Diagnosis and maintenance of braking system faults

There are many reasons why you can be specific.

A braking system failure is a problem with some parts of the vehicle's braking system, which will cause the braking system to not function properly.

The main function of the car's braking system is to slow down or even stop the moving car, keep the speed of the car driving downhill stable, and keep the stopped car still. It is usually recommended that the owner should not continue to drive for a long time, but should go to a nearby repair shop for inspection and maintenance, and then drive on the road after the vehicle is troubleshooting, so as not to bring hidden dangers to personal safety.

The cause of a failure of a vehicle's braking system is excessive wear and tear on the brake pads. Some brake pads are equipped with induction wires, and when the brake pads are worn to the limit, the circuit will be turned on, and the fault light on the instrument panel will also be illuminated. Insufficient brake fluid.

The lack of brake fluid will be accompanied by a significant lack of braking force, and even a loss of braking force will occur in serious cases.

Braking system

It is a series of special devices that make it possible to force the driving speed of a car to be reduced. The braking system is mainly composed of four parts: energy supply device, control device, transmission device and brake. The main function of the braking system is to slow down or even stop the moving car, stabilize the speed of the car driving downhill, and keep the stopped car still.

The braking system can be divided into human braking system, power braking system and servo braking system. The braking system that uses the driver's body as the only braking energy source is called the human braking system; A system that relies entirely on the potential energy of the engine, which is converted from the power of the engine, in the form of air pressure or hydraulics, is called a power brake system.

Summary. Hello dear, the causes and treatment methods related to the failure of the braking system of the vehicle are as follows. First, the vehicle's brake fluid level is too low or the brake pads are too thin, resulting in this phenomenon, first check the state of the brake fluid and brake pads.

The second situation is that there is a problem with the sensor in the vehicle's braking system, and it is necessary to use the computer to read the fault ** check the ABS sensor, and if there is a problem, it needs to be replaced. The third situation is that the relevant ABS pump or line fault needs to be repaired, and the ABS pump or troubleshooting line needs to be checked. Hello, I wish you a happy family, if necessary, you can continue to consult, I will always wait for your reply I wish you good luck, everything goes well, and a happy life!

Kiss kiss kiss.

Hello dear, the causes and treatment methods related to the failure of the braking system of the vehicle are as follows. First, the vehicle's brake fluid level is too low or the brake pads are too thin, resulting in this phenomenon, first check the state of the brake fluid and brake pads. The second situation is that there is a problem with the sensor in the vehicle's braking system, and it is necessary to use the computer to read the fault** check the ABS sensor, and if there is a problem, it needs to be replaced.

The third situation is that the ABS pump or line fault needs to be repaired or troubled by the ABS pump or the line. Hello, I wish you a happy family, if necessary, you can continue to consult, I will always wait for your reply Good luck, everything goes well, and a happy life! Kiss kiss kiss.

Hello dear, the causes and treatment methods related to the failure of the braking system of the vehicle are as follows. First, the vehicle's brake fluid level is too low or the brake pads are too thin, resulting in this phenomenon, first check the state of the brake fluid and brake pads. The second situation is that there is a problem with the sensor in the vehicle's braking system, and it is necessary to use the computer to read the fault** check the ABS sensor, and if there is a problem, it needs to be replaced.

The third situation is that the ABS pump or line fault needs to be repaired or troubled by the ABS pump or the line. Hello, I wish you a happy family, if necessary, you can continue to consult, I will always wait for your reply Good luck, everything goes well, and a happy life! Kiss kiss kiss.

Help me see this faulty light! It's that broken.

Hello friends, there are several reasons that I just mentioned. You need to use the computer to read the fault code in time.