What is the quality of the film guest glass film? How to distinguish the authenticity of the film cu

When my home was just renovated, I didn't understand the use of glass film at that time, but also to save money directly bought online glass window film to the bedroom window pasted, used for about 3 months, the glass window blistered, ugly affect the beauty not to mention, when the sun is big, the film has a plastic smell, the room is slowly better after ventilation. Then I checked the harm of some inferior films on the Internet and suddenly realized it, and then there was an offline promotion of the glass film of the film customer at the entrance of the community, and I went to the field to test and experience the glass film of the film customer. Only then did I know that the glass film is used for so many purposes, not only for heat insulation and sun protection, but also for strong safety performance, as well as privacy protection function.

After that, I decisively changed the film guest glass film for more than a year now, there have been no problems, the heat insulation effect is also obvious in summer, and the light in the room is not dazzling when the sun is big. So if you choose glass film, then choose film customer.

Automotive glass film evaluation: 1, this car sun film generally sticks once and does not need to be replaced with hail, the car film is generally guaranteed for 10 years or 15 years, only the vacuum magnetron sputtering film can do this, and the garbage film is difficult to do this, the vacuum magnetron sputtering film does not have any chemical additives, will not fade, no peculiar smell, high definition, good explosion-proof and thermal insulation performance, super stable performance, the film does not need to leave a big triangle, protect the privacy of the owner in the car, will not blister and crack;

2. If it is a garbage film, it may take a summer to replace it once, because the garbage film cannot be used once it is exposed to the sun in summer;

3. Some fade, some blister, and not heat insulation at all, can emit formaldehyde and benzene and other toxic not to mention unclear, when driving the vision is blurry and very dangerous;

4. How often to change the car film mainly depends on the quality of the car film you call Yufan car film, if it is a brand sun film, it is not easy to blister when pasted, and it is generally replaced after the film is aged, scratched and blistered. It is unrealistic to replace it once a month, and it can not bear it in the economy, and the general vehicle is hundreds of pieces of film at a time, and the high-gear point is thousands, but it can be used for several years. The warranty period is up to 10 years for the Amber Optical Ceramic series and 5 years for the Metal series.

The warranty period of amber optical nano ceramic heat insulation film can be said to be relatively long, and the general automobile explosion-proof film does not dare to promise so long.

Millions of car purchase subsidies.

Nowadays, many home and office areas are pasted with film customers to upgrade glass film, and it is necessary to learn to distinguish the authenticity. To distinguish the authenticity of the glass film from the following points:

1.Brand logo. The brand logo of the film customer in English is: moker

2.Clarity of the film. The light transmittance of the high-quality film can be as high as 89%, for example, the light transmittance of the film customer S1400 upgraded glass film is as high as 89%, and the items outside the window can be clearly seen even at night, while the inferior film will have a foggy feeling;

3.The feel of the film. **The film has a thick and smooth feeling when touched by hand, while the inferior film feels thin and brittle, and is easy to wrinkle;

4.The color of the membrane. The membrane of the film is made of metal magnetron sputtering process, without adding dyeing agent, not easy to change color, and the color is pure;

5.The taste of the membrane. Fake and shoddy films will have adhesive layer residues, high benzene content, peculiar smell, and will seriously endanger health;

6.The shelf life of the membrane. The shelf life of the membrane is ten years, and the warranty is ***. At the same time, you can go to the official website to check the warranty and whether it is **.

Heat insulation, sun protection, anti-theft, energy saving, environmental protection, explosion-proof, privacy protection, but also anti-theft, should also be able to extend the service life of some ornaments at home, I know it, you can check it on the Internet yourself.

There are a lot of advantages, let me list them for you:

1. Energy saving. It can block 65%-80% of the sun's thermal energy in summer, and save indoor temperature in winter to help you save electricity.

2. Anti-ultraviolet rays. Isolate more than 99% of ultraviolet rays, prevent tanning and sunburn, and prevent curtains, furniture, carpets, etc. from fading, 3. Explosion-proof. The tension resistance of the safety film per square centimeter is as high as more than 2000 kilograms.

4. Anti-theft. The effect is particularly good, and the gold cabinet or bank counter should be pasted with glass film.

5. Anti-shattering. The strength of the film glass is 5-20 times that of ordinary glass, and it is completely splash-proof to meet the safety glass standard.

6. High temperature prevention.

7. Block glare from glare. It has the unmatched sunlight control of curtains to reduce light pollution.

8. One-way perspective. Create an intimate interior without compromising on the beautiful scenery outside.

1. Green and energy-saving, improve the efficiency of air conditioning and reduce energy consumption;

2. Safety and prevent accidental injuries caused by accidental glass breakage or self-explosion;

3. Block a large amount of ultraviolet rays and prolong the service life of the home;

4. Decoration, infinite creativity to the limited space;

5. Privacy, some membranes have the function of one-way perspective;

6. Block glare and reduce the damage of harmful light to the eyes.

Hello, Shaanxi master reminds you that the situation you have learned is also a status quo in the glass insulation film market, because the quality of the film is different, so the price varies greatly.

At present, the heat insulation film on the market can be roughly divided into three types based on technology.

A dyeing film: it is generally called ordinary film, this kind of heat insulation film is like the cellophane of the lantern, it can be said that there is no heat insulation effect at all, and the line of sight is very poor, so it will slowly fade after a long time, and it will emit a peculiar smell after heating. Even sometimes it will absorb heat instead of insulation, and if the car is driven in the sun for a long time with this film, the car will become a large steamer.

B aluminized film, is the use of a special process on the surface of the plastic film coated with a layer of extremely thin metal aluminum and the formation of a composite flexible packaging material, belongs to the principle of reflection, this is usually the kind of 4S store gift to the user, the heat insulation rate of about 20%-30%, the use of one or two years or even less time its surface will oxidize and deteriorate, affecting the appearance of the vehicle or the overall effect of the house. Generally, auto shops give away for a long time, so when buying a new car, you should pay special attention to whether the gift from the 4S store belongs to this category.

c Magnetron sputtering film: Taking the heat insulation film products of Master Film Industry as an example, vacuum magnetron sputtering technology is a kind of use of the magnetic field on the surface of the cathode to form an electron trap, so that the electrons drift close to the surface of the cathode under the action of E B. Set up a magnetic field orthogonal to the electric field of the target surface, the fast electrons generated during sputtering make an approximate cycloidal motion in the orthogonal electromagnetic field, which increases the electron stroke and improves the ionization rate of the gas, and at the same time, the high-energy particles lose energy after collision with the gas, and the substrate temperature is low, and the coating can be completed on the non-temperature-resistant material.

This technology is the most cutting-edge technology in the current glass film technology, and it is a top technology that combines the aerospace industry, the weapons industry, and the nuclear industry into civilian use. It has a good effect on heat insulation, light blocking and anti-safety protection.

For different types of membranes, the price will vary greatly. For example, the price of general dyeing film may be quoted for dozens of dollars, and the price of a good film will be about hundreds, but I have not seen thousands of films per square meter, so you should consider this. However, when selecting the film, we should also pay careful attention to the quality of the film, and some people will use garbage film to pretend to be a good film, so we must pay attention.

Our Shaanxi master has a special instrument to detect the membrane, if you are willing, you can contact us.

American Dragon Film! Cost-effective, 10-year warranty!

The material is different **When people are not the same!

Prices vary from place to place.

There are probably all kinds of tubes, and the materials with different workmanship are also different