How to embroider cross stitch mix and match? Can a friend who has embroidered help answer it?

Embroidery with No. 1 or No. 2 line free combination, for example: first, use 1 strand of 1 strand plus 2 strands of 2 strands, a total of 3 strands, 2 strands of 1 strand plus 2 strands of 2 strands, a total of 3 strands, so that embroidery may lead to the use of 2 strands of poor thread, so when embroidering a part, you can swap it over.

Two strands for the front line and one strand for the second line!

If the embroidery thread is sufficient, it is recommended that you use two strands for No. 1 and No. 2 lines, adding up to 4 strands of embroidery mixed color, although one more strand looks fuller than the others, but at least there is no obvious difference in color.

In the embroidery method, you can have the other 3 strands, and when embroidering, the hand is relaxed, and the thread is not too tight. Mix the hand tighter, it's fine.

Mixed embroidery is two different colors of embroidery thread together, in the three strands, you need to use one 1 line, two 2 lines, or 2 1 lines, 1 2 lines.

Generally, when you buy such a picture, the thread used for mixed embroidery is on a board If not, then the picture you buy is not **, but don't worry, generally this kind of is used in the transition color of the place Most of them are from dark to light near the dark place with two dark colors When slowly to light color, use two light colors on it.

1 represents one wire for the first type of wire number, and 2 represents three wires for the second type of wire number, which adds up to three wires?

Which wire number is in front, it uses two strands of wire, and another strand of wire.

The cross-stitch hybrid full needle embroidery method is as follows:

1. Taking the ordinary one as an example, the number of specifications is: 173W 173H. Prepare the required cross-stitch tools and take them out and check if there is any missing thread.

2. According to the sample drawing, select the wire number, divide a line into two, three strands each, and then thread the needle.

3. According to the sample drawing, find the corresponding symbol on the embroidered cloth.

4. Find the position and first thread and knot it back and forth behind the embroidery cloth.

5. Prepare to tie the knot.

6. Put the needle on from the back of the embroidered cloth.

7. Then thread diagonally along an embroidery diagram cell, as shown in the following figure.

8. Repeat the cross-stitch method until all the symbols corresponding to the line number are embroidered, so as not to miss them.

9. If you miss a needle, you can jump back to make up for it.

10. For the same color next door, the thread does not have to be cut, and it can be directly passed through the bottom to continue embroidering, saving knotting time.

11. When a thread is embroidered, the next step is to tie the knot.

12. After tying the knot, cut it with small scissors.

13. Finally, when all the threads are embroidered, their cross-stitch works are almost completed, check whether there are any missing or colored ones.

Mixed full needle embroidery, embroidered 2 strands, is 2 color numbers of each strand, embroidered 3 strands is required to mix embroidery of 2 thread numbers of the first 2 strands, the latter thread number 1 strand, embroidered 4 strands that is the color number of each 2 strands mixed.

It is necessary to embroider the two colors A and B on a needle, (2 strands of mixed dark color + 1 strand of light color).

If it is a medium grid embroidery, use 3 strands, and hook the edge with 2 strands.

Cross-stitch hook edge embroidery method complex hook edge:

Cross-stitch outlines the edge line at the end, which will make the embroidery more prominent and beautiful.

Simple hooking:

Hook the edge with a strand of wire. Walk the stitches in the order of the position of the number marker.

When hooking the corners, in order not to leave a diagonal line on the back, it is necessary to operate as follows (odd number means to put the needle up from under the embroidery cloth, even number means to pierce the needle);

Some people like to go through the hook twice on the hook route. Go through the entire outline for the first time, then walk back and fill in the gaps;

In order to avoid the hook edge using this method not looking straight, pay more attention to adjustment when walking back. Hooking must be done after all the cross-stitches have been completed. The drawing will explain how many strands of thread should be used to hook the edge, generally with 1 strand of thread when embroidering with 2 strands, and with 2 strands of thread when embroidering with 3 strands.

The vast majority use a strand of wire. The method of starting and ending a line of hooking is the same as that of normal embroidery, as described below. The hook edge can be left to right, right to left, top to bottom, bottom to top, and even diagonally to the corner.

The specific way to go depends on the design of the pattern. The method of hooking from left to right should be like this (odd number means to thread the needle under the embroidery cloth, even number means to pierce the needle);

Neat and beautiful hook edge skills.

Method 1: When the needle is threaded to the back, wrap it around the back from the small vertical line that has been embroidered, thread the needle back to the front from the original needlehole, thread it on the front from the two threads of the previous needle hook, and continue to embroider the next stitch, if it is a single thread, do not need this step. This method is suitable for color blocks of multiple colors.

Method 2: Wear it through the small vertical above the needle on the back, and then thread it again from the small vertical below the needle, and finally return to the front from the original needle hole. This method is suitable for single color blocks, and can be used for both double and single lines.

The tendon holy dysentery array is like a cannon temple.

Rise Qianyu fell on the scales and hooked Dian Ai to investigate.

11ct cloth should be used with 3 strands, and the 4-strand line is just that the store wants to sell you more threads.

Oh, this statement is really the first time I heard it, I have heard that the current 11ct with 3 strands is because the domestic manufacturers in order to save costs to the kit less wiring, and I have also heard that 11ct with 4 strands is because the lattice is not standard or the line is not standard or something. It's just a legend. However, in the early DMC packages, if 11ct cloth was used, they were all allocated by 4 strands.

I don't know if it's because DMC manufacturers want to sell more threads, or because this brand is used as standard by most cross-stitches, and the cloth and thread are actually not standard.

Back to the question. It's not impossible to use 3 strands for 11ct, and many people around me embroider like this. It's okay to look at it alone, but if you compare it with the finished product of 4-strand thread embroidery, you can see the gap at a glance.

Not only is there a difference in color, but there is also a gap in three-dimensionality. I don't know why the difference in one strand still affects the three-dimensional effect, but I can see it.

In fact, if you use white cloth and black lines, you can use 4 strands to show the bottom, but it will be much better. If the flower part is far away from the word part, you can also embroider the word with 4 strands, as long as the thread is sufficient. Using different strands on the same image will not affect the effect, but it should be used in the right place.

Many original European and American drawings will be deliberately designed in this way to enhance the three-dimensional effect.

No, all of them are made of three-strand wires, but your hands are tight, and generally the black threads will leave the bottom cloth.

The 11ct three-strand embroidery will be exposed, but after the embroidery is to be framed to see from afar, so the white will not be too obvious after mounting, I have also embroidered the 11ct three-strand embroidered black letters, yes, insist on embroidering it after the good.

ps: After embroidery, there will be a water to wash off the lattice, so that there will be less white after the water.

White cloth and black lines will be like this, there will be instructions on how many strands of thread should be used, generally speaking, embroidery and butterflies are made of four strands, why will you use three strands? And it will be better after washing.

There is a description on the drawing, the two-strand thread mixed embroidery is the same one thread embroidery, the three-strand embroidery is more thread with two strands in the other thread embroidery, I wish the landlord to embroider it early.

Hello lz.

Guanyin diagram is a mixture of cotton thread and gold thread, if you embroider the medium grid embroidery cloth, then take 2 gold thread and cotton thread each and merge them into 4 strands to embroider the current mixed embroidery symbol.

The two threads are mixed together and embroidered like the others. Note that if you have three threads, the ones with multiple threads wear two, and the ones with fewer threads wear one. If you have four threads, thread two of each together.

Hello lz.

Glad to answer for you :

Mixed stitching method of cross-stitch.

To put it bluntly, it is two different colors of embroidery thread.

And together to embroider the current symbols.

Small checkered cloth (14ct) two strands embroidery.

Mixed embroidery is the taking of one strand of each of the two colors.

Composite two strands embroidered with the current symbol;

Medium checkered cloth (11ct) 3-strand embroidery.

Mixed embroidery is to take 2 strands of the former color and 1 strand of the latter color to synthesize 3 strands of embroidery with the current symbol;

Large Gebu (9ct

4-strand embroidery. Mixed embroidery is to take 2 strands of each of the two colors and combine 4 strands to embroider the current symbol.

This is the number of embroidery threads we usually use, if there are special instructions on the drawing, you should choose the corresponding number of embroidery threads according to the drawing instructions.

Have fun!