How to convert between word, excel and CAD!

Convert between cad,word,excel 2010-11-03 11:49:26 Read 10 Comments0 Font Size:Large, Medium and Small Subscribe.

First, the steps of copying CAD drawings or ** to word and excel.

1. Change the value of the CAD system variable WMFBKGND to OFF, so that the CAD background is transparent, if you want the copied graphic to be black and white, you can change the layer color to white (No. 7) in the layer manager;

2. Select the graphic to be copied and use the "Copy" tool to copy;

3. Switch to Word or Excel, activate the area that needs to be pasted, and then select ""—Paste";

4. The initial effect of pasting is as shown below;

5. Use "** Crop" to cut off the blank area of the graph, and then scale the graph to a suitable size by dragging the diagonal method;

6. The effect of cropping and scaling is as shown below;

The method of copying to excel is also the same as above.

Second, word, excel graphics or ** copy to cad steps.

1. Select the graphic or ** that needs to be copied, and use the "Copy" tool to copy;

2. Switch to the CAD program and select ""—Paste Selective";

3. Choose to paste as "AutoCAD Element", the purpose of this is to paste it in CAD;

4. Select the paste insertion point, and the effect after pasting is as shown below;

5. The pasted lines or text can be directly in CAD, as shown in the figure below;

CAD to Office Supplement a few points: CAD drawings are pasted into Word, Excel, PowerPoint, and Publisher can be used in this method.

1. Line width - it is recommended to use a polyline to set the line width, because the width of the line is only wide and narrow after pasting, which is not beautiful;

2. Proportion problem - if possible, try to use 1:1 drawing, where 1:1 is the printing ratio, that is, if you need to print 10mm, you can draw 10 graphic units, so that you can control the proportion of the drawing, and you can control the width of the line;

3. Background color - 2002 can be copied in the layout space (the background of the general layout space is white) and copy it directly, without modifying the background color.

1. Open the CAD drawings that need to be converted, and need the drawings that need to be converted**. Then minimize the CAD drawing, return to the desktop, and open the CAD converter. Once opened, click on Centeralignment and Drawborders on the CAD converter.

2. Open the drawing containing ** in CAD or create a new one**. Select the ** to be exported, right-click and select "Hongsun Copy" or press "Ctrl+C" to copy. Open the Word document and move the cursor to the location where you need to insert the ** return.

4. Use truetable software, and then copy the CAD ** into Excel and then copy it into Word.

It cannot be converted, only the word document can be pasted into the CAD.

Insert – object – created from a file.

Then resize the document until it fits.

Generally, word instructions are placed in CAD like this. Very convenient.

Copy the content in Word, and then select "AutoCAD Element" for "Paste Special" in CAD.

CAD for office use is inserted into Word.

is the most commonly used.

In order to zoom in and out when inserting a graphic.

All are guaranteed to be printed clearly.

The output should be as a vector image.

Here's this software.

It can be used in any CAD version without spending a whole of money.

After using it for novices.

It can also greatly improve the efficiency of CAD drawing.

Send me one too.,185543771qq。。 Thank you very much.

Copy the drawings in CAD software and paste them into Word. In this way, you can convert CAD drawings into Word documents, please refer to the following steps for specific operations.

1. Open the CAD software on the computer, and then enter the home page of the software.

2. Then select and import the drawing file to be converted in CAD.

3. Then click on the icon of the "Maximize" option in the viewer area in the property bar above the software to zoom in on the drawing to the maximum.

4. Then select the layer option in the CAD drawing setup ribbon to open the layer settings window.

5. Select the first layer, hold down the shift key, click the last layer, select all, then change the layer to black, and then click OK.

6. Find the three copy software functions in the property bar of the software.

7. After selecting Copy, open the Word document, and then paste the copied CAD drawings into the Word file and save them. After completing the above settings, you can convert the CAD drawing into a Word document.

Open AutoCAD, click on the menu "Tools" "Options" "Display", and then click "Color (C)...In the Color Options dialog box, select "White" in the color bar, apply and close, and then make sure to turn it to a black line on a white background. Click on the menu "File" in CAD and save it in BMP format**.

Open the word document, click the menu "Insert" "**" "From File", and select the ** saved in front of you.

3.There is also a simpler way, select the drawing in CAD, copy it with Ctrl+C, and paste it with Ctrl+V in the Word document to produce the drawing in the Word document. If you want to use ** to enlarge the graphic appropriately, you can use the QQ screenshot function to cut out the picture of the black line on a white background.

CAD to word, this is the basic operation of CAD conversion, for this problem of the landlord, the specific operation method is as follows:

Step 2: In the CAD drawing settings ribbon, select [Layer] to open the layer settings window.

Step 3: Select the first layer, hold down the shift key, click on the last layer, select all, then change the layer to black, click OK. (The color setting can be changed according to your needs).

Fourth: Move the mouse to select all, or press the shortcut key Ctrl+A to select all, and then find three copy soft functions in the toolbar: Cut frame:

Slice, a rectangular area marked in the drawing for copying, printing, and saving. Copy to EMF format: Copy the image of the entire activated form to the clipboard at the current scale in EMF format.

Copy to BMP Format: Copy the image of the entire active form to the clipboard at the current scale in BMP format.

Step 5: After selecting Copy, open the Word document and paste the copied CAD drawings into the Word file.

Step 1: Open the text recognition tool you just prepared and click the fast recognition function in the above function bar.

Step 2: Add the CAD drawing through the button in the upper left corner;

Step 3: After the ** is added successfully, select ** recognition format and ten times the effect above;

It is recommended to use OCR text recognition software to give it a try;

The computer is recognized by OCR technology, that is, optical character recognition technology. For example, Swift OCR text recognition is used to convert ** text through this technology.

The method used is also very simple: take a picture of the CAD image as **, and then upload it to the OCR text recognition tool, and click on recognition.

1. Insert CAD objects directly into the Word document, and then operate in the CAD window, save the CAD after completion, and insert the graphic content into the Word, and then double-click to start the CAD;

2. CAD output drawing file as ** file, and then insert the drawing file into Word.

The part you want to copy is partially enlarged by the entire CAD interface of that tool method. Of course, you can frame the rest of these parts and copy them.

Directly display the CAD graphics in 3 views, select all, copy, and then paste in Word, and slowly pull ** in the document.

1. Press Ctrl+C in CAD to select the drawing.

2. Go to Word and press Ctrl+P

3. Adjust the size and position of the figure.

It's very convenient to use a small software of betterwmf!

Material Tools: CAD

1. First of all, open AutoCAD2009 and open the CAD diagram that needs to be exported later.

2. Adjust the image to the maximum by shortcut keys or scrolling the scroll wheel.

3. Open the [Menu Browser] in the upper left corner of AutoCAD2009, find [File], and then click [Output].

4. Find the storage path, name the "file name", and select [metafile] from the blind link of "file type".

5. Select the figure through the selected area box.

6. Search for luggage after selection (after selection, the image will display a dotted line), and right-click in the selected area.

7. Next, insert the ** into the word <> according to the steps shown in the figure

9. After cutting, you can try to enlarge the ** at will, which is still very clear.

Hello! I understand that you mean that if you want to copy the content of the CAD drawing into the Word document of the ruler, you can insert AutoCAD elements in the Word document, so that you can carry out the CAD drawings in Word, as follows: 1. Use AutoCAD software to open the CAD drawings that need to be copied; 2. Open the Word document, select "Insert" in the menu bar, and find the "Object" selection (as shown below); 3. Select the AutoCAD element in the object or select the AutoCAD element and confirm, the Word document will call the AutoCAD program; 4. Copy the content of the drawings that need to be pasted into the Word document from the CAD drawings opened in step 1, and paste them into the blank CAD files opened in the Word document in step 3; 5. Double-click the mouse wheel, please maximize the brief paper, save and exit.