Win10 system, how to set up a dual screen display for the computer

Tool: win10 system.

Step method: 1. First, confirm that the notebook contains an external display port, such as VGA, HDMI, etc. This makes it easy to connect an external monitor to achieve dual-screen display.

2. Connect an external monitor, so that the hardware has the conditions for dual-screen display.

3. Next is the setting of the software. You can use shortcuts to configure, for example, Dell's shortcut is fn+f1, but because the shortcut is different for different laptops. Therefore, the configuration method of the software is introduced. Open the Settings option in the Control Panel to view the display settings.

4. The way to configure multiple monitors is to expand these displays. After selecting the second monitor, you can set the display parameters of the monitor.

5. Maintain the above configuration information, and the dual display screen will display the win10 interface. Not only has the display content been expanded, but it is also more convenient to operate.

Note: Ensure that the notebook has dual display function.

1. Please prepare a VGA or HDMI cable and an external display screen in advance.

2. Use the cable to connect the external display to the laptop.

3. Use the key combination "win" + "p" to set the display mode.

4. There are four display modes, which can be switched freely according to actual needs.

Right-click in an empty space on the desktop, select Display Settings, and in the "Multi-Monitors" section below, you can choose to "Duplicate these displays" or "Extend these displays", the former is all screens showing the same content, and the latter is all screens stitched together to display content. Click below to apply for effect.

The specific steps to set up dual screen display in Windows 10 operating system are as follows:

The first thing you have to do is have another monitor.

1. Bring up the setting interface [shortcut] window key + P <>

2. Another way to enter the settings interface.

Projection via notification bar = "".

The function of this interface is still explained.

Computer screen only (PC only, the second screen is not displayed.) Copy (The second screen shows the same content as your computer.) ）

Extended (The second screen becomes the extended area of the computer.) That is, the second screen) only the second screen (the computer does not display content, only the second screen shows the content of the computer. This is the most common setting for using a projector. ）

3. Set the display resolution.

4. The description shows the description of each item.

5. In the display, "Advanced Display Settings".

The second screen resolution is not necessarily the best resolution when you connect for the first time. Setup required. Note that older monitors may not have a high maximum display resolution.

After passing the above settings, you can set up a dual display in the Windows 10 operating system.

The external monitor of the notebook needs to prepare an HDMI cable, connect the two ends of the notebook and the monitor, how to press the keyboard shortcut [win] + [p] key to set.

1. Please prepare a VGA or HDMI cable and an external display screen in advance.

2. Use the connection as a wheel cable to connect the display screen that needs to be connected to the laptop.

3. Make Shenling use the key combination "win" + "p" to set the display mode.

4. There are four display modes, which can be switched freely according to actual needs.

1. Prepare the notebook, monitor and VGA cable that need to be connected;

2. Connect the VGA port of the notebook and the VGA port of the monitor through the VGA cable;

3. On the notebook keyboard, press and hold Win+P, you can see the 4 ways of external monitor: PC screen only, duplicate, extend, second screen only, that is: computer screen only, copy, expand, second screen only;

4. On the laptop keyboard, press and hold Win+P, select PC screen only, that is: computer screen only; You can see that only the laptop screen has a display;

5. On the notebook keyboard, press and hold win+p, select duplicate, that is: copy; You can see that the pure empty laptop screen is displayed on the screen and the monitor, and the content displayed is exactly the same;

6. On the notebook keyboard, press and hold win+p, select extend, that is: extend; It can be seen that the laptop computer computer screen and the monitor are displayed, but the content displayed is also different;

7. On the notebook keyboard, press and hold Win+P, select Second Screen Only, that is: only the second screen; You can see that there is no content display on the laptop screen, only content is displayed on the monitor. As for the display method you need to choose, it's up to you to decide.