What s going on with the WAN light not coming on after the router is factory reset

Router problems, replace with a new or standby router;

Modem problem, modem damage or failure causes the signal to be unable to transmit to the router normally, resulting in the router WAN port not receiving the signal normally, call customer service to repair or replace it with a new spare modem;

Extranet faults, resulting in the inability to use the network normally, resulting in the router being unable to receive signals normally.

The desktop is normal, which means that the network is fine, but the laptop can't be connected, is there any mac binding? Or maybe it's not good to touch! It is estimated that the operator can not do the binding, or suspect that the head of this network cable and your notebook, the contact is not very good!

Let's try to redo the network cable on the street.

If the laptop experiment is good, but the router still doesn't work, then you can try to change the network cable to a crossover cable yourself. But if you want to share the Internet, you should connect to the WAN port of the router.

China Telecom provides the best quality network communication services, old friends for new phones, Internet age cash, 100 Gigabit broadband free experience, ultra-clear TV ITV, 517 telecom activities can be directly queried through the telecom business hall or physical business hall.

Hello dear I am very happy to answer this question for you, how to solve the router only the WAN light is on: Okay, dear, customer service Xiaoxi is happy to answer the following for you: Router red light solution:

1.Check whether the optical fiber interface plugged into the modem is loose, and if it is loose, plug it back in. 2.

Restart the modem, turn off the power supply to the modem, wait for a few minutes, and then turn on the power. 3.If there is a problem with the optical interface of the optical modem, you need to replace the optical modem.

4.Broadband arrears. At present, broadband is basically a postpaid model, because the arrears are too long, the operator directly turns off the user's broadband, in this case, you need to pay off the arrears to recover.

5. After completing the previous method, if the optical modem still flashes the red light, then it is recommended to call the customer service of the broadband operator**, report the fault, and let the operator send someone to overhaul the broadband, it should be a problem with the optical fiber interface, this is a problem on the company's side, and the operator needs to restore it, thank you for your patience, what other problems can I help you <>

1. If you can access the Internet, it means that the indicator light of the WAN port is broken, and you can ignore it;

2. If the other indicators are still on, please check the network cable and crystal head between your "cat" and the router to rule out poor contact.

3. If you can't access the Internet, you can directly connect the computer through the "cat" with broadband, if you can get on, it is a broken router, you can try to change the mail device.

4. If you can't access the Internet with broadband, it may be that the "cat" is broken or the network is faulty, and you can find a network maintenance worker to help you solve it.

1. The signal indicator is not on.

1. If the signal indicator light is not on, it should mean that there is no signal for transmission, but it is certain that the lines are normal between them, use the replacement method to change the network cable connected to the computer to another computer or use the tester to check whether there is signal transmission. Signaling is a problem with the local network card, and it has been proven in actual work experience that the network card causes no information transmission is a relatively common router failure.

2. First of all, check whether the network card is installed normally and whether the IP setting is wrong, you can try to ping the IP address of the machine, if it can be ping, it means that the network card is not much problem. If not, you can try to reinstall the NIC driver.

3. For some network cards that use integrated network cards or network cards of low quality, it is easy to appear unstable, that is, all the settings are correct, but the network is not connected, and the network card can be disabled, and then re-enabled, which will also have an unexpected effect.

2. The connection indicator light is not on.

1. Observe that there are two indicators on the back side of the NIC RJ45, which are the connection status indicator and the signal transmission indicator respectively, in which the connection status indicator is green and always bright under normal conditions, and the signal indicator is red, which should keep flashing normally.

2. If the connection indicator is found, that is, the green light is not on, it means that the connection between the NIC and the hub or the switch has a router fault. Segmentation exclusion can be done using a tester, and if the switch to the NIC is interconnected by multiple modules, then a dichotomy can be used for quick positioning.

3. Under normal circumstances, most of the router failures occur due to the network cable is not connected, the use of inferior crystal heads, etc., and most of the fault points are problems at both ends of the connection, such as the connector at the port of the switch and the network card connected to the computer.

1. Generally, the router will display the power light, broadband signal light and wifi signal light when working normally, and it must be on normally, if it is not lit, it may be that it is not powered on, or the power supply and router are damaged, check whether the socket and power connector are powered on in turn. If only the power light is not on but the router can operate normally, it may be that the power LED lamp bead is faulty;

2. If the broadband indicator is off, it may be that the external network broadband is unable to access the Internet, or the router may be connected to the external network interface faulty, or the router's own broadband settings may be faulty. Log in to the router's management page to check whether there is a network connection fault message, and if there is a fault message, you can try to reset the broadband connection or plug and unplug the broadband connection interface. After troubleshooting the router and network cable interface, you can call the customer service of the broadband operator** for consultation;

3. If the indicator light of the wifi network is not lit, it may be that the wifi wireless signal is turned off, it is recommended to check whether the router has a hardware wireless switch button to click on, or enter the management page of the router to check whether the wifi signal is turned off, and reopen it to solve the problem;

4. Some of the router also has a sys system indicator, this is the working status indicator of the router, flashing represents normal, if the sys system indicator does not light up to cut off all the power, turn the router back on, it still does not light up after restarting, it is recommended to press and hold the [reset] button in the router, wait for the router to reset, and then set the router again.

WAN lights don't come on:

1.Unplug the power cable behind the router and reconnect it back, find a small hole or button marked reset near the router's Internet cable interface, press it for about ten seconds when the router is powered on, and observe that the indicator light turns on and off together and then lets go.

Try unplugging the broadband line from the routing WAN port, connect the broadband line to any one of the 1 2 3 interfaces, if the 1 2 3 light is not on, you can change the WAN port line connected to the router. Shirt Sparrow.

2.If the 1 2 3 interface light is on, try to get a network cable.

One end is connected to the computer and the other end is connected to the WAN port.

If not, it may be a fault of the routing WAN port, and it is recommended to send it for inspection.

If it is bright, it means that there is no problem with the WAN interface, open the browser to enter, click "Advanced Settings" - WAN Rate Control, select 10M half-duplex for broadband below 4M, select 10M full-duplex for 4-10m, select 100M half-duplex for 10m-20m, select 100M full-duplex for 20-100m, click OK. Click on System Tools - Restart Router.

The router WAN light not lighting up can be caused by several reasons:1Network cable connection problems:

Make sure that the network cable is properly connected to the WAN port of the router to point to the output port of the sock and broadband modem, and make sure that it is plugged in tightly. If you can, try replacing it with a new cable. 2.

Router configuration issues: Check whether there is any misoperation that caused the router to be misconfigured. You can try restarting your router or using the default factory settings to restore your router's initial configuration.

If the above methods do not solve the problem, we recommend that you contact the technical support of the router manufacturer or a professional network engineer for more detailed help and guidance.

If the indicator light of the WAN port of the router does not light up, it means that the WAN port of the router has no trace of clear reputation data, and the device cannot access the Internet, and there are several common problems that the WAN light does not light up on the router: 1. The router is faulty and needs to be repaired. 2. The light at the wankou is broken.

3. There is a problem with the network cable and needs to be replaced. 4. The WAN port is not plugged in or plugged in wrongly. At this time, you can first check whether there is a problem with the network cable between the WAN port and the modem, and then restart the modem and the router, if the network cable and restart have no effect, then it may be that the network cable itself has no network or the interface of the WAN port is broken, then you can change to a Huaifu router to try.

You can also directly remove the router and connect the network cable directly to the computer, if the computer can access the Internet, it means that the router is faulty, if the computer can not access the Internet, it means that the network cable itself has no network, then you can call the operator, explain the situation, and let them solve the problem.

If the WAN port indicator of the router is normal, but it still can't access the Internet, then there should be a problem with the configuration of the router, then you can use the computer posture segment to enter the router's settings page, dial-up Internet access to select ADSL, fiber Internet access to select static IP, after the setting is successful, click Save. If your computer is connected to WiFi, you need to set your computer to automatically get an IP address.

Dear, hello, the router WAN light has been on and can't get on the Internet? As follows: The indicator light on the WAN port of the wireless router keeps flashing while it is working properly.

If the indicator light on the WAN flashes continuously, it means that the network data signal is transmitting normally. If the WAN indicator light is on, it means that the direct transmission of the wireless router and the electronic client is normal, but the network is not available because the relevant network data is not transmitted. If the lights on the WAN port are on or not, first turn off your wireless router and modem, reboot after a few minutes and check if it's OK.

If the problem persists, we recommend that you call the internet company's support department directly for a repair. If the typical WAN light is not healthy, there may be a malfunction on the external network or modem.