Can the DJI 4 drone fly without a network?

If you have logged in to DJI GO DJI Go4 before using it, you do not need to use the Internet environment during the flight.

1.If you need to load map information in real time.

2.If you need to use the live streaming feature.

3.If you need to synchronize flight data.

Hello, there are two possibilities:1If you are a new machine, it means that you have not turned off the novice mode, DJI Genie has the protection of the novice mode, and you need to switch it in the djigoapp, without turning it off, take the Phantom 3 as an example:

In the Novice mode, the Phantom 3 has a flight radius of 150 meters, and after reaching 150 meters, the aircraft will automatically hover, and the flight speed will be limited accordingly. 2.If you turn off the novice mode and can only fly 120 meters, that is, you are in the altitude limit column, you do not enter a higher value, the default seems to be 120 meters, you need to fill in your ideal altitude in the box --- the height limit on the drone settings page (it is recommended that you comply with relevant local laws and regulations when flying in China, and do not blindly pursue altitude to avoid danger, it is recommended to be within 300).

Check whether the aircraft firmware has been successfully upgraded to the latest firmware, if not, it is recommended that you upgrade to the latest version；Whether the channel settings of the aircraft have been selected as automatic selection; Reset the camera parameters of the aircraft; Try changing your flight environment, flight or mobile device.

Workflow: 1. Start interface: quickly realize the planning of the task, enter the task monitoring interface, realize the rapid and automatic archiving of the aerial photography task, divide the functions, and realize the singleness and stability of the software operation.

2. Pre-flight inspection: In order to ensure the safety of the mission, automatic detection is carried out in combination with flight control software before take-off to ensure that the GPS, compass, airspeed tube and pitch roll of the aircraft are in good condition, so as to avoid the occurrence of dangerous situations in aerial photography.

3. Flight mission planning: planning of flight missions in three modes: regional aerial illumination, navigation and hybrid.

4. Flight monitoring: real-time grasp of the aircraft's attitude, azimuth, airspeed, position, battery voltage, real-time wind speed and direction, task time and other important states, so as to facilitate the operator to judge the executability of the task in real time and further ensure the safety of the task.

5. Image stitching: After the aerial photography task is completed, the navigation aerial images are used for image stitching in the study area.

Policies and regulations

1. Civil unmanned aerial vehicles shall be engaged in operational flights in industry, agriculture, forestry, fishery, mining, and construction, as well as flight activities in areas such as medical and health care, emergency rescue and disaster relief, meteorological exploration, marine detection, scientific experiments, remote sensing surveying and mapping, education and training, culture and sports, and tourism.

2. Civil drone activities and their air traffic management shall comply with relevant laws and regulations, including the Civil Aviation Law of the People's Republic of China, the Basic Flight Rules of the People's Republic of China, the General Aviation Flight Control Regulations, and the rules of the Civil Aviation Administration.

3. Units and individuals organizing and implementing civil unmanned aerial vehicle activities shall apply for the designation and use of airspace in accordance with the "General Aviation Flight Control Regulations" and other provisions, accept flight activity management and air traffic services, and ensure flight safety.

Hello dear<>

The answer you are looking for: The DJI drone cannot connect to the mobile phone, you can follow the steps below to troubleshoot and solve:1

Confirm the connection method between the mobile phone and the drone: The DJI drone can be connected to the mobile phone through wireless network or Bluetooth, you need to confirm whether the connection method is correct, choose the appropriate connection method and try again. 2.

Check the signal strength of your phone and drone: if the signal strength is insufficient, it will also cause the connection to fail. You can try adjusting the position of your phone and drone, or change to an environment with better signal strength and try again.

3.Check your phone's and drone's network settings: If your phone or drone has a firewall or restricted access network settings, it will also cause the connection to fail.

You can check the options in the network settings of your phone and drone, turn off the firewall, or add the drone's IP address to the trust list. 4.Check the firmware version of your phone and drone:

If the firmware version of your mobile phone or drone is too low or too high, it will also cause the failure of the Royal Rental Zheng connection. You can update the latest firmware version on DJI's official website and follow the official prompts. 5.

Restart your phone and drone: Sometimes simply restarting your phone and drone can also fix the connection issue. You can try turning the phone off and on, or turning the power switch on your phone and drone off and on.

If none of the above methods can solve the problem, it is recommended that you contact DJI's official customer service or after-sales service center for consultation and handling.

Summary. (1) If the remote controller is not connected to the aircraft normally, please re-link it;

2) If the gimbal camera self-test is abnormal after turning on the device, please check whether the cable between the gimbal and the aircraft is off or damaged;

3) If there is no image transmission after the firmware upgrade, please make sure that the firmware versions of the remote controller and the aircraft have been successfully upgraded.

4) Try to select "Reset Camera Parameters" in DJI GO 4's camera settings.

5) Go to the HD video transmission settings interface of DJI GO 4 to check the channel quality of the video transmission, if the channel quality is poor, please change the flight site.

6) Try to change the SD card to see if it is caused by an abnormality in the SD card.

7) If the aircraft is not transmitted after the collision, it is recommended to send the aircraft back for testing through self-service repair. I hope mine can help you, I wish you a happy life, please give a thumbs up, thank you.

DJI Phantom 4 drone, how to solve the problem without image transmission, and there is no response to the mobile terminal connected to the drone.

Dear, the following situations may cause the APP to prompt "no image transmission signal" (1) If the remote controller and the aircraft are not connected normally, please re-link; 2) If the gimbal camera self-test is abnormal after turning on the device, please check whether the cable between the gimbal and the aircraft is off or damaged; 3) If there is no image transmission after the firmware upgrade, please make sure that the firmware versions of the remote controller and the aircraft have been successfully upgraded. 4) Try to select "Reset Camera Parameters" in DJI GO 4's camera settings. 5) Go to the HD video transmission settings interface of DJI GO 4 to check the channel quality of the video transmission, if the channel quality is poor, please change the flight site. 6) Try to change the SD card to see if it is caused by an abnormality in the SD card. 7) If the aircraft is not transmitted after the collision, it is recommended to send the aircraft back for testing through self-service repair. I hope mine can help you, I wish you a happy life, please give a thumbs up, thank you.

The firmware upgrade plugged in the mobile terminal did not respond.

Yes, I hope mine can help you, I wish you a happy life, please give a thumbs up, thank you.

How to fix it. You first check if there are any of those conditions I sent you, and if it really doesn't work, you have to send the aircraft back for testing by yourself. I hope mine can help you, I wish you a happy life, please give a thumbs up, thank you.