Why does the watch suddenly go faster? Why is the watch going faster and faster?

Watch maintenance and repair can refer to the service center of 702] Joy City Office Building, Xidan District, Xicheng District, Beijing to provide Swiss watch strap customization, cleaning and maintenance, identification, refurbishment, fault repair, watch appearance and replacement of damaged parts, and strap replacement services. Our technicians have undergone strict professional skills training and provide two years of after-sales guarantee services. The service center is guided by the watch manufacturer on the spot**, **transparent, no hidden consumption, no additional charges.

1. The speed of the mechanical watch is mainly determined by the pendulum frequency, usually the larger the pendulum amplitude, the smaller the pendulum frequency, and the smaller the pendulum amplitude, the greater the pendulum frequency. Generally, watches rely on the retraction and release of the hairspring to control the swing, which is the basic principle of adjusting the speed and slowness. If the hairspring is longer, the swing will increase, the frequency will be smaller, and the watch will be slower; Conversely, the more the pendulum frequency increases, the faster the watch will be.

2. The structural problem itself, due to the gravitational force of the earth, the offset of the horizontal position and the vertical position will produce a displacement, the mainspring is tightened from the top to the relaxation, the torque is unbalanced, and the external temperature, magnetic field, vibration, etc., even if the mechanical watch increases some frequency, it is impossible to achieve the accuracy of the quartz electronic watch.

3. The effect of the magnetic field, after the hairspring is magnetized, the circle between the rings is only shown when wearing, there is a sticky or short-term lap, especially in the façade, the hairspring will hang down due to its own gravity, and the shaking of the arm will intensify its radial movement, and the magnetic energy utility is shown because of this.

4. The balance of the balance wheel and the balance spring, especially the balance wheel, the balance wheel is very poor, which will cause the balance wheel to highlight the precision change of the surface under a certain swing.

Quartz watches or electronic watches basically do not have this problem, unless it is out of power, so it is not considered. You're talking about mechanical watches, whether they're going faster or slower.

can all be classified as inaccurate. First of all, it is inevitable that there are errors in mechanical watches, even if it is a tourbillon watch, it can not be as accurate as a quartz watch (please refer to the allowable error range), the most basic reason for the inaccurate time is the mainspring problem, the magnetization problem, the magnetization caused by the hairspring sticking will be like the watch will go faster and faster, the problem is not big.

Just go for a test.

Then do a degaussing and you're good to go.

The phenomenon of the watch suddenly running fast for more than ten minutes to several hours is generally due to the following reasons:

1. Place the watch next to an electrical appliance or magnetic object that generates a magnetic field;

2. After the watch enters the water, the balance spring is stained with water;

3. There is a foreign body in the hairspring;

The allowable error is 30 seconds per day for general mechanical watches and +-15 seconds per month for quartz watches. The exact error depends on the movement used in the watch.

If the time is not accurate due to the above reasons, you need to go to the maintenance point designated by SAGA for degaussing or cleaning and maintenance of the hairspring.

I guess you're talking about mechanical watches. The precision of the watch seems to be. It mainly depends on that hairspring.

Resembles the shape of a coiled spring. The first generation of watches in my country seems to be a hairspring made of iron wire, a collision of watches. Magnetization of the watch.

The temperature is too low. , will cause a sudden faster. We are still a little short of Switzerland in terms of the level of mechanical watch manufacturing.

Horizontal, with fewer people with watches, was replaced by mobile phones. But wearing a watch also shows connotation and repair. I wish you a happy life.

Usually there are three reasons why mechanical watches are getting faster and faster: one is shock, the other is magnetic, and the third is that the oil filaments stick together. If the watch does not collide, it is estimated that it is magnetized, and it needs to be demagnetized as soon as possible, and adjusted, it is best to go to a professional watch repair center for testing, so as to accurately find the reason why the watch is fast.

It is impossible for any mechanical watch to be perfect for one second, and the general daily error is considered qualified within 30 seconds.

Related Notes:

1.It is especially important to remind everyone that any watch should not be worn in warm water or in the bathroom, even if your watch is a waterproof watch, because the sealing roll rubber of the watch is easy to age when heated, and the surrounding water vapor molecules are relatively small, which can easily penetrate into the case and cause damage to the internal machinery.

2.If there is any abnormality in the watch, it should be sent to a specialized watch shop for inspection immediately.

3.The automatic watch must be worn for more than 10 hours a day when the amount of activity is sufficient, i.e. it must be worn for more than 10 hours a day in order to function properly.

4.Different watches should be worn on different occasions, such as sports watches with excellent waterproof and shock resistance.

5.If the watch has a Water Resistant or 3ATM label on the case cover, it is generally only suitable for splashing or light rain without pressure.

The speed of the watch may be caused by the movement being too tense, causing the balance to oscillate too fast, or the balance wheel inside the movement oscillating too much. Here are some possible workarounds:

Adjust the time: If the watch doesn't go fast for a long time, you can try to adjust the time to solve the problem. Slow down the watch time a bit, and wait until the watch time is synchronized with the standard time before turning the time back.

Adjust the movement: If the watch is going fast for a long time, you need to adjust the movement. The watch can be sent to a professional watch repair shop or watch brand specialty store for adjustment by a professional technician.

Maintain the movement: If the watch is not serviced for a long time, it can also cause the watch to go faster. It is recommended to send the watch to a professional repair shop for maintenance every once in a while (generally 2-3 years), cleaning and lubricating the movement to ensure the normal operation of the watch.

It should be noted that the watch may also be due to a strong impact or magnetic field interference, resulting in a malfunction of the movement, in which case it needs to be sent to a watch repair shop for inspection and repair in time.

1.How to adjust the watch back when it goes fast For quartz watches, the method of adjusting when it goes fast is also very simple. All we need to do is pull out the watch handle and turn clockwise to the correct time.

2.How to repair the watch when it goes fast For more expensive mechanical watches, the watch is fast, and it is particularly important. Because expensive watches are much more troublesome to repair, and ** is relatively expensive.

Look at whether your watch is a mechanical watch or a quartz watch, if it is a mechanical watch is much faster, you need to go to the place where the watch is repaired for correction, if it is a quartz watch can be directly adjusted back.

If you are magnetized by your phone, TV, etc., go to the place where your watch is repaired! I've had problems with my automatic watch before, so it's good to fix it.

If the watch is newly bought, you can go to the after-sales service to inspect it and then repair it. If you have bought it for a few years, you can only pay for repairs at your own expense.

If it's a sophisticated watch to adjust it, if it's just an ordinary watch, then don't worry about it, there is something wrong with the watch itself.

The watch time is going fast and is subject to severe shocks or vibrations.

When the watch is subjected to severe shocks or vibrations, the parts in the movement will be misaligned, and the operating state will change, resulting in faster (or slower or stopped). In this case, the movement can only be restored to normal if it is repaired by a professional repair shop. It is normal for a watch to run at normal temperatures, but extreme temperatures can affect the lubricating oil in the movement, causing the watch to go faster.

Depending on each watch, there may be a state of going fast first, then slowing down, and finally stopping, if the watch is not worn for a short period of time but becomes faster when walking, it may be caused by insufficient power. In this case, it is only necessary to keep the power in a relatively high range to solve the problem of timekeeping, automatic watches can use the watch shaker to maintain power when not wearing, and manual mechanical watches need to be manually wound at regular intervals according to the watch's dynamic reserve.

Watch maintenance tips:

1. There should be a fixed time for winding, and it is best to wind it at one time. Even if you can't turn it, you can never force it to go on again.

2. When proofreading the time, you should first release the lock state of the handle, and then pull out the handle to adjust the position of the adjustment time. The adjustment time can be adjusted clockwise and counterclockwise in both directions. However, the calendar can only adjust the calendar clockwise, depending on the adjustment guide and instructions for use of the watch.

3. Don't let the watch cool and hot. Sudden changes in temperature can increase the watch's timing error. The internal mainspring of a mechanical watch is prone to breaking due to rapid changes in temperature; At the same time, it will also cause the waterproof performance to decrease and affect the time.

4. Violent vibration should be avoided. Otherwise, the resulting additional force or the resulting force couple pitch can damage or deform the delicate parts within the watch, thus affecting the quality of the timekeeping.

Hello, glad for your question. For automatic mechanical watches, if the swing inside is larger, it will cause the time to go faster, at this time, you can manually rotate the hairspring to control the swing to ensure normal and stable operation. If it is caused by magnetization, the watch should be sent to a regular store for inspection and processing, so as not to affect the service life of the watch.

Hope mine helps you.