How can I wash off the grid drawn with a ballpoint pen when embroidering cross stitch?

Updated on vogue 2024-03-02
10 answers
  1. Anonymous users2024-02-06

    1.Soak the stain in warm water (40) and scrub it with benzene or cotton balls dipped in benzene, then wash it with detergent and rinse it with water (warm water). Ballpoint pen.

    2.Soak the stain with cold water, gently wipe with carbon tetrachloride or acetone, then wash with detergent and rinse with warm water.

    3.When the stain is deep, it can be wiped with gasoline first, then rubbed with 95% alcohol, and if there are still remains, it needs to be cleaned with bleaching powder. Finally, gently rub with toothpaste and soap, and rinse with water. However, it is strictly forbidden to soak in boiling water.

    4.If it is dyed on paper, it is best to treat it with correction solution or correction tape.

    This is the method of cleaning ballpoint pen ink stains, excerpted from the "Encyclopedia", which should still be relatively effective.

  2. Anonymous users2024-02-05

    I can't wash it off, I have also embroidered, the fabric is as slippery as plastic, and the general embroidery cross-stitch should be washable pen drawing.

  3. Anonymous users2024-02-04

    Sweat. This really doesn't use a ballpoint pen.

    with a soluble pen.

    It is a pen that can disappear in color after being wet.

    Generally, there are places that sell cross-stitch.

    Other than that. It is better to wash the ballpoint pen with salt.

  4. Anonymous users2024-02-03

    Cleaning method to remove ballpoint pen:

    1. When the embroidery is dry, apply the original solution of Blue Moon hand wash or deep cleaning laundry detergent to the stain, completely cover the stain, let it stand for 5 minutes, gently scrub it, and then add Blue Moon laundry detergent for regular washing; Repeat if necessary.

    2. If the stain still cannot be removed by the above methods, put the clothes into the basin, stick the stain to the bottom of the basin, and measure 1 4 caps (10 grams) and 1 4 caps (10 grams) of blue moon collar with a blue moonlight color stain (600g) bottle cap, pour it on the stain, and let it stand for 2 hours. If the stain disappears, rinse well; If there are still stains after 2 hours, you can add an appropriate amount of water to moisten the whole embroidery and leave it overnight.

    Description: Ballpoint pen stains are difficult to remove completely, and multiple washes using this method can reduce stains.

    If you still have any laundry questions, please consult the Blue Moon Scientific Enterprise Enterprise Platform.

  5. Anonymous users2024-02-02

    You send it to the place where the cross-stitch is framed, and they can get it off.

  6. Anonymous users2024-02-01

    Even if the finished cross-stitch piece is clean, it is recommended that the relatives and grandchildren clean it, and the correct cleaning can make the embroidery look brighter;

    You can use detergent or ordinary laundry detergent to assist in cleaning, according to experience, embroidery cloth with high cotton content is very soft after water, it is recommended to use ordinary laundry detergent, harder embroidery cloth, you can use detergent to increase softness.

    Be sure to wash in cold water, you can soak it for 3 minutes at first, then wash it with your hands repeatedly and properly for about 3 minutes, and then change it to clean water and soak it for about 3 minutes, and try not to exceed 10 minutes in the whole process;

    After the cleaning process is completed, the general embroidery piece can be directly hung dripping water to dry, if the air humidity is high, you need to use a dry towel to roll the embroidery piece to press out the excess water and then hang it to dry;

    For the finished embroidery pieces with perfect circle and full embroidery patterns, after the water is out, the excess water is pressed out with a dry towel roll embroidery piece, and then hung to dry after adjusting the pattern to the best effect;

    The embroidery piece should be hung in a ventilated place, and it should not be exposed to the sun. Eggplant asked.

    The embroidery trembling pure piece is most suitable for ironing when it is dry for 9 minutes, the back is gently moved to iron the iron, and the perfect circle and full embroidery pattern are adjusted from the edge to the inside.

    After ironing, continue to dry until the embroidery pieces are dry.

  7. Anonymous users2024-01-31

    I opened a cross-stitch shop for socks leakage, and I usually washed the ones I bought in my store, so I have experience, so I soaked them in warm water for 10 minutes, (they won't fade, because there are many brands of cross-stitch in my store, and they haven't faded, including domestic ones.) So don't worry) then pour out the water in the basin, leaving only a damp cloth, and then drop a few drops of dishwashing detergent on your hands, rub your fingers back and forth on the surface of the embroidered cloth, don't pick it with your fingernails, wipe it until the bubbles come out, all the good places are washed and rinsed with cold water, wash the bubbles of the tung rot agent very well, rinse it with water, and then don't twist it by hand, hang it up with a hanger and wait for its natural dripping, to dry it flat, and don't bask in the sun, the sun will make the color of the line not so bright, to dry in the shade! Finally, iron it on the reverse side with a steam iron!

    Hey!

  8. Anonymous users2024-01-30

    Laundry detergent is the most important not to use, because it will affect the color of the embroidery line, and the balance book should not be soaked for a long time.

    I always soak it in water for a minute or two, fold it in half and rub it slightly, don't rub it like washing clothes, if you have some places where the needle is too short, it will fall out.

    Generally, it can be washed off, if it is not clean, you can add a little soap powder, and it is basically no problem.

    Don't wring it after washing, use a dry towel to absorb the water, spread it and air dry it naturally, at most sandwich it in a towel and iron it at low temperature, don't burn it directly, it will change color.

  9. Anonymous users2024-01-29

    It should be drawn with a pencil, washed after embroidery, and ironed on the back of the cross-stitch after drying.

  10. Anonymous users2024-01-28

    You should buy a water-soluble pen.

    And it's best to test whether it can be washed off before embroidery.

    Like you, if you embroider it, you can't wash it off.

    How angry Yu Yanchun.

    After washing, the jujube ears should be air-dried.

    That is, natural drying.

    Then iron the back of the erection.

Related questions
5 answers2024-03-02

It's not realistic to frame it yourself. Not to mention the technical problems, even if you know the framing procedure, but framing requires professional equipment such as corner cutting machines, nail corner machines, cardboard knives, etc., as well as many materials such as wooden lines and cardboards. With this set of things, the investment will definitely not be less. >>>More

21 answers2024-03-02

Tips to prevent cross-stitch thread fluffing:

1. First of all, don't buy cheap products when choosing cross-stitch embroidery thread, cheap no good goods, whether it is silk thread or cotton thread, poor quality is easy to fluff, ensuring the quality of embroidery thread is the most important. >>>More

21 answers2024-03-02

Embroidery with No. 1 or No. 2 line free combination, for example: first, use 1 strand of 1 strand plus 2 strands of 2 strands, a total of 3 strands, 2 strands of 1 strand plus 2 strands of 2 strands, a total of 3 strands, so that embroidery may lead to the use of 2 strands of poor thread, so when embroidering a part, you can swap it over.

26 answers2024-03-02

Imported good, imported DMC is the best, domestic bird of paradise is also OK, second only to the imported line, from the color. Glossiness. The texture is better than the domestic thread, the imported thread is not easy to break the thread, the domestic thread is embroidered unevenly, and it looks unbeautiful.

16 answers2024-03-02

This one can be completely DIY, it's not very complicated, and you only need one piece of software. >>>More