Redmi headphones how to make two headphones in series

1. First, put the earbuds back into the charging compartment, close the lid, and the earbuds will automatically power off.

2. Then pull down the notification bar on your phone and click the settings icon, as shown below.

3. Click [Device Connection] - [Bluetooth].

4. Click the icon behind the Redmi wireless earbuds, as shown below.

5. Click [Unpair].

6. Then re-open the earphone compartment, take out both earphones at the same time, and the earphones will automatically turn on.

7. Finally, find the device name of the earphone on your phone and click to connect.

Here's how to connect the Airdots headphones:

Dual earphone mode.

After the reset, turn on the two earbuds at the same time after being close to each other (the boot interval should be less than 20 seconds), the earbuds will automatically complete the pairing and series, at this time, you can use your mobile phone to search for "Mi Airdots Basic R" or "Redmi Airdots R" or "Redmi Airdots S" and pair.

Redmi Airdots 2 True Wireless Bluetooth Earbuds do not need to be reset, turn on the left and right earbuds at the same time, and the left and right earbuds will be automatically connected in series after powering on. Use your phone to search for "Redmi Airdots 2" to complete the connection.

Single earphone mode.

Redmi AirDots S Airdots 2 True Wireless Bluetooth Earbuds are in single earphone mode after connecting to dual earphone mode, and after turning off either earphone.

Reset, press for about 15-20 seconds to turn on, remember that the red and white lights should flash twice, and the interval between the two times is not light up for one or two seconds. After resetting, clear the Bluetooth connection record of the mobile phone, and turn on the two earphones in series. Then put it in the charging case and turn it off, and take out the right ear to connect the phone again.

After putting it back in the charging case, take out R first (red and white lights flashing alternately), and then take out L (also red and white lights flashing alternately), and the Bluetooth list of the mobile phone only has mi airdots basic r, so that it is connected in series. The Bluetooth of the mobile phone can be connected by Mi Airdots Basic R.

Under normal circumstances, it will not be connected in series at the same time according to the instructions. You need to follow the above method to clear the connection information! The right ear can be connected immediately after taking it out of the box, and the left ear needs to be connected in series with the left ear and then connected to the single ear after taking it out, so the left ear is not connected immediately when it is taken out of the box, and it takes about 10 seconds to wait.

Other questions: Binaural mode: put them all in the box, take the right ear first, and then take the left ear to automatically connect.

Left ear mode: To connect the mobile phone separately once to the left ear, put it back in the box, and the left ear alone will be normal in the future.

Right ear mode: Put the left ear back in the box.

Binaural mode is changed to only the left ear listening: both are put back into the box and then take out the left ear separately.

Reset binaural tandem: unpair on devices such as mobile phones; After the earphones are turned off, and then press and hold the boot for at least 15 seconds to hear the reset tone, the earphones will automatically turn off and put back into the box; Take the right ear into the ear first, then take the left ear, and it will be automatically connected in series.

2. It may be that the Bluetooth data of the device is abnormal, and try to delete the previous connection record of the device;

3. Restart the phone, change the phone or change the use environment.

4. Take the earbuds out of the charging case, in the power-off state, press and hold the multi-function buttons of the two earbuds respectively for about 15 seconds, and release them after the second red and white lights flash three times alternately, and the earbuds reset is completed, and the reset process includes clearing the records of the two earphones pairing in series and pairing with the device. "

I'm also in the same situation as you Xiaomi Bluetooth Headset Youth Edition,Suddenly the left and right ears can't be docked,The left ear prompt light keeps flashing,Poke it into the small hole below with a pin,Just let it restart。

Turn off the two earphones and then put them next to your ears and press them at the same time After hearing a different sound, put them back in the charging case Turn off the Bluetooth of the mobile phone Take it out at the same time after a few minutes Wait until you see the two earphones flash quickly at the same time Until the left ear is not flashing The right ear is still flashing, turn on the Bluetooth of the mobile phone and it can be successfully restored --**Paste it, brother.

Direct off of the left ear Connect the Bluetooth headset of the right ear Turn off the previous Bluetooth connection record to re-pair the Bluetooth headset of the right ear.

The method of connecting Xiaomi Bluetooth headphones in series is as follows:

1. First take out both earbuds from the charging case at the same time, and wait for 2 to 3 seconds before the earbuds will automatically power on in series.

3. If the connection fails, put the earbuds back into the charging case and repeat the above connection operation. After connecting for the first time, the earbuds can be automatically reconnected to the last paired device when powered on (Bluetooth needs to be turned on).

4. If the automatic connection fails, please use the manual operation mode. Manual connection: When the earphones are turned off, manually turn on the two earphones, the white light flashes quickly and waits for the left and right earphones to be connected in series, and the white light of the right earphones flashes slowly after the series is successfully connected, and then turn on the Bluetooth of the device to connect.

Method: Take the earbuds out of the charging case, in the power-off state, press and hold the multi-function buttons of the two earbuds for about 15 seconds, and release them after the second red and white lights flash three times alternately, at this time, the earbuds are reset completely, reconnect the earbuds with the mobile phone, and the earbuds will automatically complete the pairing and series.

Redmi is a technology brand for young people under the Xiaomi Group. It aims to create high-quality, flagship experience, and smart hardware products for young people around the world. Adhere to the brand concept of "desperate love" and stand with young people around the world.

The predecessor of Redmi is the new product line "Redmi" launched by Xiaomi on July 31, 2013. At 10 a.m. on January 3, 2019, Xiaomi officially announced that it would upgrade the Redmi series to an independent sub-brand of Xiaomi's mobile phone businessOn January 10, Xiaomi held an independent press conference for the Redmi brand.

On March 18, 2019, Lu Weibing, vice president of Xiaomi Group and general manager of the Redmi Redmi brand, issued the "Redmi Brand Independence Declaration".

On May 20, 2021, Mr. Lu Weibing, partner of Xiaomi Group, president of China and International Department, and general manager of the Redmi brand, announced on Weibo that the global sales of the Redmi Note series exceeded 200 million units, and the global shipments of the Redmi Note 9 series exceeded 45.2 million units.

The above information refers to the encyclopedia - redmi

<> Bluetooth headset is to apply Bluetooth technology to hands-free headphones, so that users can avoid the stumbling of annoying wires and talk easily in various ways. Redmi.

Take out the Bluetooth headset to pair and connect.

Turn on your phone's Bluetooth switch button.

Look for the "redmiairdots" wireless bluetooth headset logo.

Select the Bluetooth headset and tap Confirm.

If you need to reset the headphones, you need to press and hold the top of the Bluetooth headphones with both hands.

After the reset, pair your phone and earbuds.

Summary: 1. Take out the Bluetooth headset for pairing.

2. Turn on the Bluetooth switch of the mobile phone.

3. Select "RedmiAirdots" wireless Bluetooth headset.

4. If you need to reset the earphones, you need to press and hold the top with both hands.