The computer is turned on on the English page How to enter the normal page

Summary. Hello, dear. After the computer is turned on, it enters the interface that is all in English, and the solution is as follows:

1.Check the language settings: In the Windows operating system, you can check if the language and region options in the settings are set correctly.

If it's English, you can change it to your desired language. 2.Restart your computer

Sometimes, for various reasons, your computer doesn't display the language correctly when it starts up, and restarting your computer may fix the problem.

Hello, dear. After the computer is turned on, it enters the blocking interface that is all in English, and the solution is as follows:1

Check the language settings: In the Windows operating system, you can check whether the language and region options of the chain in the settings are set correctly. If Sun Guo is in English, you can change it to your desired language.

2.Restart your computer: Sometimes, for various reasons, your computer doesn't display the language correctly when it starts up, and restarting your computer may resolve the issue.

Hello, dear dear. Extended Material: 3

Use the recovery option: Many computers come with a recovery option that you can use to restore your system to the most recent available state. 4.

Change BIOS settings: BIOS is the first programming language when a computer boots up, and it can also be the cause of problems with the settings due to rounded limbs. You can try pressing the F12, F2 or Delete keys to access the BIOS settings and change the language options.

5.Reinstall the operating system: If none of the above works, you can try reinstalling the operating system by making sure you select the correct language and region during the installation process.

When the computer boots up, the English interface should be put on the hard disk, and there is a problem with the boot sector of the hard disk, or there is no operating system installed in the hard disk.

You can check in the BIOS first, and whether you can find the hard disk in the BIOS. If you can't find the hard drive in the BIOS, it may be that the hard drive is broken. If you can find the hard disk in the BIOS, set the optical drive to boot, put the system disk in the optical drive, and reinstall the system.

The motherboard BIOS is dead, or the BIOS settings are incorrect. I can't remember the hard drive information, if your system date is incorrect, it is probably the reason.

Replace the BIOS battery and re-enter the BIOS to test the hard drive. The hard drive is faulty and may need to be replaced. Force restart three times, and reinstall the system if it works. If it doesn't work, it's usually a hardware problem, and you can only repair it.

Ways to avoid errors in computer systems:

Windows system restore point is a built-in tool with strong reliability,And in win7,8,Ruler Sakura 10 are equipped with more than that。 Moreover, after configuring it once, the system restore point will automatically set the restore point when you may cause system damage, so you don't have to set it up yourself, and it takes up very little space, which is much more convenient than ordinary backup and restore. And because it is a system tool, it is also more reliable and easy to use.

Operating system language settings: Your operating system is set to the English language. To change the operating system language, you can follow these steps:

On Windows, click on the Start menu, select Settings (or Control Panel), and then select the Time and Language (or Region and Language) option. In the language settings, select the language you want to set as the default language. Restart your computer and the system will start in the language of your choice.

BIOS settings: Sometimes, the BIOS settings of your computer may also be in English. To change the BIOS setting language, you can follow these steps:

Restart the computer and press the corresponding button (usually F2, F10, Delete, etc.) to enter the BIOS settings interface when the computer is turned on. In the BIOS settings screen, find the language option and set it to the language you want. Save the settings and exit the BIOS interface, and the computer will boot up in the language of your choice.

Virus or malware: Sometimes, the English interface of the computer may be due to a virus or malware. In this case, it is advisable to conduct a full scan of the antivirus software to ensure the security of the system.

What's going on.

Your operating system is set to the English language. To change the operating system language, you can follow these steps: On Windows, tap the Start menu, select Settings (or Control Panel), and then select the Time and Language (or Region and Language) option.

In the language settings, select the language you want and set it as the language of the Silent Meditation Meditation. Restart your computer and the system will start in the language of your choice. BIOS Settings:

Sometimes, your computer's BIOS settings may also be in English. To change the BIOS settings language, you can follow these steps: Restart the computer and press the corresponding keys (usually F2, F10, Delete, etc.) to enter the BIOS settings interface when the computer is turned on.

In the BIOS settings screen, find the language option and set it to the language you want. Save the settings and exit the BIOS interface, and the computer will boot up in the language of your choice. Virus or malware:

Sometimes, the English interface of the computer may be due to the coincidental influence of viruses or malware. In this case, it is advisable to conduct a full scan of the antivirus software to ensure the security of the system.

Dear, hello, I'm glad to answer for you: the laptop is powered on and the upgrade is destroyed with the jump out of the English interface, and the answer is dear and dear 1, you can press F8 to enter the advanced mode of the notebook, after entering the advanced mode, select the latest correct configuration, and then click OK, if the problem is not big, it should be able to solve the problem. 2. If the above methods still can't solve the problem, press F8 to enter the safe mode of the notebook, enter the safe mode to repair, after entering the safe mode, first of all, the computer should be disinfected to see if it is a virus, and then run the fault repair to see if some programs are wrong; Open the back cover of the laptop and reinsert the memory; Use a USB flash drive to reinstall the system; The drive system will come into play, and the computer will be back to normal; If none of the above methods can solve the problem, it is recommended to bring the computer and warranty card to the designated maintenance point for professional staff to test and repair.

1. Turn on the device without pressing the del key, set the BIOS, restore the default settings to save and exit, select Load optimized defaults, F10 save and exit.

2. The cause of the problem is a business trip to the memory module.

Or graphics card cheats.

Oxidation or poor contact of the slot leads to the computer boot without the cherry blossom method. Solution: You can turn off the power first, open the computer case, dial out the memory module, use the eraser to wipe the part of the gold finger (that is, the place where there is a copper sheet) back and forth a few times, and then insert a memory slot back, and you're good to go.

3. Turn on and press F8 without stopping, enter Advanced, select the last correct configuration, and OK.

Summary. Hello, dear, the computer boot appears that the English can not enter the interface is the system is damaged, the phenomenon of boot failure. You need to press and hold F8 after restarting.

Oxidation of the gold finger of the memory module or graphics card or poor contact of the slot causes the computer to fail to boot up. Or if there is a problem with the graphics card, it is recommended to replace the graphics card. Use the shortcut keys to restart while pressing :

Alt + Ctrl + Delete to restart. When the computer restarts, while holding down the F8 key on the keyboard, the computer will enter the advanced boot options, this step uses the up and down keys of the keyboard to select "Last correct configuration (advanced)". If there is no major problem, the computer will enter the system.

Hello, dear, the computer boot appears that the English can not enter the interface is the system is damaged, the phenomenon of boot failure. You need to press and hold F8 after restarting. Oxidation of the gold finger of the memory module or graphics card or poor contact of the slot causes the computer to fail to boot up.

Or if there is a problem with the graphics card, it is recommended to replace the graphics card. Use the shortcut keys to restart, and press Alt + Ctrl + Delete on your keyboard at the same time to restart.

Restart the computer while holding down the F8 key of the keyboard, the computer will enter the advanced boot options of the Sharp Difference Core, this step with the keyboard branch up and down keys, select "the last Qing Han once the correct configuration (advanced)". If there is no major problem, the computer will enter the system.

Dear,If the computer boots up, if there is a virtual text in the English code can not enter the interface, first of all, we Chi Chan Ran can try to restart the computer,Here use the keyboard shortcut "alt+ctrl+delete",Then when the computer restarts,Keep holding down the F8 button,The computer will enter the high level of startup。 At the end of this cleansing, we select "Last correct configuration (Advanced) so that the computer will boot up normally."