How to set up the function of the relay in Pinsheng Relay Treasure?

1. Connect to Pinsheng Relay Treasure first, and set the IP address of the machine.

x can be any number in 2 253) to subnet mask.

Set to OK.

2. Open the browser, enter and press enter to open the advanced settings menu of Pinsheng Relay Treasure.

3. There are three modes in the relay settings, set the relay mode, connect the SSID and password.

4. After entering the page, set up automatic connection and expand the known zhidao wireless network.

After that, the SSID and encryption method are the same as those of the original network, which proves that the relay has been successful.

5. Then put the wireless network card.

The IP address is then set to be automatically obtained, and finally saved.

Hello, glad to answer for you.

Wireless Relay Treasure (

Here's how to set up your phone:

1、Relay treasure plugged in the power supply for a few seconds,WiFi indicator light is always on,At this time, enter the mobile phone wifi settings,Search for the wifi signal of the relay treasure,Enter the advanced setting options,Select static mode under the signal,Enter IP:Any number between 2-253),Enter the subnet mask:,As shown below:

After the input is completed, enter the network signal and enter the default password "00000000";

2、After connecting to the relay treasure wifi signal,Please enter in the browser:,Enter the "Advanced settings" interface,Select the basic settings"Relay settings",Then click the "Search AP" at the top right of the interface,Select the last routing signal you need to extend (trunk);

3、Check the "relay mode(ap+client)" in the mode selection at the bottom of the interface,At this time, the name of the relay treasure will show the upper route name,Then please enter the password of your upper route signal,As shown below:

After entering, click on the "Application" in the lower right corner, wait for a few seconds, the relay indicator on the relay treasure shows a solid on, that is, it has been connected successfully, and you can exit the settings interface to surf the Internet freely.

If the above does not answer your question, please know to the company to continue to ask questions.

Dear, hello, I'm glad to answer for you, Pinsheng Relay Treasure setting method Pinsheng Relay Treasure configuration function introduction At present, most of the routers are quite simple to configure, it can be said that it is a fool's operation mode, Pinsheng extenders are not excluded, and network bridging is also achieved through IP matching. Let's take a look at the author found a Mac book to try,First of all, your router should be connected to the extender first,Then search for relevant wifi through the notebook to achieve connection,It is worth our attention that the author found that if the router at home does not support WPS one-click configuration function,Then you may need to trouble a little by manually matching the IP address and other operations,After the connection to the wireless is successful, we need to manually set the IP address as,(X can be 2 253) subnet mask setting, then we can enter in the browser and press enter to enter the advanced settings menu of Pinsheng Wireless Relay Treasure. After entering the page, we can set relevant functions through the function page on the home page, such as viewing the network status and firmware version and other information.

In addition, the relay treasure will also automatically connect and expand the known wireless network, its SSID and encryption method are the same as the original network, which proves that the relay has been successful. Set the IP address of the wireless network card to be obtained automatically and you can easily surf. There are three modes for us to choose from in the trunk settings, which may be incorrectly selected by users, such as selecting AP mode, which may not be able to connect to the network.

Relay treasure also supports the wireless network to believe in the SSID of the god and the wireless network in the SSID of the relay signal to modify,In addition, the channel and encryption method can also be manually modified,It can meet the different needs of users,Greatly deepen the user experience。 MAC physical binding is also a good way to prevent the network from being rubbed by others at any time,Pinsheng Relay Treasure also supports device MAC address binding,Users only need to spell the MAC address of the device into it。 In addition, the relay treasure supports the management of the administrator's password setting,At the same time, the router can be upgraded through the relay treasure,Functionally speaking, it can fully meet the needs of Tongchun households。

Summary: Simple operation, powerful functions and encryption algorithms, in terms of functions, can fully meet the needs of general home users and small users.

The steps of Pinsheng wireless relay treasure with mobile phone settings are as follows:

1. After a few seconds of plugging in the power supply, the wireless indicator light will be on, and the wireless setting of the mobile phone will be entered at this time;

3. Select static mode under the signal and enter the address;

4. After connecting the wireless signal of Relay Treasure, enter the "Advanced Settings" interface in the browser;

6. Select the previous routing signal that needs to be extended Pinsheng Relay Treasure;

7、Check the "relay mode" in the mode selection at the bottom of the interface,At this time, the name of the relay treasure will display the upper route name,Then enter the password of the upper route signal;

8、After input,Click on the lower right corner"Application",The relay indicator on the relay treasure shows a long on,It means that it has been connected successfully,You can exit the setting interface to surf the Internet freely。

How to use wireless repeater (Pinsheng Relay Treasure):

1. Find the first route (information source).

2. Copy the SSID of the first route.

3. Set the access mode of the second route to the first route.

4. Set the first and second routes to access the IP segment.

5. Create a virtual access point on the second route for other devices to access the second route.

6. The WAN status shows that the first routing assignment address is the trunk success.

In the network, the wireless repeater can be simply said in a narrow sense of the wireless that is, the abbreviation of access point (wireless access node), which is equivalent to the hub or switch in the wired network, however, this is a hub with wireless signal transmission function, which can provide a dialogue meeting point for multiple wireless Internet devices.