The shortcomings of the straw feed pellet machine, is the feed pellet machine cooked

The pellet machine is to use the mixed feed pellet machine to press the feed into blocks or strips. Pellets can be loaded directly into the trough or sprinkled on the floor of the pens for the livestock to eat. The use of small feed pellet machine has brought great changes to our lives, and now it has become the mainstream product in the market, and there has been a shortage of stock for a period of time.

The principle of the small pellet machine is to press the mixed feed or compound feed into strip pellets of different sizes with the feed pellet machine. Therefore, the general small feed pellet machine is enough to complete our needs, and this small feed pellet machine is also very cheap, his role is also very much, we put it into use not only as a feed pellet machine, but also can process some other pellet machine, the effect is also very significant.

The structure of the small feed pellet machine is also very distinctive, he is the same as some large pellet machines, his entrance is above, if we are processing the feed, we can pour it directly above, but we must pay attention to the uniform pouring, the disadvantage is that if the feed is too much, he will suffocate, so the impact on the host is very bad, the original host is small, but if the long-term external influence, then it will greatly shorten the service life, so the protection of these machinery is also a way to increase our work efficiency, One of the advantages of this kind of machinery is that other pellet machines can not be compared with his machine itself, which can adjust a lot of feed processing methods, and the size of the processing can be adjusted, which is much simpler than large feed pellet machines, so small feed pellet machines have slowly become some special products for feed processing.

The straw pellet machine itself has no shortcomings, but the output is not high if it is made of straw pellets, and the calorific value of the pellets is not high, so the profit is less.

There are many factors that affect the effect of discharging pellets from biomass pellet machine::

1. The most important factor is the selection of raw materials, different raw materials, different textures, some raw materials have a hard texture, some are loose, which will affect the molding effect.

2. The size of the raw material will also affect the discharging effect, if the raw material is too large, it is necessary to add another set of crushing device, and the raw material can be crushed before entering the granule to press the particles.

3. The moisture content of the raw material also affects the discharging effect, and when the moisture content of the raw material is too high, it will block the mold hole, so it is necessary to add a set of dryer equipment.

The production of biomass fuel pellets, the selection of raw materials is the first step, but also only the most important step, West German machinery reminds the majority of investment in biomass pellet machine friends, investment is to get rich, to do full preparations, can be invested.

Be.

In the process of squeezing the source pressure pellets in the pellet processing equipment, the temperature can reach 70-80 degrees, which directly leads to the fact that the pressed pellets are semi-ripe, and there is a natural ripe fragrance.

Feed pellet machine is also known as pellet feed machine, feed pellet mill, pellet feed molding machine, it belongs to feed pellet equipment, can be directly pressed into pellet feed after crushing raw materials, its main raw materials are corn, soybean meal, straw, rice husk, etc.

Feed pellet machine (also known as: pellet feed machine, pellet feed molding machine), belongs to feed pellet equipment. It is a feed processing machine that directly presses pellets from crushed products such as corn, soybean meal, straw, grass, and rice husks.

Preparation for operation: The feed pellet machine needs to check the machine parts and circuits before each operation. Check the rest of the material:

Note: Rest is required every 8-9 hours of operation.

1. Preparation for operation

Before each operation, the feed pellet machine needs to inject suitable gear oil, confirm whether the engine can start correctly, check the wiring of the machine, ensure the safety of electricity during use, and carefully check the tightness of the screws of the connecting part.

2. Check the remaining materials

Before feeding the feed pellet machine, it is necessary to open the machine to run for 1-2 minutes, add a small amount of material with a humidity of 13% after normal operation, and wait for the remaining material that was not discharged from the last operation in the machine to be completely cleaned.

3. Uniform feeding

When the feed pellet machine is loaded, the hard impurities in the materials are manually screened and removed, such as stones, irons, etc., so as not to damage the machine, and the materials can be put into the material at a uniform speed with the screw feeder, which can not only improve the work efficiency, but also ensure the normal operation of the machine.

4. Precautions

The feed pellet machine must be suspended for 30-40 minutes every 8-9 hours of operation, and drip into 2-3 drops of oil to lubricate the gear, and the feeding can not be too fast and too much, nor too little too slow, if the feeding is fast, the machine will be stuffy, but the machine will run empty, damaging the parts.

The better manufacturers of straw pellet machine are Shandong Shengshi Machinery Manufacturing, Jinan Longteng New Energy Heavy Equipment, Changzhou Vision Machinery, Shandong Mingfeng Machinery, and Liyang Zhongding Feed Machinery Factory.

1. Shandong Shengshi Machinery Manufacturing ****.

Specializing in the production of road construction machinery, excavators, road rollers, crawler conveyors, sprinkler trucks, solid-liquid separators, fecal suction trucks, manure cleaning trucks, TMR mixers, spreading trucks, crawler trenchers, green storage reclaimers, and other products.

2. Changzhou Vision Machinery ****.

Over the years, the company has been committed to the research and development of feed machinery, biomass machinery, fertilizer machinery and its complete sets of engineering, and is a professional manufacturing company integrating product design, manufacturing and complete engineering design and installation.

3. Shandong Mingfeng Machinery ****.

Shandong Mingfeng Machinery Co., Ltd. is mainly engaged in fog cannon machine, electric sprinkler truck, crawler ditcher, grass kneading machine, small spray cannon, feed pellet machine and other products, is a modern enterprise engaged in the production and sales of environmental protection machinery, agricultural machinery, engineering equipment, animal husbandry machinery.

4. Liyang Zhongding Feed Machinery Factory.

A professional production-oriented export enterprise. The main business is the design, research and development, manufacturing, sales, installation and complete sets of engineering services for feed machinery, biomass machinery, fertilizer machinery, storage machinery, pellet machine molds, intelligent control systems, etc.

5. Jinan Longteng New Energy Heavy Equipment****.

Jinan Longteng New Energy Heavy Equipment **** is an excellent manufacturer of vertical ring die pellet machine, sawdust crop pellet machine, dryer, providing new and excellent straw soft silk crusher manufacturers, crusher manufacturers, Longteng crusher, straw soft silk fine grinding machine automatic crusher, corn straw pellet machine LT-800 granule machinery production line and other products.

<> feed made with a feed pellet machine is generally cooked (internally cooked). Feed pellet machine, also known as pellet feed machine, feed pellet machine, pellet feed molding machine, it belongs to feed pellet equipment, which can be directly pressed into pellet feed after crushing raw materials, and the main raw materials used are corn, soybean meal, straw, rice husk, etc.

1. Please inject gear oil before starting, and tighten the plug head of the oil injection hole after refueling. 2. Carefully inspect the power lines of the pellet machine to prevent problems and leakage to ensure the safety of electricity. 3. Carefully check whether the bolts and screws of the connecting parts of the machine motor and pellet machine transmission parts are firm and loose, so as to tighten them in time.

4. After starting the machine, it will be idled for 1 minute, and then a small amount of material will be fed when the machine is rotated normally, and the remaining material in the machine can be evenly loaded after it is cleared. 5. Before feeding, please be sure to pay attention to the hard debris in the raw materials, and prevent stones and iron from entering the silo to avoid damaging the machine. 6. The first time you use the feed pellet machine, you need to run in the machine, add sawdust and oil, stir evenly, and run in with oil for 30-60 minutes until the surface of the grinding disc is smooth, and start to put the raw materials into the granulation normally.

7. The moisture content of raw materials is controlled at about 10%. 8. Every 8 hours of operation of the pellet machine, Senzu must refuel the oil injection air on the universal joint once, and 2-3 drops of oil can be injected at a time. Please put a little wet material or oil on the machine before stopping and renting, so that the material can be discharged smoothly after starting up the next day.

Henan Xideli feed pellet machine technician will answer for you.