Why is the upload speed of telecom fiber broadband only tens of K?

The broadband of a few meters and the speed of the ** are 2 different concepts. For example, the speed of 1m is 1024k, and the unit here is bytes, that is to say, the speed of 1m is equal to the byte of 1024k.

The operator's broadband of several mbits, the unit is bits, that is, 10m broadband actually refers to 10m bits, which are also 10*1024k bits.

Regarding the issue of upload speed, netizens have also discussed it before, and the reason for not opening the upload rate may be that one is to prevent transparent transmission, and the other is that the uplink channel bandwidth is a resource, which may be reserved for future ** service use, just like spectrum planning, it is only a personal opinion, and does not represent an official reply.

Why is the telecom advertising only vaguely marked 12 megabytes of bandwidth (in fact, it is only the ** rate, the upload rate is still a megabyte), I and other users have never seen any telecom's written text information to indicate what the upload rate is, this telecom should be a violation of the user's right to know, right?

Could it be that the telecommunications deliberately control the speed? What are the benefits of this for telecommunications itself?

1. For LAN or FTTH access broadband users:

1) Broadband with a downlink rate of less than or equal to 4Mbps and an uplink rate of 512kbps;

2) For broadband with a downlink rate greater than 4Mbps but less than 20Mbps, the uplink rate is 1Mbps;

3) For broadband with a downlink rate greater than or equal to 20Mbps but less than 100Mbps, the uplink rate is 2Mbit/s;

4) Broadband with a downlink rate equal to 100Mbps and an uplink rate of 4Mbps.

5) Broadband with a downlink rate equal to 200Mbps and an uplink rate of 10Mbps.

2. For the broadband accessed by ADSL ADSL2+ VDSL, the uplink rate is 512Kbps.

The broadband upload speed is 5124kbps, which is normal.

The uplink rate of M-below competitors is 512 kbps.

The uplink rate of M, 10M, and 12M/s competitors is 1 Mbit/s.

The uplink rate of M-band users is unified to 2 Mbit/s.

Slow broadband solution:

1. Does your cat's link light flicker frequently.

I believe that many people have found that the ink light of the cat is always flashing when the network is normal. If you find that the ink light in your home is not flashing, you should pay attention to see if it is energized, or if the wires are faulty, and then repair it.

2. Whether the cat is overheating.

When the cat has been working for a while, it will get hot. At this time, you can touch it with your hands to see if it is too hot, if this is the reason, you should pay attention to dissipating heat. You can make a shelf for your cat, because it will not only help it receive the signal, but also dissipate heat, isn't it the best of both worlds?

3. Restart the cat.

When the cat is used for a period of time, there may be a problem of disconnection, but the situation is generally caused by the poor quality of the cat. At this time, you can disassemble and turn off the cat's power button, restart it and see if the problem can be solved. <>

The broadband upload speed is normal to ADSL4M, 6M, 8M, 10M, 10M, 10M, 10M, 100M, 100M, and there will be faster 1GB of fiber in the future.

Our so-called width installation bandwidth refers to the speed of your computer to the operator's computer room, so when we look at the quality, we mainly look at the width access speed, long-distance network speed and web page opening speed reflect the interconnection between your home broadband and other broadband service providers.

As well as the interconnection with the servers of Internet companies, to take a popular example, it is like your home is a highway, and your friend's house is a rural road, so that the speed of the two highways does not match, which will lead to a slower traffic jam, which is the so-called interconnection problem.

Precautions: 1. Back up the registry in time, and restore it in time when there is an abnormal situation.

2. Reduce the occupation of system memory, you can observe the system tray area in the lower right corner, if a long list of key cavity search icons appears, you need to optimize appropriately.

3. Regularly defragment the research, such as defragmenting the disk, to speed up the hard disk.

4. Do not access bad programs that contain malicious programs to avoid being modified to the registry and homepage. If you accidentally modify it for a while, you can use Super Free Round Year and 360 Security Guard to deal with it.

5. Do not easily open the attachments from unknown sources in the mailbox and QQ, so as not to get into the Trojan manuscript history or viruses. <>

Hello! Hopefully, the following will be helpful to you.

Anhui Telecom currently promises that the broadband above 8M guarantees a minimum uplink bandwidth of 4M, a maximum speed of 20M** seconds, and an upload of 512k seconds (this is the lowest value, under the premise that the equipment conditions in some areas allow, the uplink and downlink are equal) You can test the broadband on the speed test page of the business hall on the Anhui Telecom website.

Telecom iphone6 full Netcom, officially launched on October 17, immediately through the Anhui Telecom online business hall to make an appointment to deposit 100 to get 400 (only for contract purchases)! For more exciting content, please pay attention to the announcement of the online hall.

The theoretical uplink rate of 100M broadband is 30M.

The uplink bandwidth is the uplink rate, which generally refers to the speed at which others can communicate from your computer.

ADSL (Asymmetric Digital Subscriber Loop) technology is a technology that realizes broadband access interconnection with asymmetric digital subscriber lines.

As a transport layer technology, ADSL makes full use of the existing copper line resources to provide a bandwidth of 640kbps uplink (1Mbps theoretical uplink) and 8Mbps downlink on a pair of twisted pair cables, thus overcoming the traditional user's demand"The last mile"of"Bottlenecks", to achieve broadband access in the true sense.

Dear Telecom users, Hello! Welcome to China Telecom products, the uplink and downlink rates of optical fiber are the same. 100*1024 8=12800kb s i.e.

If the above information does not solve your problem, you can log in to the online business hall of China Telecom** or call 10000 to wish you a happy life.

100m is the maximum value of the theoretical transmission rate Uplink and downlink simultaneous transmission, adding up to a maximum of 100M, is not exactly 50 uplink 50 downlink can go up 80 downlink 20 . You can set this data yourself! Thank you for the little comments.

The uplink and downlink rates of the fiber are the same. 100*1024 8=12800kb s i.e.

Hello! The uplink speed of broadband is generally limited according to local regulations, depending on local regulations, so we recommend that you directly contact the customer service of your local carrier.