How to set up the wifi repeater and how to connect the repeater to the wifi?

To become a relay station of a wireless router, you need to turn on the relay mode of the router, here is an example of a NEWIFI router to illustrate, the specific steps are as follows:

1. Log in to the router background management page and click on the background management page"Route settings"。

2. After entering the router settings page, click on it"Advanced features"Options.

3. Select it on the router's advanced features page"Wireless relay"Function.

4. Turn on the wireless relay mode switch of the router, then the router will scan the surrounding wireless networks, and you need to select a wireless network that needs to be relayed.

5. If the wireless network of the relay is encrypted, you need to enter the password, and click it after password verification"Join"You can relay the signal.

Wireless wifi repeater installation and use tutorial (small steamed bun).

Outdoor wifi wireless repeater usage tutorial.

After the repeater is connected to the power supply and works normally, it will transmit a wireless signal, which is connected by the computer or mobile phone, and enter the setting IP of the repeater in the browser of the mobile phone or computer to enter the setting interface of the repeater.

1. First of all, enter "Log in to the router" in the browser, enter the login password to enter, as shown in the figure below, and then enter the next step.

2. Secondly, after completing the above steps, in the settings interface, select the "Advanced Settings" option as shown in the image below, and then proceed to the next step.

3. Then, after completing the above steps, select the "Wireless Expansion" option as shown in the image below and proceed to the next step.

4. Then, after completing the above steps, select the "Open" option as shown in the image below and proceed to the next step.

6. Then, after completing the above steps, in the window of the scan result, find the extended network, and click the "Connect" button as shown in the image below, and then enter the next step.

7. Then, after completing the above steps, enter the password of the connected wireless network, and then click the "Save" button, the router will access the extended network as shown in the image below, and then proceed to the next step.

8. Finally, after completing the above steps, set the WiFi name and password of the router to realize the function of the WiFi repeater, as shown in the figure below. In this way, the problem is solved.

Answer Pro1, connect to the router, computer or wireless device through wireless connection to the router. The router's wifi name (network name) and wifi password (network key) are written on the router sticker, note that the key has letters that are capitalized (factory letters are capitalized by default).

2. Enter the settings interface of the router.

Once the hardware is connected, open the browser and type:

3. After clicking "OK" after popping up this page, enter the router's settings interface, as shown below

4. Set up the router relay and click the installation wizard to set it up.

5. Click Next.

6. Click Next.

7, Select the WiFi relay mode and click Next.

8, You can change it to your favorite wifi name and password, click next after modifying.

9, Click Scan.

10. After scanning the wifi name of the main router, click the small circle on the left, then enter the wifi password of the main router, and click next after entering the password.

11. Check if there is a problem with the summary of settings information, and finally click Save Apply.

12, The following page appears after saving the app.

After the above settings are completed, the wireless router becomes a secondary router and relays the signal from the primary router.

1. Name the router in the computer room Router A, the router in the living room as Router B, and Router B as the TP-Link router, first check the IP address of Router B (see the manual or the label on the back of the router), if the IP address of the router is the same, you need to modify the IP of one of the routers, I modify the IP of Router A as an example.

2. Enter "Router A's IP" in the browser address bar of your mobile phone), enter your account password to log in, and click "Network Parameters" - "LAN Port Settings".

3. Change the IP address of the router to ", and then save and exit;

4. If the IP addresses of the routers are not the same, you can skip the above steps. Connect to Router B, enter "Router B's IP" in the browser address bar of your mobile phone to enter the main page.

5. Click "Setup Wizard" and then "Next", and select "Relay Mode" in the "Setup Wizard - Working Mode" page

6. Click "Next" to enter the "Setup Wizard - Wireless Settings" page, and click "Scan";

7. The "AP" information list will pop up, where the SSID is the SSID name of the wireless WiFi and the BSSID is the MAC address of the wireless WiFi. Select the wifi you want to relay and enlarge and click "Connect";

8. SSID and BSSID will be automatically filled, and then select the encryption method (the encryption method should be consistent with the encryption method of the original WiFi), fill in the password, and then save;

9. Finally, restart the router and it will take effect.

Plug in the wireless wifi repeater and wait for a while for the indicator to be stable and normal.

1. Turn on the WLAN on your phone, find the wifi named after this wireless wifi repeater, then select it and connect to your phone.

2. Then a wireless wifi repeater management page will pop up, if it doesn't pop up, you can open the mobile phone browser, enter the access address marked on the wireless wifi repeater, you can open it, and then set a login password, and then click to start setting up the expander.

3. At this time, the wireless wifi repeater will automatically start scanning the available wireless wifi, and it takes a little time to scan for a while.

4. If there is no available wifi scanned for a long time, then you can directly click "manual entry" below.

5. On the new page that appears, enter the name of the available wireless wifi, and then enter the corresponding password, the name of the wireless extender can also be the same as the name of the wifi, and then click the extension button.

6. After the setting is completed, the page will automatically switch to the one shown in the figure below, which means that the setting on the wireless wifi repeater has been basically completed, at this time, just check the indicator light on the repeater, if it is green, then you can start using it.