win10 how to partition the system hard disk

When the computer installs the system, it needs to wake up the partition of the hard disk, which can not only manage the files, but also play a certain role in protecting the computer system. For Microsoft's recently released win10 system, the hard disk also needs to be partitioned when it is installed. The following Netman brings you the operation method of win10 hard disk partition:

After starting the win10 installer, until the time to choose which hard disk partition to install the system, if it is a new hard disk, it will be divided into zones to install the system.

Checked"No space is allocated", click"New"。

C disk to a 30g or so, about 30000MB, click"Applications"。

This so-called extra partition, give it. It's very troublesome not to give, be decisive"OK"。

Click again"No space is allocated", D disk also gives 30g, about 30000MBAgain"Applications"。

The installer has a hard flaw, including the extra partitions, it can only have four partitions. So, give the rest to the e-disk, point"Applications"。

After the partition is completed, in order to use it normally, you have to format each partition.

Generally speaking, it is four partitions, one is the system disk, one is the application software disk, one is the backup disk, and the other is the data disk.

If it is a small hard disk, such as a 120G SSD, it can be divided into two partitions, one partition for the system disk, one partition for the application software disk, and the large data can be stored through the mechanical hard disk.

Step 1Right-click on This PC, select Manage, and then select Disk Management in the left list of the Computer Management window. In Windows 10, you can also right-click on the start menu and directly select the "Disk Management" function.

<> step 2In the partition list, right-click on the part you want to repartition, select "Compress Volume", and the system will give you the available compressed capacity after analysis.

<> step 3Enter the size of the capacity you want to split.

Note that if it is a system disk, it should have at least 50GB of capacity. After determining the capacity, click "Compress", and when you are done, you will see an unpartitioned free space added to the partition list.

It should be noted here that because the Windows system is calculated according to 1024MB=1GB, and the hard disk manufacturers are converted according to 1000MB=1GB, if you directly input 10000MB, you will not get a 100GB partition.

Step 4Create a simple volume.

Repartitioning into one or more partitions is fine. Just right-click on the space, select "New Simple Volume", and then press the prompt "Next".

Step 5Allocate capacity to other partitions.

For unallocated space, you can also choose to assign it to any of the existing partitions, right-click on the selected partition, select "Extend Volume", and then follow the prompts.

1.Right-click on My Computer and select Manage. After entering the management interface, click to enter Disk Management.

2.Select a partition of your current computer, right-click, and select the compressed volume.

3.Enter the amount of compressed space, which is the size of the new partition you want to create. (If you want to create a 100G partition, enter 100 * 1024 = 102400), and 100GB per disk partition is recommended

4.You'll then be able to see your new partition, then right-click on it and select New Simple Volume.

5.Follow the prompts, set the drive letter, and the next step, a new partition will be created. If you want to create several partitions, just repeat the steps above.

Steps to partition win10 system:

Method 1: Windows 10 Disk Management Software.

1.Right-click "Computer" and select the "Manage" tab. Open the Computer Management window.

2.Select Storage Management to open the Disk Management page.

3.Right-click to select the disk you want to compress (in this case, select disk D), select "Compress Volume" in the shortcut, and fill in the amount of space to be compressed in the input compressed space (MB), if you want to compress 50G, fill in 50*1024=51200, and select"Compression"Button.

4.After compression, you will find an extra unpartitioned disk (green partition); Right-click the shortcut menu and select "New Partition" to open the New Simple Volume Wizard, go all the way to the next step, fill in the size of the disk you want to create in the Simple Volume Size, next step.

5.Select the drive Disk Letter, Next.

6.Select the file system format and tick the next step before performing the quick format.

7.Click the "Finish" button to complete the creation of the disk.

The operation of win10 computer hard disk partitioning is as follows:

Method 1: (Manual partitioning) Computer - Management (right-click on the computer) - Disk Management - Select Extent (Disk) - Compress Volume (The current computer memory is calculated according to 1000m=1g), you can refer to Method 2: Use the partition tool. When ghost is used as a system, in PE mode (generally encapsulated partition tools), you can use partition tools to name your own partitions. For example, DiskGenius can be used for reference.

Partition has little to do with the system, all partitions are the same with tool partitions, there are a lot of partition tools not to say one by one, there are a lot of partition tools in PE, you can also use PE, there are many options after startup, there are password clearing, system disk installation, enter PE, hard disk detection and a series of options, you just need to find the option of partition.

Win10 how to partition.

Before proceeding with the partition, we must enter the disk management of the system. There are two ways to enter Disk Management. One is to enter Disk Management through the computer properties. The second is to directly right-click the Windows key (Windows+X) and select Disk Management.

Once we are in Disk Management, we can see how my partitions are doing. Then select the disk you want to partition, right-click, and select "Compress Volume".

Then the system will automatically query the compressed space.

Then we choose the size of the space we want to compress. Click Compress.

Wait a while, and the space will be compressed. An available space will appear. That's the space we've just condensed.

Then we select the blank partition, right-click, and select "New Simple Volume".

Enter the New Simple Volume Wizard, and we will click "Next" directly.

Then we specify the size of the volume, and we can enter the size we want. Then click "Next".

For the simple volume you created, select the drive letter.

Then select the disk format for your newly created simple volume, here we generally choose "ntfs".

Finally, we click Done. Just wait a while.