What should I pay attention to when using wall stickers?

Wall stickers can be applied to smooth textured surfaces such as walls, glass, tiles, furniture, and home appliances coated with latex paint. Considering the differences in the wall, it is recommended that the wall of special material or the wall of a relatively long time can be picked a corner first, and the test can be done with the free test sticker given by the store, if there is no problem, you can rest assured to paste it. Attention:

It is easy to drop the wall powder and inferior wall paste, if there are all the consequences, the buyer is responsible for it! When I remove it, I use a hair dryer (hair dryer) to blow it while removing it, and I have no problem!

You can consult on the Dobet Wall Sticker Network.

Wall stickers save a lot of money than gypsum board, asbestos boards and other decorative materials 1 square meter of gypsum board can be installed half of the wall wall stickers This account is calculated by yourself.

Aesthetically, it is more individualistic and modern.

After scraping putty on the wall and brushing latex paint (must be treated on a flat foundation), wait for the wall to dry thoroughly. Prepare a scraper (small area or prepare a dry towel) before sticking the wall sticker, wipe the dust off the wall sticker part with a damp cloth, immediately paste the wall sticker, and flatten it with a scraper or towel.

That kind of Korean wall stickers look very beautiful but expensive, and the style is not suitable for most families because it is too gorgeous, but if your home is European, you can try it.

Or find the pattern you want first and then go to the print shop to do it, the kind of self-adhesive, the disadvantage is that it may be a single color on the same pattern, and it can't be too fine.

You can look in the market.

If you have a basic knowledge of painting, you can just use paints or paints to paint yourself.

Some people may think that wall stickers are similar to hand-painted walls. So Fuwo let me tell you, the wall sticker is a pattern that has been designed, and you only need to stick it on the wall, glass, tiles, etc., without doing anything else. You don't need to wave a pen and ink, as long as you choose the right one that is consistent with your home decoration style, the effect will be very good.

It is not only convenient but also can highlight the owner's taste, and add a lot of fun to life.

So what do we all need when buying wall stickers? You can take a look at the following three points!

Wall sticker purchase 1 to identify the smell: usually when buying, to open the package to check, whether there is some special pungent smell, if there is such a situation, there may be unqualified glue will be doped with gasoline or formaldehyde ingredients, if it is a qualified product will not produce a very strong smell.

Wall stickers buy 2 stickers sticky stickers: generally good quality stickers, at the beginning will feel that the stickiness is not strong, but paste it for a while, will not warp the edge, very flat, if within 1 hour, there is no edge, warping phenomenon, basically think that the stickiness of the collapsing family paper is up to standard.

Wall sticker purchase 3 printing effect: this only needs to use your eyes to see whether the printing color is accurate, whether the color is sleepy and distinct, generally the indoor wall sticker printing color is longer than the wall sticker that has been irradiated by the sun.

Wall stickers are ready-made stickers that have been designed and made, and they only need to be pasted by hand. Wall stickers are loved by many consumers because of their aesthetics and making the room more comfortable and beautiful. Today, I will work with you to understand the advantages and disadvantages of wall stickers, and let's take a look at the methods of removing wall stickers.

1. What are the advantages and disadvantages of wall stickers?

1. Various styles.

At present, the wall stickers on the city are rich and colorful, and have a strong local decorative effect. Owners can choose different wall stickers according to the decoration style of the house, there are different styles such as concise and elegant, and they can also choose according to their own preferences.

2. Simple to make.

The construction of the wall sticker is also relatively simple, and the decoration is more relaxed. Compared with traditional wallpaper, wall stickers are one of the more novel decorative materials. Not only is the wall decorated with wall stickers better than wallpaper, but its construction process is also easier.

Secondly, the wallpaper is easy to fall off or mold after being used for a long time, and the wall sticker not only has a strong visual effect, but also is not easy to fall off.

3. Produce peculiar smell.

Some wall stickers are made of leather, because of the material, there will be some peculiar smells, and in serious cases, it will cause greater harm to the human body. Secondly, the leather wall sticker has fewer patterns and is not easy to replace frequently.

Second, the method of removing the wall sticker.

1. Wall stickers on latex paint walls.

Heat properly with a hair dryer, (not continuous heating, because the glue on the back of the wall sticker will be easier to deglue when tearing because of excessive heating) When the temperature reaches about 40 degrees, you can use your hand to taste the wide hail to try to tear the corners, if you don't find the degumming, you can slowly tear it off, and you can gradually remove it according to the above methods for relatively large styles. This method basically avoids tearing off the wall paint, but it is possible that a very small amount of glue will remain on the wall.

2. Wall stickers on wallpaper.

If it is PVC wallpaper, it can be torn off according to method one, for a small part of the glue can be scrubbed clean, if it is pure paper wallpaper and non-woven wallpaper, it is not recommended to remove the wall sticker, there is no effective method at present.

3. Wall stickers on the glass.

It can be directly torn off, and the glue left behind by the old can be scrubbed with alcohol or detergent, gasoline and other items, or it can be removed according to method 1.

Wall stickers have been loved by many consumers because of their good practicability and aesthetics. In daily life, you can use the above methods to get rid of the wall stickers, so that the wall remains clean and beautiful.

Wall stickers are loved by many people for their strong decorative arts, beautiful and generous, and many families love to stick wall stickers when decorating new houses, so what are the advantages and disadvantages of wall stickers? How to paste wall stickers? We've got you covered.

What are the advantages and disadvantages of wall stickers.

Advantages: 1. The construction of the wall sticker project is relatively simple, and the decoration design is more relaxed. Compared with traditional wallpaper, wall stickers are one of the more creative building decoration materials.

The wall decoration design with wall stickers is not only more obvious than the effect of the book's slippery wallpaper, so its construction stage is also very easy. In addition, the wallpaper is easy to fall off or mildew after being applied for a long time, and the wall stickers not only have a strong visual impact, but also are not easy to fall off.

2. It is very convenient to clean the wall stickers, especially for families with children, it is the nature of children to scribble, if the wall is scribbled by children, it is difficult to remove. If you apply a wall, you don't have to worry about this situation, just clean it with a damp rag.

Defects: The removal of the wall sticker is very troublesome, it is glued up, and the adhesive ability used is very strong, it is not an easy task to remove, such as operation error, the wall will leave a mark after removal, and the overall beauty of the house will be serious when it is serious, in addition to the use of the wall sticker is shorter.

How to paste wall stickers?

1. Before pasting the wall sticker, you must prepare scissors, knives, and savings cards in advance, and cut out the excess vacancy near the wall sticker pattern for distribution, so that it is easy to paste it.

2. Then stick the transfer film to the pattern, and then use the savings card to scrape back and forth on the film, so that the pattern and the film can be better glued together, and there will be no bubbles.

3. Gently tear off the transfer film with the pattern from the oily paper, if the pattern does not stick to the transfer film, you can use a knife to assist. If it is a pattern with a large total area, then the pattern can be reversed, and the oily paper can be torn off the transfer film and pattern.

4. When you paste the pattern, first stick the corner of the transfer film to the wall, and then gradually tear off the film with the pattern along the bottom, and use the credit card to go back and forth diagonally to the surrounding directions twice, so that the wall sticker can be better glued to the wall.

5. Be sure to pay attention to tearing the transfer film, be sure to tear it slowly, be able to tear it while pressing, remember not to tear it too fast, otherwise the pattern will be torn off together.

Pay attention to the glue at the corners of the corners without making it have some gaps, or the warping phenomenon of weak adhesion, otherwise it is easy to fall off in a large area in the later stage. Wallpaper is strong in terms of material, there are paper wallpaper and chiffon wallpaper, and the material of the wallpaper can be selected according to the functional needs of the indoor space, of course, you should also consider the ** of the wallpaper. Compare the colors of the pattern, check if it matches the wallpaper ordered, and if there are roll numbers, arrange them in order of roll numbers.

When cutting wallpaper, measure the height of the wall, calculate how many walls a roll of wallpaper can be pasted, and cut it according to the size.

To ensure that there are no cracks, it is also necessary to apply a bandage to the joints after the plaster powder has dried. Generally speaking, there are good cloth, kraft paper and grid gauze. Due to the large gap and weak adhesion of the mesh gauze, it is rarely used at present.

The switch box or other protruding decorations on the wall should be removed after the power is turned off, and then installed after the construction is completed. After all, cut off the remaining wallpaper at the edges.

<> the position of the wallpaper seam can not be scraped repeatedly with a scraper, and it is also necessary to pay attention to cleaning the glue in time, otherwise the seam is very easy to fade or collect glue due to scratching the epidermis, and roll the glue. We usually use glutinous rice glue. Follow the instructions to prepare the glue.

Don't roll too much glue at a time, roll one piece and paste one piece. The required tool is a roller. Be careful not to tear up the wallpaper.

After each wallpaper is pasted, remember to clean up the glue at the corners of the wallpaper in time, so as not to be able to clean up after the glue dries up, which will affect the appearance.

If the wallpaper has obvious patterns and patterns, it is necessary to pay attention to the symmetry of the pattern, so the cutting length needs to be appropriately increased in the unit length of the pattern cycle. When sticking wallpaper, we generally start from the dark corner of the wall, and pay attention to drawing the plumb line. When the wallpaper is pasted, we need to use a special wallpaper pressure roller to drive out the bubbles in the wallpaper, and then cut off the excess wallpaper after pasting it firmly.

Wallpaper on the wall, this pair with the wallpaper splicing, pattern comparison, is very important.

Pay attention to the relative humidity of the air in the indoor space.

It is necessary to ensure that the wall surface to be paved is smooth, dry and free of dirt and dust.

Before pasting wallpaper, it is best to apply a layer of polyester paint on the wall, the main function is to prevent the wallpaper from being damp and mildew in the future, affecting the service life, and avoiding time-consuming and laborious replacement of wallpaper in the future.

When pasting wallpaper, it is necessary to ensure that the wall is clean and tidy, so as not to affect the overall effect, and at the same time pay attention to the concentration of the glue, cut the wallpaper according to the height of the wall, and then evenly coat the glue on the back, and then paste it vertically from top to bottom.

I think that when there is wallpaper, we must pay attention to the size of the wall, and pay attention to the unevenness of the wall, and when you have to stick it, you must pay attention to whether it is flat.

Second, paste the wallpaper, the wall treatment before the wall sticker.

1. Before pasting, the wall must be treated with cherry blossoms, and the wall treatment is to make the wall surface smooth and clean, dry and free of cracks and holes, solid and free of floating dust.

2. If the cement brick wall is relatively flat, use putty to flatten it, brush it with a thin varnish and paste it after it dries. There are joints in the surface of gypsum board, plywood and wood board, so the joints should be repaired before plastering.

3. The function of varnish and sealing primer is to solidify and protect the surface layer of putty, and it can also strengthen the anti-alkali function. Lacquering should be done after the putty has dried completely.

4. Paste wallpaper, the wall treatment of the wall paste and the wall treatment of the paint are about the same, so the paint wall is very suitable for changing the wallpaper, but it needs to be sanded.

Wall stickers, also known as stickers, casual stickers, etc., are called wallstickers in English, reflecting her casualness and highlighting the characteristics of her personality. A simple wall sticker is a monochrome pattern sticker that uses a cutting plotter to carve a pattern on a sticky note. It is different from traditional wallpaper, it is just a set of hollow patterns or patterns, once, it looks simple and generous.

The wall sticker is made of PVC material with glue on the back, which is a kind of wall home decoration that can be easily done by yourself, and its posting method is single. It is not only simple and convenient, but also very casual, and the decorative effect is also very intuitive, suitable for modern families, and is also recommended for store wall decoration. In addition, there is no need to squander pen and ink, as long as the overall decoration style, as well as the owner's personal temperament, choose a good pattern to stick at home, not only show the owner's interest in life, let the home give a new life, but also lead the new home decoration trend.

It is different from the traditional hand-painted wall, it has already designed and made ready-made patterns for you, you only need to stick it on the wall, glass or tile to have many styles and strong decoration. Pretty good. You can post it as much as you like.

It is very suitable for lazy people, fast-paced life, everything is fast and easy, a beautiful pattern that has been carved you only need to paste it to the position that needs to be decorated, compared to asking the decoration team to design and produce a decorative wall with a higher cost than He, it is really convenient and practical and economical.

Any favorite patterns, patterns, etc., wall sticker manufacturers can be designed and made into wall stickers by the designer. Many people wonder if the corners of the wall stickers are easy to warp, and the answer is no, the correct way to post them can avoid warping. The PVC material on the wall is waterproof, if it is dirty, just wipe it with a wet towel.

It is also very convenient to replace, if you are not satisfied with your wall stickers, or are tired of seeing, and want to change to other patterns or new living environments, follow the correct method to tear the wall stickers, and will not leave "sequelae".