Code of Practice for the Safe Use of Chemicals Cleaning Agents for Garments 10

Special care should be taken to keep it in a cool place and out of reach of children.

It's as harmful as paint.

1.What is the difference between a water-based cleaner and an oil-based cleaner?

The environmentally friendly cleaning agent is water-based, can be miscible with water in any proportion, can clean the oil stain on the metal surface, is suitable for ultrasonic and spray mechanical operation, and can adopt a phosphorus-free formula according to customer requirements. It has a short-term anti-rust function.

Oil-based cleaners cannot be used with water, and they are characterized by fast volatilization, and like alcohol, they can remove latex in addition to removing grease. For cleaning the same workpiece, water-based cleaners are more cost-effective than oil-based cleaners.

In a comprehensive comparison, the use of water-based cleaning agents is environmentally friendly and energy-saving, and cost-effective.

2.What should be the concentration range for water-based and oil-based cleaners?

The concentration of water-based cleaning agent has a great relationship with the cleaning effect, and generally with the increase of the use concentration, the degreasing ability is also correspondingly enhanced. The water ** of our company's HZJ series belongs to the concentration of oil cleaning agent, which is generally controlled according to the degree of oil pollution of the object to be cleaned. The proportion of heavy oil pollution can be larger, and the proportion of light oil pollution can be smaller.

Use oil-based cleaners: Use directly, not mixed with water.

3.Points to note during storage of water-based cleaning agents:

Water-based cleaners are stored as general chemicals.

1. Before buying detergent, managers must first clarify the following aspects. (1) What kind of detergents are needed and where they will be used. (2) How much detergent is needed, how long can it be used for a purchase, and whether it is reasonable to buy in bulk or in small quantities.

3) Which existing manufacturers' products can be consulted, and whether the factory has after-sales service. (4) Acceptable ** (**). (5) Shop around.

6) The purchase of detergent depends on the concentration. (7) When buying detergent, you should choose liquid detergent. (8) When purchasing detergent, the quality can not be determined by the amount of foam, but should look at its decontamination effect, the degree of damage to the object and safety, and the manufacturer should be required to demonstrate, and provide good after-sales service.

9) Choose eco-friendly.

2. Good control of the use of detergents? (1) After the bulk detergent is diluted, it is best to install it in a high-pressure bottle and use it by squeezing. (2) Train employees to use the placement cleaner correctly and operate it according to the prescribed procedures.

3) Use in a well-ventilated area. (4) Do not use detergents in places similar to open flames, such as next to lights or heaters. (5) For use, it should be equipped with corresponding protective equipment, such as rubber gloves.

6) Usually do more maintenance and try to do less cleaning work. When the object is not too dirty, using an appropriate amount of detergent not only saves time and detergent, but also benefits the maintenance of the object and prolongs the service life of the item. Do not use a large amount of detergent when the object is very "dirty", which is time-consuming and laborious, the effect is not good, and the damage to the object is also great.

3. What is the safety management of good detergents? (1) Formulate corresponding rules and regulations, train waiters to master the correct way to use and place detergents, and pay attention to checking and reminding waiters to operate in strict accordance with regulations. (2) The detergent with strong acid and alkali should be diluted first, and then packed in the watering can as much as possible, and then distributed to the waiter.

3) Equipped with appropriate protective equipment, such as suitable cleaning tools, protective gloves, etc. (4) Waiters are prohibited from smoking in the work area. Strict investigation and punishment to reduce the source of harm.

The comprehensive cost of cleaning is low, the corrosion of the equipment is very small, the waste liquid is not neutralized, and the excessive resource consumption is not caused. The cleaning process does not leave insoluble matter on the surface of the cleaning object, does not produce new fouling, does not form a new covering layer harmful to the subsequent process, and does not affect the quality of the product. The cleaning agent is non-toxic or low-toxic to organisms and the environment, and the waste gas, waste liquid and waste residue generated are non-polluting, and should be able to be treated to meet the requirements of relevant national laws and regulations.

There are no foams and odors that affect the cleaning process and on-site hygiene.

Requirements: (1) The speed of cleaning the dirt is fast and the scale is completely dissolved. The cleaning agent itself has a strong ability to react, disperse or dissolve the dirt, and can remove the dirt more thoroughly in a limited construction period.

2) The damage to the cleaning object should be within the limit of the production license, and there are corresponding inhibition measures for the corrosion that may be caused by the metal, and the corrosion of the metal is extremely low. (3) The comprehensive cost of cleaning is low, the corrosion of the equipment is very small, there is no need to neutralize the waste liquid, and it does not cause excessive resource consumption. (4) The cleaning agent is non-toxic or low-toxic to organisms and the environment, and the waste gas, waste liquid and waste residue generated are non-polluting, and should be able to be treated to meet the requirements of relevant national laws and regulations.

5) The cleaning process does not leave insoluble matter on the surface of the cleaning object, does not produce new fouling, does not form a new covering layer harmful to the subsequent process, and does not affect the quality of the product. (6) There is no foam and odor that affect the cleaning process and on-site hygiene.

The precautions for chemicals must be written separately, generally there can be no general, normally each chemical has a safety data sheet (MSDS), which will have all the precautions, you just need to make up a copy of this.

If you don't want to compile it separately and compile a large range, just say that you can operate it according to the safety data sheet of the chemical.

Pay attention to safety and pay attention to corrosion prevention.

Generally speaking, as long as it is not eaten, it is not harmful to the human body, and you can find out about Hingare.

1. Pour water into a clean tank, stir while adding the agent until it is completely mixed and ready to use.

2. Please wear protective gloves as much as possible when using them and place them in a cool and dry place.

3. After cleaning, the surface of the workpiece should be rinsed with water.