-
Anonymous users2024-02-07According to your description, follow these steps to connect and set up your wireless router:
One: the connection of the router hardware.
1.First, connect the network cable on the modem side to the WAN interface on the router (this interface is usually colored or positioned to distinguish several other interfaces with the same appearance).
2.In addition, prepare a network cable to connect to any of the four LAN ports, and the other end to connect to the computer network port. (Skip if using wireless).
3.Connect the modem and the power cord of the router, turn on the switch (some brand devices will start automatically after connecting, no switch), and the hardware connection of the above router is complete.
2. Connection settings of the router.
1.Log in to the router settings screen
Open the browser and enter the router login address in the address bar, the login address is different for different brands, but most of them are or check the label on the back of the router or the router manual).
2.Enter the login username and password, the default username and password please check the label or manual on the back of the router.
3.After entering the password correctly, you will enter the settings interface of the router, and the router that has not been set will automatically pop up the settings guide interface.
4.After selecting the connection method, click Next, and the interface of entering the broadband username and password will appear, and the username and password filled in here is provided by the operator when handling the broadband.
5.After filling in the correct username and password, click Next, the connection of the router has been completed, if you need to access the Internet through wireless mode, please see the next wireless connection setting method.
Three: How to set up the wireless connection.
1.Turn on the wireless connection function, set the wireless connection name, and other options are usually default.
2.Set a password for the wireless connection.
3.Turn on the wireless network card on the computer to find the set wireless network name, click Connect, and enter the set password to connect normally.
Anhui Telecom will serve you wholeheartedly, I hope mine can get yours.
Telecom broadband free speed, 4m liter 8m, 12m, 8m liter 20m, 20m liter 50m. You can go to the nearest telecom business hall, or call 10000 for free speed, details can be logged in Anhui Telecom online business hall.
If you have any questions, you can go to the Anhui Telecom online business hall to consult the staff, I wish you a happy life!
-
Anonymous users2024-02-06Hello! The specific installation and setup method of the Mercury MW325R wireless router is as follows:
1. Connect the power supply of the router, and then plug one end of a network cable into the network port of the computer, and the other end into the LAN port of the router.
2. Open the browser of the computer, enter the IP of the router in the address bar, click the enter key to enter the settings page of the router, the user name is admin, the password is blank, click to log in, and enter the settings home page of the router.
3. After logging in to the homepage, select Manual Settings. Then select Manual Internet Settings, and Home Dial-up users select the PPPoE connection type. In the username and user, enter the username and password given by the ISP provider (Netcom, Great Wall, Telecom, Tietong, Cable, etc.) correctly.
The connection mode selection is always filled in with the mtu value of 1492. The save is done.
4. The wireless router also has a wireless encryption to ensure the user's wireless security. Select the wireless settings on the main page of the router's settings, select an encryption method in the security mode, any one of WEP, WPA, or WPA2, and then enter 8 or more Chinese characters or numbers as the wireless password in the security key, and the router settings will be completed after saving the settings.
5. After the setting is completed, the router will automatically restart, and the external network cable can be used by connecting the external network cable to the WAN port of the router.
-
Anonymous users2024-02-05According to the manual, there is a setup wizard, so easy.
-
Anonymous users2024-02-04Dear telecom users, according to your description, it is recommended that you check whether your optical modem has a routing function, if not, do so:
1. The LAN port of the optical modem is connected to the wireless router WAN port.
2. Enter the wireless routing address on IE, General, 3, set the PPPoE connection, and the wireless password.
If the modem has a routing function, do so:
1. Enter the address of the modem on the IE, general, 2. Set the PPPOE connection of the modem.
3. Wireless router LAN address setting, and wireless password.
4. Turn off the DHCP of the wireless router, be sure to turn it off, otherwise an error will be generated.
5. The wireless router LAN port is connected to the optical modem LAN port.
You can set it step by step according to the manual, and the settings of different brands and models of wireless routers are completely different, but they are all very simple. Some modems can turn off the routing function, so deal with it according to method 1.
Thank you for your support of telecom products, pay attention to telecom activities and participate in time, you will get a lot of discounts. Guangdong Telecom users, please visit Guangdong Telecom's online business hall to enjoy fast self-service broadband installation and Internet access hall, which is faster, easier and more economical. For details, please visit Guangdong Telecom's online business hall.
Broadband Events Zone.
-
Anonymous users2024-02-03There is a router to set a broadband password. Optical modem connected to network 1
-
Anonymous users2024-02-02There is a login address and default account password behind the router, and a setup wizard should appear after entering the router settings interface, allowing you to choose the way to access the Internet, you choose PPPoE mode, the next step should be to enter the broadband account and password, the next step should be whether to use the wifi function, the next step should be to restart the router after the setting is completed, so that the setting is complete, and it can be used.
The fiber uplink and downlink rates of fiber telecom 2m, 3m, 4m are as follows: >>>More
Based on your description, if you're sure that there's nothing wrong with your router, it's likely that your router isn't set up. The steps below are as follows to set up the connection between the wireless router and the modem >>>More
The "telecom optical fiber" you mentioned does not refer to the optical fiber medium in a broad sense (as explained on the second floor, the bandwidth depends on the optical transmitter and receiver - that is, the optical module on the device), but the telecommunications user-oriented "optical fiber broadband access" service. It has been commercialized on a large scale, and the mainstream ones are FTTB fiber-to-the-building and FTTH to the home. In terms of bandwidth, the FTTB service model is gigabit to the building, 100 megabit to the floor, and 10 megabit to the home (dense cell). There are also 100 trillion direct to the door; FTTH is clearly gigabit to the home; The above refers to the physical bandwidth. >>>More
There are many scenarios of network slowness or disconnection, and further testing is necessary to find out the fault point before targeted troubleshooting, the specific steps are as follows: >>>More
First connect the access cable to the cat, and then connect one end of the network cable to the interface on the cat, and the other end is connected to a blue on the wireless router (generally blue, anyway, the hole that is different from the color of other holes), if it is a desktop, then use a network cable to connect the computer to the wireless router, the desktop will show that the local connection is connected, and now you need to change the IP address of the computer to the same network segment as the IP address of your router to start setting, general TP— link is to enter in the browser and press enter will jump to the settings interface,Run the setup wizard,Follow the prompts and it's OK,When there is a step, you have to choose pppoe,The password should be set, otherwise people will steal your network。 After setting, it's OK, your laptop or mobile phone can be received, and you can surf the Internet, of course, you can also use your mobile phone, but others can also get it.