open the shrinkage joints of the wall to the windward. Proper maintenance can prolong the life of the wallpaper and enhance the moisture-proof function.

Do not open windows and doors during and within 24 hours after the end of construction. Excessive ventilation will cause the wallpaper to dry sharply and shrink unevenly, causing cracks in the joints. After 3 days of paving, pay attention to adjusting the ventilation.

Doors and windows should be opened during the day to maintain ventilation; Doors and windows should be closed at night to prevent moisture from entering, which will affect the firmness of the paste.

Before renovating, waterproofing and moisture protection is necessary, especially in special spaces such as bathrooms, kitchens, and wet areas. Here are some ways to keep your walls waterproof and moisture-proof:

1.Moisture-proof materials: select materials with better moisture-proof performance, such as moisture-proof gypsum board, moisture-proof log board, etc.

2.Wall treatment: Cut a horizontal groove inside the wall, and then bury pipes and other aqueduct materials in the groove to exhaust the moisture inside the wall.

3.Coating treatment: choose coatings with moisture-proof and waterproof functions, such as silicate waterproof coatings, latex paints, etc.

4.Waterproof coatings: Waterproof coatings can be used in special spaces such as bathrooms and kitchens. Apply a layer on the walls and on the ground, leaving an overlap of 20 to 30 cm, while sealing it with the drain of the sewer.

5.Water retaining strip installation: When the floor drain, drainage outlet and other areas in the bathroom, kitchen and other areas, install water retaining strips to avoid moisture from penetrating into the wall, so as to prevent moisture.

In short, in the waterproof and moisture-proof wall surface, it is not only necessary to pay attention to the selection of materials, coatings, coatings and other treatments, but also to fully plan before construction to reduce structural gaps and air loopholes. In this way, we can avoid the growth of moisture, prolong the service life of the wall, and protect the safety of the entire house structure.

The wall is waterproof and moisture-proof, which is an indispensable part of the home decoration process, especially in humid places, such as Luliang bathroom, kitchen, etc., there will also be moisture infiltrating into the wall, resulting in mold and corrosion of the wall, thereby affecting the indoor air quality and living experience.

Here are some ways to keep your walls waterproof and moisture-proof:

1.Choose materials with good air permeability: Choose materials with good air permeability for wall decoration, which can not only ensure that the wall is not wet, but also allow the moisture in the wall to be released.

2.Brush cement cover agent: During construction, apply a layer of cement cover agent on the wall to seal the gypsum layer and marl layer on the wall to prevent water leakage and penetration on the wall.

3.Waterproof wall surface: After the wall decoration is completed, brush a layer of waterproof paint to enhance the waterproof and moisture-proof ability of the wall, and at the same time, the finger hole can also play a role in beautifying the wall.

4.Install a breathable and moisturizing layer: Stick the breathable and moisturizing layer on the wall, it can achieve multiple effects such as moisture insulation, breathability, heat insulation, sound insulation, and heat preservation, so that the indoor air can be kept moist and not prone to dryness, itching and other problems.

5.Install moisture-proof mats: Installing moisture-proof mats on the ground or in the corners of walls can play a role in intercepting moisture and reducing the possibility of moisture on the wall.

In short, the waterproof and moisture-proof wall is very important when decorating, which can ensure the health of family members and the quality of the indoor environment. Therefore, before decoration, it is necessary to take corresponding waterproof and moisture-proof measures for different walls and rooms to ensure the quality of decoration and the comfort and health of the dry environment in Juwei Town.

When decorating the wall, waterproof and moisture-proof is a very important job, especially in the kitchen, bathroom and other areas with high humidity. Let's introduce some ways to decorate the wall to be waterproof and moisture-proof.

1.Choose the right material.

When decorating the wall, you should choose materials suitable for waterproof and moisture-proof, such as moisture-proof boards, waterproof coatings, waterproof glue, etc., which can bring good waterproof and moisture-proof effects.

2.Treat the wall.

Before installing the wall, the wall should be treated first to ensure that the wall is dry, flat, free of foreign matter, and free of local cracking, so as to ensure the waterproof and moisture-proof effect of the wall.

3.Pay attention to crevice treatment.

When decorating the wall, it is necessary to pay attention to the treatment of the gaps, and the gaps between the wall and other areas should be clean and dense, so that the wall can achieve a better waterproof and moisture-proof effect.

4.Use waterproof paints.

After the wall decoration is completed, use waterproof paint to paint, which can effectively isolate moisture and prevent the wall from getting wet.

5.Treatment of drainage pipes.

When installing drainage pipes, the drainage slope should be set to avoid water seepage and wetting on the wall due to unsmooth water.

In short, when decorating the wall, the waterproof and moisture-proof work is particularly important, and it is necessary to do a good job of waterproof and moisture-proof stove tide plan in advance, choose suitable materials, pay attention to the treatment of wall gaps, and reasonably deal with drainage, so as to ensure the waterproof and moisture-proof effect of the wall, and make the wall more beautiful and durable.

When decorating a house, wall waterproofing is a very important part, which can effectively prevent the appearance of moisture, mildew, rot and other problems on the wall, and ensure the safety and health of the house. Here are a few ways to waterproofing your walls:

1.Use waterproof paints: There are many kinds of waterproof paints on the market, and you can choose different paints according to the different materials of the wall. The use of waterproof paint can effectively prevent the wall from absorbing water and preventing moisture from penetrating into the wall.

2.Construction waterproof layer: For the serious water leakage problem of the wall, the waterproof layer needs to be constructed, and materials such as polyurethane to brighten ester, acrylic and epoxy resin can be selected for coating treatment, which can achieve a better waterproof effect.

3.Install laminated moisture-proof film: Before wall decoration, paste layer by layer of laminated moisture-proof film on the wall. Laminated moisture-proof film can isolate the penetration of moisture and achieve the effect of waterproofing.

4.Use waterproof glue: Before laying tiles or other decoration materials, you can use waterproof glue to apply the wall to prevent moisture from penetrating.

5.Installation of rainwater pipes: For the situation that rainwater often flows directly on the wall and causes water seepage, rainwater pipes can be installed to discharge rainwater in time.

Through the above methods, the wall can effectively prevent water seepage and dampness, it is recommended to carefully consider and choose your own waterproof treatment plan before decoration to avoid problems. At the same time, it is also necessary to pay attention to the details of the construction to ensure that the waterproof effect is more stable and pure.

In interior decoration, wall waterproofing is a very important link. If the waterproofing treatment is not carried out, the wall is susceptible to problems such as dampness and mold, which will not only affect the comfort of the indoor environment, but also cause damage to the structure of the house. The following is an introduction to some commonly used methods for wall waterproofing.

1.Choose the right paint: In the choice of paint, be sure to choose the paint that is suitable for the waterproof treatment of the wall. It is generally recommended to use environmentally friendly waterproof coatings, which can form a water-resistant film to prevent moisture from penetrating into the wall and have a good waterproof effect.

2.Use waterproof adhesive: For concrete walls and dry-hung stone and other walls with rough surfaces, waterproof adhesive can be used for treatment.

Waterproof adhesive has a wide range of applications, whether it is in the cement base plate, or in the basement, toilet and other locations can be used, which greatly improves the waterproof effect of the indoor wall.

3.Use waterproofing membrane: The use of waterproofing membrane is very common, it can be laid on the surface of gypsum board, cement board, steel keel or wood board, etc., which can achieve a real sense of wall waterproofing.

4.Cement mortar: If the details are not in place during the construction of the wall, some small holes will be formed, which will easily cause moisture penetration and lead to mold on the wall. At this time, you can use the mud mortar of the water hall to treat the wall and seal the wall.

5.Use of wall waterproofing materials: wall waterproofing materials are widely used in wall waterproofing treatment, which can effectively resist the penetration of moisture and avoid the damage effect of moisture to the wall.

In the renovation process, wall waterproofing is an essential job. Only by carrying out effective waterproofing treatment can we avoid some unnecessary problems caused by water penetration in the later stage.

Renovation is a very time-consuming and labor-intensive thing, and it involves a lot of complex processes, and if you don't pay attention, it is easy to have problems. One of them is the dampness of the wall, which is very detrimental to the hygiene of the home and the preservation of decorations. Therefore, we need to treat the wall with moisture to prevent the humid environment from causing adverse effects on the interior.

1.Choose a flame-proof searcher tide material.

First of all, it is very important to choose a moisture-resistant material. When decorating, you can choose waterproof and moisture-proof coatings and materials, such as common latex paint, PVC board, ceramic tiles, etc. These materials keep moisture out and won't be absorbed by the walls and cause moisture to leak.

It should be noted that the use of such materials should pay attention to quality assurance to avoid poor quality and aggravation of moisture.

2.Moisture-proof treatment on the wall.

Secondly, the wall needs to be treated with moisture. For the walls of old houses, in addition to the use of moisture-proof materials, the walls should be comprehensively repaired and dehumidified. If you need to use soft materials such as wallpaper, you can brush the moisture-proof agent on the wall for pretreatment to enhance the ability to adsorb the wall and prevent the wallpaper from being deformed or moldy due to moisture.

3.Pay attention to ventilation.

And one more important point: enhanced ventilation. In the wet season or in a damp house, the accumulation of clothes and other items for a period of time can make the walls damp.

Opening windows for ventilation in time can drain the indoor moisture and avoid damage to the home caused by the humid environment. At the same time, on sunny days, open windows or internal ventilation layers to let sunlight shine directly on the walls to achieve the effect of dehumidification.

In general, it is very important to protect the walls from moisture after decoration, as the impact of a humid environment can be wide-ranging, not only affecting the hygiene of the home, but also the health of you and your family. Therefore, we must pay attention to this problem before decoration, choose moisture-proof materials as much as possible, pay attention to wall treatment, and ensure good ventilation to avoid the formation of a humid environment.

Renovation of a new home is very important to protect against moisture, especially in the humid season, which is a problem that most people are afraid of. If you don't deal with the moisture-proof problem, it may dry up and cause various health hazards. To do a good job in the decoration of the new house moisture-proof, you can choose the method that suits the room, and moisture-proof is also a basic skill that is worth investing in.

Here are some tips for protecting against moisture.

1.wall treatment.

When building a house, install waterproof materials on the walls of the basement, and some people can also apply moisture-proof paint on the new walls to ensure that the moisture on the walls stays inside the walls. This effectively prevents the humid air from the basement and downstairs from penetrating into the rooms upstairs. For basements, choosing polypropylene film to lay on a new concrete wall can be very effective in keeping out moisture.

2.Ventilation circulation.

Keeping the room well ventilated allows air to flow and prevents moist air from accumulating in the room. Installing a good ventilation system will allow moisture to escape from the room and keep the room dry. It is very necessary to open the windows regularly for ventilation after the renovation of the new house, especially in the wet season or humid weather.

3.Humidity control.

Humidity control is a completely necessary method to ensure that the air in the room is dry. When renovating a new house, Shouqing can install a hygrometer to measure the humidity in the room to keep the humidity in the room within a proper range. After some home renovations, additional dehumidifiers or humidifiers can be installed to adjust the humidity as needed.

4.Moisture absorbents.

Moisture absorbers can help prevent moisture. This is a special product that absorbs moisture from moist air and helps maintain humidity in the room. Moisture absorbers can be used in living rooms, bedrooms, kitchens, and any other places that need to be protected from moisture.

When choosing a moisture absorbent, it is necessary to choose the appropriate product according to the user's needs.

In short, it is very important to prevent moisture in the decoration of new houses, and ensure that the humidity in the room is not too high to ensure the health of the occupants and the longevity of the furniture. It is recommended that the owner install various moisture-proof materials and equipment during the renovation of the house, especially in the basement and damp rooms, which is very necessary.