How to pump the pressure barrel of the water purifier A brief introduction to the pressure barrel of

The pressure barrel of the water purifier is mainly used in the closed water circulation system, which plays a role in balancing the water volume and pressure, avoiding the frequent opening of the safety valve and the frequent replenishment of the automatic water supply valve. Pressure barrels now have etc. In terms of material, it can be divided into plastic pressure barrel and carbon steel pressure barrel.

Pep talk. Water is drained or inlet by the pressure of the airbag in the pressure barrel. When the water is inlet and the barrel is empty or dissatisfied, the pure water purified by the water purifier will flow into the pressure barrel, and when the water pressure in the barrel and the pressure of the air bag reach a balance, the water purifier will stop working.

Drainage, open the faucet, the air bag is squeezed by the pure water will produce the first force, so as to discharge the pure water in the barrel, and the discharged pure water flows to the last stage of the activated carbon filter element because of the check valve, and then discharged through the faucet. After the pressure barrel is emptied of pure water, the water purifier works again, and then the cycle is repeated.

Extended Materials. Advantages and disadvantages of pressure barrels.

1. Advantages. 1) The purified water generated by the water purifier can be stored and used directly from the pressure barrel as needed, which is convenient and fast, and can also solve the problem of drinking water when the family stops drinking water.

2) There is no need to start the water purifier frequently, which helps to extend the service life of the product.

3) The ** with pressure bucket water purifier is lower than the ** without pressure bucket water purifier, which is more favorable.

Shortcoming. 1) The pressure barrel that has been used for two years or more is easy to age, and the ability to inhibit bacteria is reduced. In the storage of bottled water, bacteria can easily occur.

2) The pressure barrel of the water purifier occupies a large space. Generally speaking, the more people who use the water purifier, the higher the liquid level of the pressure bucket (pressure buckets have, etc.).

The black plastic plug at the bottom of the water purifier will be unscrewed, revealing an inflatable port similar to a car tire valve, which can be pressurized with an air pump, etc.

When inflating the water purifier tank, there must be a pressure gauge to control the pressurization pressure. Usually, pumping air to 3 to 5kg is sufficient. However, the safest way to pump up is to find a professional service person to pump up.

The pressure tank of the water purifier is mainly used in the closed water circulation system, which plays the role of balancing the water volume and pressure, avoiding the frequent opening of the safety valve and the frequent replenishment of the automatic water supply valve.

1. We first need to check the pressure barrel, take a look at the pressure barrel or shake the water in the barrel, if the faucet can't get water, it means that we have to pressurize the pressure barrel.

2. Find the position of the pressurization first, because the position of different types of buckets is different, usually the compressor valve is next to the switch.

3. Remove its protective cap to see the compressor valve, and use a tool to rotate the nut on the pressure valve counterclockwise to see the valve inside.

4. To pressurize the pressure barrel, to turn off the switch of the pressure barrel and the power supply of the water purifier, you can use the bicycle's pump to pressurize the pressure barrel.

5. After the pressurization is completed, you can turn on the faucet of pure water to see, if there is a lot of water left in the bucket, we will continue to pressurize until the water in the bucket can flow out.

Precautions

1. When pumping air pressure, don't think that it can be done all at once, we need to try several times, because if the pressure is too much, the pressure barrel will be damaged.

2. If the usual model of the water purifier is different, the position of the water purifier and the materials it needs are also different, so it should be selected according to the actual situation.

3. Usually the pressure barrel of the water purifier has been adjusted when it leaves the factory, if it is not obvious that the pressure is not enough, it is not recommended to operate it at home.

Generally speaking, the pressure barrel of the water purifier should be hit to a slippery 2 kg centith slag to make the width of 2) or kg cm 2). Before the pressure of the pressure barrel of the water purifier reaches the specified value, if it is bright, check whether the liquid level in the barrel and the barrel body are normal, and determine whether the pressure pipe is correctly connected. Then according to the operating instructions, open the pressure regulating valve, turn on the water level switch, press a certain pressure to pump the water into the barrel, and then slowly adjust the pressure until the specified pressure is reached.

When the pressure is adjusted to the specified value, the regulating valve should be closed immediately to avoid the pressure in the pressure barrel being too high and affecting the normal operation of the water purifier.

1.Increase the flow rate of the water purifier.

First of all, it is emphasized that no matter how large the pressure bucket is equipped with the water purifier, it has no impact on the final water production efficiency of the water purifier, but because of the existence of the pressure barrel, the water stored in the bucket can effectively improve the water intake efficiency in the early stage of water intake.

When the water purifier is increased to the pressure barrel, the water can flow out quickly due to the pressure barrel when taking water, and the same water purifier system can greatly improve the water intake speed in the training room in the front stage of water intake, and because the water intake speed is greater than the water purifier water production speed, it increases with the increase of water intake.

The water storage in the pressure barrel will continue to decrease, the pressure in the barrel will decrease, and the flow rate of the water will gradually decrease, and the increase time of the water dispensing speed will also be significantly different when adding pressure barrels of different capacities. So now there is a tendency to increase the capacity of the pressure drum.

2.Reduce the frequency of system operation and reduce system failures.

Equipped with a 4g pressure barrel, (take the high-pressure switch as a control switch) to start taking water, each time taking 200ml of water, record the working status of the high-pressure switch, 3Pressure buckets can inhibit bacterial growth.

Due to the existence of the water storage pressure tank, the use of atmospheric water storage tank in the water purifier is avoided, and the opportunity of direct contact between the prepared pure water and the air is also reduced, thereby reducing the pollution of the purified water prepared by bacteria and other impurities in the air. The presence of pressure in the water storage pressure tank also inhibits the growth of bacteria.

4.Guarantee water supply in a short period of time.

Due to the existence of the water storage pressure barrel, when there is a short-term water outage or power outage, or when the water purifier fails, the water in the water storage pressure barrel can provide a quantitative water supply to meet the temporary needs of customers. Some humanized water storage pressure barrels also have portable functions for customers to take away fresh purified water to replace bottled pure water.