What to do if the computer printer suddenly can t be used The printer is good, the interface has not

It may be due to a mistake that the shared printer in the computer has been turned off

Change the printer line to see if the line is broken.

The reason for this problem is: There is a problem with the system configuration of the printer, and it needs to be reconfigured as follows:

1. In the first step, open the desktop of the computer, then click the windows icon in the lower left corner, and then select the "Devices and Printers" option, see the picture below, go to the steps below.

2. In the second step, after performing the above operations, select the faulty printer in the printer category, right-click the printer icon, and then select the "Troubleshoot" button, see the figure below, go to the steps below.

3. In the third step, after performing the above operations, the application will automatically detect the driver or configuration of the printer, see the figure below, go to the steps below.

4. Fourth, after performing the above operations, the problems will be listed and click "Apply", see the figure below, go to the steps below.

5. In the fifth step, after performing the above operations, after the maintenance is completed, the "Troubleshooting Completed" prompt will pop up, and "Repaired" will be displayed, as shown in the figure below. In this way, the problem is solved.

Summary. Hello: 1. The background service is not running.

Check to see if the service is turned off: My computer right-click on the management -- services and applications under the service put it -- you can see a list of services, this time you can find: print spooler Chinese instructions 'load the file into memory for late printing.

2. Check whether this service is activated. If it doesn't start, double-click to open - select Automatic, and then start the service. Then try to see if the printer works.

What happens when the printer is connected to the computer but can't print.

Hello: 1. The background service is not running. Please check if the service is closed:

My computer right-click management -- services and applications under Chi Hui service put it -- you can see the argument to a series of services, this time to find the early arrival: print spooler Chinese instructions 'load files into memory for late printing.

2. Check whether this service is activated. If it doesn't start, double-click to open - select Automatic, and then start the service. Then try to see if the printer can make trouble, then Qi changed the working liquid shed.

You can check these two aspects.

Okay, I see.

Hmm, take a look.

Can't find it. In the electricity of **.

Computer. Hello: Didn't you find it?

Turn off the printer and reconnect it. If that doesn't work, replace the cable you used to connect to.

Summary. I've been waiting for a long time and don't know whether your printer is connected to your computer through a network or a data cable.

If you are connected to a computer on the Internet, you will need to do the following:

1. Whether to restart after installing the printer driver, the general driver can only take effect after restarting, and then please make sure that the printer has been turned on and set as the default printer.

2. Check whether the printer IP is on the same LAN as the computer. If it is a network cable, you need to check whether the network cable is unblocked, and WiFi needs to see if the printer is successfully connected.

3. The above two are no problem, please ping the printer IP to see if it can be connected.

If you are connecting to a computer with a data cable, you need the following checks:

1. Whether to restart after installing the printer driver, the general driver can only take effect after restarting, and then please make sure that the printer has been turned on and set as the default printer.

2. Check whether the data cable is unblocked, if not, please replace the data cable.

In either case, if the check is normal, you still can't print, please try to install the driver printing on a different computer to rule out the possibility of the computer itself malfunctioning. If you still can't print after replacing the computer, it means that the printer is faulty, and you should contact after-sales service for repair.

The printer driver is installed, and the printer is fine, but it just can't print, why is that?

I've been waiting for a long time and don't know whether your printer is connected to your computer through a network or a data cable. If you are connected to a computer on the Internet, you need to check the following: 1. Whether to restart after installing the printer driver, the general driver can only take effect after restarting, and then make sure that the printer has been turned on and set as the default printer.

2. Check whether the printer IP is on the same LAN as the computer. If it is a network cable, you need to check whether the network cable is unblocked, and WiFi needs to see if the printer is successfully connected. 3. The above two are no problem, please ping the printer IP to see if it can be connected.

If the data cable is connected to the computer, you need to check the following: 1. Whether to restart after installing the printer driver, the general driver can only take effect after restarting, and then please ensure that the printer has been turned on and set as the default printer. 2. Check whether the data cable is unblocked, if not, please replace the data cable.

In either case, if the check is normal, you still can't print, please try to install the driver printing on a different computer to rule out the possibility of the computer itself malfunctioning. If you still can't print after replacing the computer, it means that the printer is faulty, and you should contact after-sales service for repair.

Hello, because seeing that you did not rate me last time, I am very concerned about your experience. If you are satisfied with my service, I hope you can give a thumbs up! If there is a problem, I am always waiting for you. I wish you a happy life and a happy life!

<>1. When the printer driver Anyuan ant is closed, it cannot be printed, which can be solved by the following methods. Right-click the "Computer" icon and select "Manage" from the pop-up right-click menu.

2. At this time, the "Computer Management" interface will be opened, click the "Device Manager" item, and "Print Queue" on the right side, where you can view the currently installed physical printer and virtual printer equipment.

3. If you find that the printer you want to use displays a "yellow exclamation mark" or other wrong logo, it means that the driver is not installed correctly. You can install this by searching for a driver that matches the printer.

4. It may also be caused by the corresponding printer driver being disabled, right-click on the disabled printer setting, and select the "Enable" item to enable this setting.

5. If the above methods cannot repair the printer failure, the most likely hail cracking energy is caused by the service not starting. In the Services list, find the Print Spooler service item and make sure it is enabled properly.

6. If the printer cannot be used normally due to other unknown faults or incompatible system programs, you can install a virtual printer to achieve alternative printing operations. You can search for the relevant virtual printer program.

7. After the installation of the virtual printer driver is completed, you only need to configure it simply, and you can use the virtual printer to achieve richer functions. One of them is to convert the print job to a PDF document so that it can be printed on another computer with a printer.