There was a rustling sound in the Sennheiser headphones, and one of the Sennheiser headphones sudden

Plug the headphones into other mobile phones or *** for audition, if it is still so, the headphones are damaged, and it is recommended to return to the factory for repair.

If it is not a headset problem, it will be handled as follows:

1.If the sound quality of the audition song is too low, it will be difficult to hear and break.

3.The headphones are not compatible with the phone, resulting in a situation where the human voice is floating and the melody is expansive.

If you didn't say that the left and right ears are different, I will tell you directly that the earphones are not on.

The personal AKG K450 also has abnormal sound in the 30Hz 23KHz burn-in stage, but it is not serious, and there is no problem with the sound pressure in this frequency band, which is not large, and it is manifested in picking musical instruments, for example, the abnormal sound of 23KHz is only available in**music box**. The 30Hz heterophony is manifested in individual drums and very hoarse horns that are played at the beginning of the epic war, and the name of the instrument is unknown. The abnormal sound in the bass stage disappears after 200 hours, and the high frequency is still there for 400 hours.

You can make a reference.

But if you don't have the left ear and the right ear, it's really worth thinking about, and the big factory is not without flaws. It is recommended that you go to the headset altar and ask.

Don't ask for an experienced one to judge you.

Summary. Dear, the result you get here is: If one of your Sennheiser headphones suddenly does not ring, it may be one of the following reasons:

1.Poor contact of the headphone plug: It may be that there is an impurity or dirt between the plug and the headphone jack, resulting in poor contact.

You can clean the plug and jack, or try replacing the plug. 2.Headset line failure:

There may be an open circuit or short circuit in some part of the headset line, causing the headset to not work properly. Various parts of the headset line can be inspected, faulty points can be found and repaired. 3.

Headset unit failure: The headphone unit may be faulty, causing it to not work properly. The headphones can be sent to a professional repair center for service and repair.

It should be noted that the above situations need to be carefully checked and judged to ensure that the cause of the fault is correctly identified and repaired. If you are not familiar with headphone repair, it is advisable to seek professional help.

Good. Dear, the result you get here is: If one of your Sennheiser headphones suddenly does not ring, it may be one of the following reasons:

1.Poor contact of the headphone plug: It may be that there are impurities or dirt between the plug and the headphone jack, resulting in poor contact.

You can clean the plug and jack, or try replacing the plug. 2.Headset line failure:

There may be an open circuit or short circuit in some part of the headphone line, causing the headset to not work properly. Various parts of the headset line can be inspected, faulty points can be found and repaired. 3.

Headset unit failure: The headphone unit may be faulty, causing it to not work properly. The headphones can be sent to a professional repair center for service and repair.

It should be noted that the above situations need to be carefully checked and judged to ensure that the cause of the fault is correctly identified and repaired. If you are not familiar with headphone repair, it is advisable to seek professional help.

The headphones have sound while not doing anything.

Generally, the cord at the plug is broken. Several of my headphones are broken like this. Find a maintenance master to fix it. If the joint warranty. Send it to Senhai.

Go back and plug it in on another device and try it.

It may be that the wire is broken or the internal solder joint of the earphone is open, and the possibility of horn damage is less.

Internal** or the end of the line is the end of the line The worst is that the unit is broken and returned to the factory.

Repeatedly twisted, and then the wire broke, presumably next to the plug.

Why does Sennheiser CX+PLUS have a rustling sound in one ear?

Sennheiser CX+PLUS single ear why there is a rustling sound Hello dear, plug the earphones into other mobile phones or spare parts*** for audition, if it is still like this, the earphones are damaged, it is recommended to return to the factory for repair. If it is not for the problem of ear jujube virtual machine, the problem is dealt with as follows:1