The power light of the printer keeps flashing and is not working, what is the reason?

1.It may be that there is a lack of paper at the printer drum or that the paper to be printed is not in the right position.

2.See if there's any ink in the cartridge and try adding some more ink.

3.It may also be caused by poor contact at the cartridge, and you can find a maintenance person for troubleshooting.

4.If the green light is flashing all the time, you can press the green light button.

5.You can also turn off the power of the printer and wait for about five minutes to turn it on.

6.The machine does not detect the toner cartridge, please check whether the toner cartridge is installed.

7.The size of the carton is not standard paper.

Feed paper from manual paper holders instead.

Extended Information: The power indicator on the printer keeps flashing

1.Check the cartridge. Open the printer top cover, and if the cartridge trolley is able to move from the side to the center, remove one of the cartridges, and then close the top cover to inspect.

If the printer's power indicator is solid back, the cartridge you removed is faulty and you can replace it. If the power indicator of the printer is still flashing, you can install the removed ink cartridge into the printer, take out the other ink cartridge, close the top cover for inspection, if the power indicator of the printer is still flashing, it means that both ink cartridges of the printer have problems. Replace them all;

2.Check if the cartridge trolley is stuck. If the cartridge trolley is stuck on the left side of the printer:

Unplug the printer power cord and gently move the cartridge trolley to the middle of the pen holder with your hand. Push the cartridge cartridge to the far left end of the printer and plug in the power cord. Turn on the power to the printer.

Troubleshoot if the printer's power indicator is no longer flashing; If the cartridge trolley is still stuck, it is recommended to send it to the repair center for inspection;

3.Check if the printer is jammed. If the paper is jammed, you can open the back cover of the printer, see the paper and slowly take it out;

4.Check if the printer is out of paper. Press the power button of the printer to confirm if the printer is flashing because it is out of paper, and if so, add paper.

The power flicker is generally a home machine, and there are not so many indicators.

There may be paper jams, paper shortages, ink shortages, etc.

The printer cartridge light keeps flashing and does not printSolution:

1. To detect whether the printer is jammed, the paper jam should open the back cover of the printer, and the ruler will take out the jammed paper, of course, sometimes when you jam the paper, the paper will be broken in the printer, so be sure to check it clearly.

Second, check the ink cartridge, color printers have two ink cartridges, if the printer cartridge is not put well, or there is a problem with the ink cartridge, there will also be such a prompt, of course, the printer toner cartridge.

It will also be the case, the toner cartridge is not put in place, and it is too sleepy to raise it will prompt the printer indicator light to be flashing all the time.

3. Check whether the printer is short of paper, sometimes we see that there is paper, but the printer can be used to absorb paper, and this may also happen.

Fourth, restart the printer, the above points are done, no, you can only have a universal start, restart the printer, it may be possible to connect to print.

Precautions for the use of the equipment:

1. The printer cartridge needs to be replaced in time after it is used up. Do not enable the device until the cartridge is placed in the device.

2. The printer is stuck and needs to be turned off for processing.

3. If the printer is not used for a long time, it needs to be started regularly to avoid the aging of equipment parts.

4. The printer cannot print ink, which may block the ink cartridge, so it needs to be cleaned before use.

See if there is ink in the cartridge, add some ink to try, it may also be caused by poor contact at the cartridge, you can find a maintenance personnel for troubleshooting.

If the green light is flashing all the time, you can press the button of the green light, or you can cut off the power of the printer, and wait for about five minutes to try to turn on the computer, or the machine does not detect the toner cartridge, please check whether the toner cartridge is installed.

In the unlikely event that the printer generates heat, smoke, odor, or abnormal sound, please cut off the power supply immediately and contact the information staff. It is forbidden to put other items on the printer. When the printer is not used for a long time, unplug the power plug from the power outlet.