Why can t Canon camera use mini SD to SD card memory card?

The card holder of the microSD card plus SD can be used, and there is no reason why the miniSD cannot be used. However, I have personally had Sony's memory stick duo inserted into other brands of MS card holders, which can be used on the computer but on the camera, there is often a problem of "memory card needs to be formatted". Later, I changed Sony's own MS card sleeve, and the problem was solved.

Therefore, it is recommended that you use a good SD card holder, such as Sandisk or Kingston. There is also the biggest problem with SD cards nowadays is speed. The speed of many domestic brands is not fast enough, and there will often be incompatibility problems in continuous shooting and storage of cameras.

You can try it with a different brand of miniSD card. It is recommended to use SanDisk or Kingston for compatibility and speed.

Canon camera cannot convert memory card with Mini SD to SD card for the following reasons:

1. The format is not supported, and the SD card has three formats: SD, SDHC and SDXC;

2. The capacity is not supported, check whether the maximum capacity of the SD card supported by the camera is exceeded;

3. Is the mini SD compatible with the card sleeve format?

Do you use a card sleeve, if you use a standard miniSD card to SD card card holder, you can use it on a Canon camera, provided that the size of this card holder and SD card are the same.

I use a MiCrossd card, and it's perfectly fine to insert it into the sleeve of the SD card and then plug it into the camera.

Or the reason why the interface of the card is not unified, that kind of card is mainly for Samsung cameras and Nokia mobile phones!

The interface should be the same

It can be used on a computer

Looking forward to a solution.

If your phone's memory card can't store data, we recommend that you try

1.Check if the memory card has sufficient memory capacity.

2.If there is enough memory, please remove the SD card and reinsert it.

3.If it doesn't work, put the SD card into another device to see if it can be used normally and rule out whether it is an SD card.

4.If it can be used normally in other mobile phones, please back up the data in the SD card and try to format the SD card (Note: If you are using a computer for formatting, please select Format-File System-FAT32 or FAT after right-clicking).

5.If it doesn't work, try to update the system version of your phone: please go to Settings - About Phone (About Device) - Software Update (System Update) - Update (please back up the data in your device before upgrading).

6.Try replacing another memory card.

If the problem persists, it is recommended that you bring the purchase invoice, repair card and machine to the Samsung service center for inspection.

Is the SD storage full, check the SD space. If it is not full, it is recommended to set the priority storage location to SD card in the photo interface. The camera --- set --- other --- priority storage location --- SD card, and then file management --- internal storage ---DCIM---camera, you can copy the previous one to the SD card and try again.

If your Samsung phone can't save to the memory card after taking a photo, it is recommended that you:

1.Check the storage path: Camera - Settings (gear icon) - (Settings) - Memory - Select "Memory Card" and shoot again.

2.Take out the memory card and reinsert it.

3.Check if other files can be saved to the memory card.

4.Back up the files from the SD card, format the memory card to FAT format attempt.

5.Replace another memory card attempt.

6.Back up data (contacts, text messages, **, etc.), factory reset (Settings - Reset Privacy - Factory Reset) attempt.

If the problem persists, it is recommended that you bring your mobile phone, purchase invoice, and repair card to your local Samsung after-sales service center for testing.

You can use a card sleeve As long as there is a card sleeve, the mobile phone memory card can be used.

I bought all the SLRs, but I am still short of the money of such a small card? Plus conversion card can be used, but SLR is best to use a high-speed card, your mini card high-speed?

Hello! In the case of photo backup, try to use the camera function to format it, if not, try to replace the memory card, if it doesn't work, the memory card slot is faulty, and it can only be sent for repair.

Take out the memory card and put it on the computer, see if you can read the data, if you can't read the data, the memory card is broken, and if you can read it, it means that there is a problem with the camera.

May be damaged. It is also possible that the card slot is not in good contact.

You can try it with a different card.

Oops,This kind of original simplest thing,Now no one will,You export it,Format the memory card,That's it.。

Is there a write operation on the computer? If so, format it on your computer and try it on your camera.

To see the camera, some camera memory cards are used as caches, and some memory cards are relatively small, and only a small amount can be stored**, set the storage location.

Put the sensitive. Keep an eye on the memory card.

Unplug it and reformat it on the computer with the card reader, and the file system must be in FAT format so that the camera can recognize it.

First, the cause of the failure:

1. The memory card is not inserted into the camera correctly (loose or other reasons), resulting in the camera not being readable.

2. The metal contacts of the memory card are oxidized, take them out and clean them, and reinstall them for testing to see if they can be read normally.

3. The memory card is in protected mode or locked.

4. Memory card poisoning.

5. There is a logical fault in the memory card, which can be solved by formatting in general.

6. The memory card has been damaged.

2. Solution:

1. The more direct way is to take out the memory card, and then put the computer's card reader to read it directly.

2. You can use a data cable to connect the camera to the computer to read, and some cameras may need to install drivers.

There should be a lever on the card to dial to the opposite position of the lock.

When there is a problem with a memory card, it doesn't look the same, but it comes down to the memory card. You can check it out for yourself.

1. Take out the memory card from the camera, take pictures with the camera's own memory, play back and delete it, and see if the camera can operate normally. If everything looks good, it's not a problem with the camera.

2. Select "Reset" in the settings to restore the camera to factory settings, this operation will not have any effect on the camera.

3. If the problem is still there, it is recommended to replace the memory card, if the old card can be used in the card reader, it can be used as a U disk to store other files, ** is very precious, so the card used on the camera must ensure that the reading is normal. Nowadays, memory cards are not expensive, and you can buy a 4G large-capacity card for about 100 yuan. It is recommended to choose a big brand of memory card, such as Kingston, Sandisk, etc., and the quality and after-sales are more ***.

How big SD does this machine support?

It is possible to overshoot.

It is best to use the original factory.

It is estimated that the SD card you bought is of the SDHC type Kodak's camera may not be supported.

Otherwise, you can try to change the camera.

Older cameras may be supported with larger capacity cards.

Put the card in the camera and format it. The camera file partition format is FAT16, which is different from the computer. Cards formatted on a computer often don't work well in the camera.

The general card machine SD card is divided into folders by the system at the beginning, and CDIM is a folder where the camera is stored. The photos you took are stored in this folder, and the folder on your computer is still there

Some Kodak cameras have SDs that are not supported.

Try a different SD card.