How to identify the quality of ceramic tiles, what is the quality of ceramic tiles?

How to identify the quality of ceramic tiles, what is the quality of ceramic tiles? Floor tiles are the most important first step in the decoration of a new home, and we should choose the quality of the materials when decorating. 1. Drop a few drops of tea juice or water on the back of the tile, wait for a few minutes, depending on the degree of inhalation and diffusion of the water droplets, the quality is good if you want to know how the quality of LD ceramics is, you can try it like this.

2. The color and chromaticity of the ceramic tile are clear and natural, indicating that the porcelain degree is high, the chromaticity is not clear, and the porcelain degree is low; 3. The pattern should be delicate and realistic, and there should be no obvious defects such as lack of color, broken line, and dislocation; 4. The glaze should be smooth and delicate; 5. Put several ceramic tiles together, carefully inspect under the light, the color difference of good products is very small, and the color tone between products is basically the same; The color difference of poor products is larger, and the shades of color between products are different; 6. Knock on the tile to hear whether the sound is crisp, the more brittle the sound, the higher the porcelain degree and density, and the better the hardness; 7. Scratch the tile with a sharp object to see if there are scratches, if there are scratches, it means that the glaze is poor and easy to make people slip, and the surface of the glaze is polished, and the brick surface will not be able to be cleaned; 8. When purchasing, observe whether there are pinholes on the surface with the naked eye within one meter, if there is, it means that the glaze is not completely integrated, and it is easy to accumulate dirt; 9. Observation of warpage: whether the side of the tile is straight with the naked eye, if the warping situation is serious, it will affect the firmness of the tile paving in the future; 10. Choose tiles according to the specific use environment, such as the best choice of non-slip and easy-to-clean full-body bricks for bathrooms. When choosing floor tiles, it is important to consider the following aspects:

First, it depends on the brand. Only well-known brands of floor tiles, the quality of their building materials can meet the national standards, and the content of harmful substances can be within a safe range. Second, it depends on its anti-pollution ability, if the family is very busy and can only clean once in two or three days, then choose the one with better anti-pollution ability.

Third, if there are elderly people and children at home, you must do a slip resistance test when purchasing. Specifically, the selection of floor tiles can start from the following aspects. 11. The specifications can be measured with calipers.

Good product specification deviation is small, after paving, the product is neat and uniform, the brick joint is straight, and the effect is good. Poor product specifications deviate greatly, and the dimensions between products are different; 12. The tone of the exterior wall tiles should be in harmony with the surrounding environment, and high-rise buildings should generally not use white or too light-colored exterior wall decorative bricks to avoid the lack of texture of the building; In interior decoration, the tones of floor tiles and interior wall tiles should match each other. All facilities should be based on sanitary ware, and the quality and grade of wall and floor tiles and various accessories, including hardware and other supporting materials, should be consistent with them.

How about the quality of aesthetic tiles? The color and chromaticity of the beautiful tile are clear and natural, and the water absorption rate is relatively high, which is very good, such tiles are not easy to break, it is recommended that you use the above methods to try it

As the saying goes, "cheap is not good, good is not cheap", but for decoration, if you have the mentality of picking expensive, you must be the best, just like the fish and meat slaughtered on the chopping board of the building materials market. Because there are many types, patterns and sizes of ceramic tiles, many people spend most of their time choosing tiles when they do decoration.

Tile type. Ceramic tiles are roughly divided into polished tiles, antique tiles, porcelain tiles, glazed tiles, full-body tiles, microcrystalline stones and other types (see picture).

After having a general understanding of the tiles on the market, we can choose tiles according to them.

living room tiles. For the pragmatist, dirt and wear resistance should be the preferred basic performance of ceramic tiles, and most living spaces, especially in the living room where guests and people come and go, need to be hard enough and wear-resistant tiles. It is also the reason why most people choose polished tiles as living room tiles.

Living room background wall.

Microcrystalline stone is a popular high-end ceramic tile material in recent years, with exquisite texture and bright color, many owners will choose to use microcrystalline stone tiles to decorate the TV background wall, luxurious and atmospheric, which can instantly enhance the taste of the living room.

Kitchen wall tiles for purchase.

The kitchen wall should be scrubbed-resistant tiles, and the kitchen wall should be made of wall materials that are easy to clean and not easy to get oily, as well as fire-resistant and heat-resistant tiles. Although there are alternative products such as fireproof boards, glass, and coatings in the market, ceramic tiles still occupy the mainstream market.

The glazed brick is used as the kitchen wall, the glaze is transparent and acid and alkali resistant, and has a complete isolation effect on oil stains, so that bacteria, odor, scaling, and slime cannot breed. The surface of glazed tiles is divided into two types: bright and matte, and the bright light is easier to take care of.

The overall matching of porcelain tiles, flower tiles, and waist lines is more transparent and warm.

Kitchen floor tiles for purchase.

Choose a full-body brick, the material and color of the front and back are consistent, with good slip resistance and wear resistance. Generally known as "non-slip bricks", they are found in lobbies, hallways, and outdoor walkways.

Bathroom tiles.

The decorative materials commonly used in the wall and floor of the bathroom are glazed tiles, vitrified tiles, and mosaics. Bathroom wall tiles must be covered with waterproof, anti-corrosion and anti-mildew tiles, floor tiles are recommended to choose tiles with a certain friction but light texture, non-slip and avoid hiding dirt, and it is not so difficult to clean.

What line of brands is Weimei tile? A good brand of tiles, the more outstanding the effect of pasting. This has become one of the standard references for owners to purchase ceramic tiles.

Believing in the power of a brand is better than choosing some unknown brands. So, what is the brand of beautiful tiles? How to check the quality of tiles?

Below, let's take the source of the Fu Ling to take a good look at the beautiful tiles.

First, the beauty of ceramic tiles is several lines of brands.

1. Weimei ceramic tiles, originated from Guangdong, founded in 1988, one of the top ten ceramic tile brands in China, is a large-scale private enterprise mainly engaged in the design and production of architectural ceramics. In Guangdong, the province of ceramics in China, it is also one of the earliest enterprises to start large-scale research and development and design of hail ceramics. The leaders inspected Weimei Ceramic Tiles and also spoke highly of its corporate culture and technological innovation.

2. Weimei ceramic tile is also one of the top in China in terms of scale, with an independent freight terminal and three large-scale production bases in Guangdong. The China Museum of Architectural Ceramics is also located in 07 at the headquarters of Weimei Tiles. And set up a love ** association, which is helping children in poor areas every year and implementing positive energy.

3. Weimei Ceramic Tile has two major ceramic tile brands, and the ceramic tile category covers all types on the market, such as matte tiles, glazed tiles, microcrystalline stones, and polished tiles. The ceramic tile has a hard texture, delicate texture and rich patterns, and is exported to Europe, America and Southeast Asia and other countries and regions. Previously, it was the first ceramic tile for the construction of Olympic venues and World Expo venues.

To sum up: Weimei ceramic tile is now a domestic first-line ceramic tile brand, and it is also well-known abroad. In terms of price, there are many varieties and series, which can meet different customers, and it is a ceramic tile brand that reassures consumers.

Second, how to check the quality of ceramic tiles.

1. See if the size of the tile is accurate.

When you buy tiles, you must buy them in bulk, and we can randomly select a few tiles from them to measure the size to see if the real thing is consistent with the size of the description. Normally, it is normal for individual tiles to have an error of 1-2mm. However, if most of them are above this margin of error, then there is a problem with quality.

2. Look at the flatness of the tiles.

From the same batch of tiles, pull out two bricks and lean them against each other. If it is very close together. There will be no one high and one low, which means that the flatness is still good.

If there is unevenness, it will not only affect the appearance, but also be easy to crack in the case of thermal expansion and cold contraction. So, this point must not be sloppy.

Ceramic tile is a necessary building material for our decoration, there are many brands of porcelain limb bricks on the market, so what about the quality of ceramic tiles? Next, let's take a look at the relevant content introduction of tile quality!

How about the quality of the tile, distinguish 1, see whether the particles on the side of the tile are delicate and uniform: the particle body is large, the rough brick density is crisp and loose, and there will definitely be problems in the process of using spike liquid, for a simple example: when you get the house, it is generally a rough embryo room, and the walls are cement surface is very rough, when you use putty powder, the wall surface is relatively smooth and delicate, and you can use such a standard to see it.

How about the quality of ceramic tiles, distinguish 2, smoothness: if you buy polished tiles (more than 600 specifications of the floor tiles), touch the positive surface of the brick with your hand (touch the back of the hand), the smoother the starting feeling, the less pinholes on the surface of the brick, the higher the anti-fouling ability, as long as you don't have to worry about anti-slip problems in the bathroom or kitchen.

How about the quality of ceramic tiles, distinguish 3, look at the back and color of the brick: the general pure color is displayed as milky white (white), can not be blackened, can not be yellowed, the surface has black spots, black and yellow proves that the brick itself has impurities, impurities more than the density of the brick is more determined to decline, and it is easy to break and damage in the ordinary practical process. However, it is not okay to be too white, and excessive zirconium silicate will also produce radiation.

How about the quality of ceramic tiles, distinguish 4, listen to the sound: stand up the bricks, knock the bricks with your hands, the crisper the sound proves that the higher the density of the bricks, the better the quality, the duller the sound proves that the density of the tiles is worse, and the worse the anti-staining and durable ability of the tiles. How about the quality of the tile, distinguish 5, touch:

If you are buying antique bricks, you should also touch the front of the brick with your hands, feel whether the glaze on the brick surface is delicate with your hands, and then use your eyes to get close to the glaze and whether the particles of the glaze are rough. To buy antique bricks, we must pay special attention to the quality of the glaze, if you can, let the sales staff explain the production process of the glaze in detail, because the glaze is the life of the antique brick, and the color is the soul of the antique brick, so we must compare the home more in the color, see if the color is pure, and choose a product with a more pure color is basically OK.

How about the quality of ceramic tiles, distinguish 6, gloss: the same color to see the gloss of the surface of the brick, generally the earth tiles are placed on the large inclined board, there will be spotlights or fluorescent lamps on it, you have to look at the shadow of these bulbs on the surface of the brick (just like looking in the mirror), the clearer the shadow proves that the gloss of the brick is higher, the hardness of the brick is stronger, and the durability is higher, on the contrary, the blurred shadow of the bulb proves that the hardness of the brick is lower.

Note: I'm referring to polished bricks, and you must be the same color when you compare, you can't compare yellow bricks with white bricks, that's wrong. How about the quality of ceramic tiles, distinguish 7, thickness:

If you are buying porcelain tiles (wall tiles), you should look at the thickness of the glaze between the side of the brick body and the glaze, which is too thin to want, because there will be fracture or staining after a long time. Then look at whether the glaze on the surface of the porcelain tile is bright, and the glaze is bright and of good quality.

How about the quality of the tile.

1. When buying tiles, you can weigh the selected tiles a little to see what their weight is, not too light, otherwise it will affect the quality of construction. For example, the size of the tile is 800 800mm, the weight can reach about 15kg.

2. The higher the hardness of the selected tile, the higher the wear resistance. At this time, you can use keys or other hard objects to scratch a little on the surface of the tile to see that the construction will produce scratches, and the *** tile will not be affected.

3. Observe the surface gloss of the tile, if the gloss is higher, the better its quality. At the same time, the four sides of the tile can not have flaws, otherwise it will affect the quality of the tile, and it is easy to bring unnecessary trouble in the later stage.

4. Gently tap the surface of the tile, if it makes a crisp sound, it means that the quality of the tile is OK, and if it will make a dull sound, then you should pay special attention to it, the quality of the tile must be problematic.

5. When buying ceramic tiles, you also need to see whether there are pinholes on the surface of the tiles, if there is, it means that the ceramic tiles have not been dried, and the surface is easy to be contaminated with dust and is not easy to clean. The method of judging can be drawn on the tile to see if it can be cleaned up.

In life, ceramic tiles are needed in the decoration of the home, and the quality of the tiles will directly affect the overall effect of the home decoration in the future. Therefore, it is very important to buy your own tiles strictly. Currently, there are many brands of tiles on the market.

What about usHow to identify the *** bad of tiles

First, how to identify the best bad ceramic tiles.

1. Observe the appearance of the tiles.

To see if the surface finish and flatness of the tile are good, the rules and the surrounding pattern are complete, we can take four or five tiles to observe, to see if there is a color difference, edge deformation or missing corners and other defects.

2. Listen to the sound.

Gently pat with a hard object. If the sound is clear, then the *** of the tile. You can also grab the corners of the tiles with your fingers and hang them easily.

Then, use your right index finger to touch the center part of the tile. If the sound is clear and pleasant, the quality is good. For example, the voice is deaf and hoarse.

If there is a "click" in the deactivated sound, there is a crack in the brick. Therefore, ceramic tiles are also suitable for installation and construction, and the installation effect is also very beautiful.

3. The drip irrigation test is early.

You can put some water and place it on the back of the tile to see how quickly the water soaks in. In general, the slower the water absorption, the denser the tile; In other words, if the water is absorbed quickly, the density of the tile is low, so the higher the density, the better the quality of the tile.

How to identify the *** bad of tiles？-Quantity.

Whether the size is standard is the key to judging the advantages and disadvantages of ceramic tiles. Use a tape measure or ruler to measure the width of the four sides as well as the diagonal and thickness of the tiles. If the precision of the tile length is higher, the effect after paving will also be greater.

The best thing is that branded tiles are not only easy to make, but also save construction time and the use of accessories.

You can get it for free