How to distinguish between color steel plate and aluminum plastic panel, the difference between meta

Aluminum-plastic panels. It is self-evident that the color steel plate has its own advantages and disadvantages.

For example, the aluminum-plastic panel is rich in color, the surface is smooth, and the construction technology is mature; The color steel plate is easy to rust, the surface treatment is rough, and the color effect is poor.

Color steel plate is used to make roofing, partition wall partitions, industrial plants and warehouse facades and other locations are quite suitable, low cost, convenient construction, and can be applied in large areas, while aluminum-plastic panels can not be used in such a large area.

On special occasions, resistant to wind pressure.

In terms of strength such as impact resistance, aluminum-plastic panels still have some advantages.

Of course, there is also a difference between the two in the working method, the indoor partition generally adopts the horizontal way of the mother and son buckle, and there is a profile card edge fixed up and down, and the outdoor construction is fixed if it is simply fixed on one side, which will inevitably leave potential safety hazards.

Fix on both sides, then the nail cover will be left exposed.

The commonly used paste of aluminum-plastic panel can have line decoration grid, which is easy for everyone to accept, even if the dry hanging construction, then the screw nail cap can not be seen outside, and the surface is very uniform and smooth.

The idea of completely replacing aluminum-plastic panels with color steel plates can promote color steel plate manufacturers to increase research and development in coating process, sandwich material selection, and composite bonding materials. In order to realize the advantages of the aluminum-plastic panel products themselves: the expression effect is decorative, thermal insulation, moisture-proof and soundproof function, and weather resistance.

and construction technology, etc.

Color steel plate: It is a color coated roll made of baking paint on the surface of galvanized sheet.

Aluminum-plastic panel: It is a kind of decorative panel.

The double side of the sandwich core is aluminum plate.

Plastic plates are clamped in between.

As a new type of decorative material, aluminum-plastic composite panel (Yuanbei, also known as aluminum-plastic panel) has been introduced to China from Germany since the late eighties and early nineties of the last century, and has been rapidly favored by people for its economy, diversity of optional colors, convenient construction methods, excellent processing performance, excellent fire resistance and noble quality.

The unique properties of the aluminum-plastic composite panel itself determine its wide range of uses: it can be used for building exterior walls, curtain wall panels, renovation and renovation of old buildings, interior wall and ceiling decoration, advertising signs, display stands, purification and dust-proof orange destruction projects. It belongs to a new type of building decoration material.

Abstract: Hello, aluminum plate is pure metal, aluminum composite panel is only the surface layer is metal (the surface metal is treated) and the middle layer is polyethylene plastic. In the case of the same thickness and specifications, the aluminum plate is heavier than the aluminum-plastic panel, and the general aluminum plate is also higher than the aluminum-plastic panel. The aluminum veneer to see, polyester or fluorocarbon, aluminum material, processing drawings, is n normal flat plate in about 250, aluminum-plastic panel the same, to see the thickness of aluminum, the type of plastic, etc., normal interior wall panel 40 yuan a square, exterior wall 100 yuan per square aluminum plate and aluminum-plastic panel installation is the same, but the aluminum plate is processed and formed to the construction site, and the aluminum-plastic panel is processed and formed after the construction site, and the aluminum-plastic panel manufacturers generally have.

The difference between metal sheet and aluminum-plastic panel.

Hello, dear, I'm glad to answer for you, I have received your question, and I am sorting out the information for you, and I will reply within five minutes, please be patient

Hello, aluminum plate is pure metal, aluminum composite panel is only the surface layer is metal (the surface metal is treated) and the middle layer is polyethylene plastic. In the case of the same thickness and specifications, the aluminum plate is heavier than the aluminum-plastic panel, and the general aluminum plate is also higher than the aluminum-plastic panel. The aluminum veneer to see, polyester or fluorocarbon, aluminum material, processing drawings, is n normal flat plate in about 250, aluminum-plastic panel the same, to see the thickness of aluminum, the type of plastic, etc., normal interior wall panel 40 yuan a square, exterior wall 100 yuan per square aluminum plate and aluminum-plastic panel installation is the same, but the aluminum plate is processed and formed to the construction site, and the aluminum-plastic panel is processed and formed after the construction site, and the aluminum-plastic panel manufacturers generally have.

<> "Aluminum-galvanized sheet and color steel plate are two commonly used plates, and the effect brought by them is slightly different, so it is necessary to distinguish them in advance to facilitate the purchase in the later stage. So what are the differences between aluminum-galvanized sheet and color steel plate?

1. What are the differences between aluminum-zinc plate and color steel plate?

1. From the appearance of the material. Aluminum-zinc sheet is a unique style formed by aluminum-zinc alloy. The branches and color steel plates are colored.

2. From the point of view of performance. Aluminum-galvanized steel sheet is an important alloy material often used in daily life. Aluminum-galvanized steel plate is composed of aluminum-zinc alloy structure.

Color steel plate refers to color coated steel plate. The surface of the prepainted steel sheet is an organically coated material. It has the advantages of good corrosion resistance, bright color, and simple processing.

Second, what need to be paid attention to in the purchase of color steel plates

1. Pay attention to the trailing edge of the color steel plate.

In the process of buying color steel plates, you need to see whether there are fine crystals around it, if there is ash and black, it means that the quality is not good.

2. Pay attention to the thickness of the substrate and the thickness of the coating.

The color steel plate is composed of the base steel plate and the color peritoneal layer, so we must pay attention to the thickness of the underlying substrate and the thickness of the lining when purchasing. Generally, the thickness of the color steel plate of good quality is between, and the thickness of the peritoneal layer is below.

3. Listen to the sound.

When buying color steel plates, you can also touch the color steel plates with your fingers or hard objects to hear the sound. Generally speaking, the sound emitted by the color steel plate with the best materials will be brighter and clearer.

4. Many factories and some large workshops will use it, because its weight is relatively light, used as a partition wall, the installation is relatively simple, and the whole construction period can be shortened by more than half. The color steel plate has a certain thermal insulation effect, and using it to make a workshop will bring a certain thermal insulation effect, and it will not be as stuffy as other materials.

Summary: There are many details that need to be paid attention to in the purchase of color steel plates, and try to cooperate with big brands, and the quality of the products given will be better.

Aluminum-plastic panel is a new type of decorative material.

The aluminum-plastic panel is composed of multi-layer materials, the upper and lower layers are high-purity aluminum alloy plates, and the middle is a non-toxic low-density polyethylene (PE) core board, and a protective film is pasted on the front. For the exterior, the front of the aluminium composite panel is coated with fluorocarbon resin (PVDF), and for the interior, the front side can be coated with non-fluorocarbon resin.

Aluminum-plastic panels are made by a special process, and have the advantages and characteristics of polyethylene and aluminum, with good moisture resistance, fire resistance and sound insulation, and corrosion resistance and impact resistance, and are often used in architectural decoration.

Aluminum-plastic panels.

It is composed of two materials (metal and non-metal) with completely different properties, which not only retains the main characteristics of the original composition materials (metal aluminum, non-metallic polyethylene plastic), but also overcomes the shortcomings of the original composition materials, and then obtains many excellent material properties, such as luxury, colorful decoration, weather resistance, corrosion resistance, impact resistance, fire prevention, moisture resistance, sound insulation, heat insulation, and earthquake resistance.

Light weight, easy processing and molding, easy handling and installation. Therefore, it is widely used in various architectural decorations, such as ceilings, columns, counters, furniture, kiosks, elevators, storefronts, billboards, plant wall materials, etc., and has become the representative of the three major curtain walls (natural stone, glass curtain wall, metal curtain wall) metal curtain wall.

In developed countries, aluminum-plastic panels are also used in the manufacture of buses and train cars, soundproofing materials for airplanes and ships, and the design of instrument boxes.

1.Different materials: Aluminum-plastic panels are made of aluminum sheets and plastics, while plastic panels are made of pure plastic.

2.Different strength: aluminum-plastic panel is supported by aluminum, which has high strength and stability; The plastic sheet is more fragile and easy to deform or crack.

3.Different durability: aluminum-plastic panels have a long service life and are not susceptible to oxidation or corrosion; The plastic plate is susceptible to oxidation and the disturbance of Zixun Li Yuan's outer line, and is easy to age and embrittlement.

4.Different uses: aluminum-plastic panels are more suitable for building curtain walls, billboards, signs, etc., while plastic panels are suitable for advertising backsheets, body advertisements, etc.

5.Different: Aluminum-plastic panels are higher than plastic panels, but they are more guaranteed in terms of service life and quality.