When the mobile phone is connected to WIFI, it always prompts to get the IP

There could be two reasons for this:

1. You have ever connected to the wifi of this name, and the mobile phone automatically saves the password corresponding to the same name, and then the wifi of this name changes the password, and the password saved by your mobile phone is not updated, so it will always prompt back to IP. Workaround: You click on that wifi and then select Don't Save, and then reconnect again.

Enter a new password. Succeed.

2, I understand what you mean I can't find a place to set wifi, an easy way is to go directly to the desktop drop-down menu, there should be your wifi switch on it, and then long press the wifi switch to directly enter the wifi settings page, which can set wifi, in the wifi settings page you can click on the phone's menu key, there will be a "scan" option, you click on the scan will terminate to get ip, you can choose different wifi

Here's how to fix it:

Method steps.

First of all, let's take a look at the problem phenomenon, as shown in the figure, when I connect to the specified wifi, I know the password, click on the connection to enter the password, it will display: "Authentication", that is, password verification.

After the password is correct, it is to get the IP address, and many times you are stuck here for a long time and cannot get the IP address.

In the end, the fetch fails, and it displays: "Save", which proves that you have saved this wifi for next use.

What is the reason for this, this is because many wifi routes can be connected at the same time with a limited number of users, otherwise too many users at the same time will cause the router to freeze. So set the IP address range in the router DHCP, as shown in the figure, only 10 users are allowed to be connected at the same time, this is your friend can connect, it just happens that the IP address is used up, you can't get the IP address, you can't connect to WiFi.

It's good to know the reason, since you can't get the IP address, then give your phone a fixed IP address. Press and hold the SSID name of the WiFi, pop up the menu, and select: "Modify Network".

Click the tick to select "Show advanced options", which varies slightly depending on the brand and model of the phone.

In the IP settings, the default is DHCP to obtain the IP address, but now it is changed to static.

Now you have to enter a fixed IP address, what kind of IP address to enter, this needs to see which IP segment your friend obtains the IP address, if it is alone, it is not easy to ask the business, just guess, one is or this is used more, and now many new routers and administrators also use a variety of IP segments.

After the above is entered, I found that the save button is gray, I can't save it, enter the password again in the wifi password column, and the save button is not gray, and then you can go to reconnect and try it.

If the IP address is set correctly, you can connect to WiFi.

What is called an ordinary mobile phone, even Symbian's can be set up, let alone Android. Android,And the settings are not the same,Moreover,Different brands of mobile phones are different,I can only tell you to wifi**Click on advanced settings。

Restart your router, or your phone, or flash your phone.

In order to prevent too many users from accessing at the same time and affecting the network speed, the number of users accessing at the same time is limited, and the IP address range is set in the router DHCP. Therefore, it is possible that the people around you can access the network normally, and at this time, the IP address has just been allocated, so you can't get the IP address, and you can't use the WiFi network.

Solution: Go to the system settings --- wireless and network --- wifi settings--- menu keys--- advanced --- check "Use static IP" in the IP settings below

2.The easiest way: cancel the wifi save and re-establish the connection; Restart your phone or router.

3.Press the router's factory reset button and reconfigure the router settings. After success, the router will automatically assign an IP address to the phone, if it still doesn't work, please try a few more times.

4.If the above methods still cannot connect to the wifi smoothly. You can try the following workarounds.

When the wifi connected to our search stove shows that the password is incorrect, there will be a few words "authentication problem", this laugh leaks when you have to press and hold the network connection, modify the network, and try to enter the correct password again.

5.We can set a fixed IP address for the phone - a static IP. It is to press and hold the name of the wifi network and select "Modify Network" in the pop-up page column.

Then click on "IP Settings", the default is "DHCP", now we change it to "Static". Restart your phone and router, still doesn't work, replace it with another router to try.

Here's how to fix it:

2. Then click on the entry and select the item "Modify Network", as shown in the following figure

3. Then enter the dialog box to enter the password, and check "Show advanced options", as shown in the figure below

4. Then select the "Static" option in the "IP Settings", as shown in the figure below

5. Finally, set the following parameters, set and save, and reconnect to the wireless network.

When a WiFi user needs to connect to a network, their device sends a request to get an IP address. However, there are times when the wifi device keeps getting the IP address and can't connect to the network properly. This is because the WiFi device may not have a cavity to acquire a usable IP address.

Specifically, it may be that there is a problem with the mobile phone itself, or there is a problem with the relevant configuration in the wifi network, or the wifi is in arrears and cannot be connected.

The solution to wifi not connecting:

1. Check whether the wifi can be used normally, and if the arrears are renewed, it can be used normally.

2. Disconnect the wifi connection, delete the wifi records saved in the phone, and then reconnect the wifi to try to get the ip address normally.

3. After the mobile phone is connected to the WiFi network, it shows that the IP address is being obtained, you can log in to the WiFi settings page, enable the DHCP server, and operate according to the prompt.

4. If the mobile phone is not connected to wifi, and the computer can, then restart the mobile phone or the mobile phone version is not compatible, upgrade the version. Go to the IP settings, there are DHCP and Static options, select Static. <>

Summary. Hello, glad to answer for you

First of all, we click on the settings icon on the desktop of the mobile phone to enter the settings interface.

Then tap on the WLAN option inside.

Then click the button behind the WLAN inside to turn on the wireless function.

Then click on the wireless network where the IP address is being obtained to enter the configuration interface.

Then click on the button behind the static IP inside to turn it on.

Then manually enter the IP address and DNS in it, through the fixed address, you can surf the Internet normally, save the settings, and you can connect.

In addition, you can enter the router management interface, through the management of users, increase the number of people who use wireless at the same time, and you can also let us surf the Internet normally, and will not always prompt that you are getting IP, you can connect to the wifi network.

What should I do if my phone is connected to wifi and it prompts that it is getting an IP address all the time.

Hello dear, <>

You need to wait patiently for about three minutes, and the answer will be revealed for you immediately, so don't worry!

Hello, I'm glad to answer for you First of all, we click on the settings icon on the desktop of the mobile phone, enter the settings interface, then click on the WLAN option inside, and then click on the button behind WLAN inside, turn on the wireless function, and then click on the wireless network that is obtaining IP, enter the configuration interface, and then click the button behind the static IP inside, turn it on, and then manually enter the IP address and DNS inside, through the fixed address, you can surf the Internet normally, save the settings, You can connect to the router management interface, through the management of users, increase the number of people who use wireless at the same time, you can also let us surf the Internet normally, will not always prompt that you are getting IP, you can connect to the wifi network I hope it can help you!

Hello dear, glad to answer for you! Here's the answer: just set it up.

Method 1Go to the mobile phone system settings--- wireless and network--- wifi settings--- menu key--- advanced --- check "Use static IP" in the IP settings below2Under Use a static IP address, set the following parameters

It is divided into three types, see the computer in detail) domain name 1: generally consistent with the above gateway address, directly Internet access must be modified to the network gateway address) domain name 2: do not fill in (fill in special circumstances) 3

Save! After that, you will find that your wifi will automatically reconnect after being disconnected, and then you don't have to restart the route, and you won't always see the "getting IP address" prompt.